• 한국버섯학회지
• /
• 제12권3호
• /
• pp.171-180
• /
• 2014

느타리버섯류(Pleurotus spp.) 우량 품종개발에 많이 이용되는 교잡육종법 중에서 단핵-단핵간(mono-mono) 교잡에 관한 특성을 구명하기 위하여 느타리 6계통 및 사철느타리 1계통으로 단핵-단핵간 7조합 85개 교잡주를 얻어 교잡율, 핵 DNA 패턴 양상, 자실체의 갓 색깔과 수량성을 분석한 결과는 다음과 같다. 단핵-단핵간 교잡율은 50~93.75%로 나타났으며, 단핵간 85 교잡주의 핵 DNA 양상을 분석한 결과 양친주의 핵을 공유하고 있어 DNA 패턴은 양친의 중간이지만 유전유사도는 어느 한쪽 친주와 조금 더 가까운 양상을 나타냈다. 계통간교잡주 모두 양친의 핵이 공존하는 DNA 패턴을 나타내었지만 양친 중 한쪽 친과 유연관계가 가까운 것으로 나타났다. 사철느타리와 느타리간 교잡주는 유사도가 사철느타리에 가까웠고, 느타리간의 교잡주도 한쪽 모균주에 가까운 유연관계로 나타났다. 단핵-단핵간 교잡에서 자실체 갓 색은 사철느타리와 느타리간 교잡주는 대부분 양친주의 중간정도의 색을 나타냈으나 양친주 중 어느 한 쪽 친주에 좀 더 가까운 갓 색을 띄는 경향을 나타냈다. 자실체 수량성은 느타리간의 교잡주는 양친과 유사한 것이 82 %, 양친보다 높은 것이 0%, 양친보다 낮은 것이 18%였다. 본 연구는 느타리 계통간 교잡주의 핵 DNA 양상과 자실체 특성을 구명하였다. 단핵-단핵간 교잡법의 장점을 충분히 활용하여 앞으로 육종방법으로서 느타리버섯류의 우량 품종을 개발하는데 유용하게 이용될 수 있을 것으로 기대된다.

• Applied Biological Chemistry
• /
• 제16권2호
• /
• pp.85-93
• /
• 1973

탁주료의 발효(醱酵)에 미치는 효모(酵母)의 종류(種類)와 담금조건(條件)의 영향을 검토(檢討)하여 다음의 결과(結果)를 얻었다. 1. 효모(酵母)의 종류(種類)와 료중의 효모수(酵母數) (1) 일단료를 $20^{\circ}C$에서 $1.5{\sim}2.5$일간(日間) 발효(醱酵)시키거나 $25^{\circ}C$와 $30^{\circ}C$에서 $1{\sim}2$일간(日間) 발효(醱酵)시킨 경우 효모분포(酵母分布)에 있어서 탁주효모(濁酒酵母)인 strain $D_m-1$과 청주효모(淸酒酵母)인 strain No.7사이에 별(別)로 차(差)가 없었다. (2) 이단료를 고온(高溫)($30^{\circ}C$ 또는 $35^{\circ}C$)에서 발효(醱酵)시킨 경우에는 저온발효(低溫醱酵)의 경우에 비(比)하여 료중의 효모수(酵母數)가 감소(減少)되었으나 탁주효모(濁酒酵母)인 strain $D_m-1$의 료중의 생존효모수(生存酵母數)는 청주효모(淸酒酵母)인 strain. No.7의 것보다 훨씬 많았다. 2. 효모(酵母)의 종류(種類)와 숙성료의 성분(成分) (1) 이단료를 고온(高溫) ($30^{\circ}C$ 또는 $35^{\circ}C$)에서 발효(醱酵)시킨 경우 선정(選定)한 탁주효모(濁酒酵母)(strain $D_m-1$, strain Y-1)을 使用한 숙성료의 주도(酒度)는 타효모(他酵母)(strain No.7, strain No.6, strain No.396, 및 strain No.1)를 사용(使用)한 것보다 상당(相當)히 높았다. (2) 료의 산도(酸度)는 strain $D_m-1$과 strain No.7사이에 약간 차이(差異)가 있었다. (3) 이단료를 고온(高溫) ($30^{\circ}C$ 또는 $35^{\circ}C$)에서 발효(醱酵)시킨 경우 strain $D_m-1$을 사용(使用)한 료의 Formol-N는 strain No.7을 사용(使用)한것보다 상당(相當)히 적었다. 3. 담금조건(條件)과 료의 주도(酒度) (1) 밀기울국(麴)의 첨가량(添加量)은 원료(原料)에 대하여 3%가 적당(適當)하였으며 밀가루국(麴)과 혼용(混用)할때에는 밀가루국(麴) 20%, 밀기울국(麴)은 $1{\sim}2%$를 사용(使用)하는 것이 적당(適當)하였다. (2) 일단료의 담금농도(濃度)를 보통(普通)것의 2배(倍)로 희석(稀釋)하여도 효모(酵母)의 증식(增殖)에 이상(異常)이 없었다. (3) 담금용수(用水) 180ml에 대하여 밀가루 $80{\sim}140g$를 사용(使用)한 경우 원료(原料)밀가루량(量)의 증가(增加)에 따라 료의 주도(酒度)가 대략(大略) 비례적(比例的)으로 올랐다. (4) 현행(現行)의 이단식(二段式)담금법(法)보다 삼단식(三段式)담금법(法)이 유리(有利)하다고 인정(認定)되었다.

• 한국양봉학회지
• /
• 제34권4호
• /
• pp.285-293
• /
• 2019

The honey bee queen shows extreme polyandry and controlling the mating partners can only be possible either by artificial insemination or having remote isolated mating locations. Here we report on the German North Sea island of Heligoland. Because of its location 60 km from the mainland, the lack of a local population of honey bees, its size of just 1.4 ㎢ and suitable weather conditions during the months of May to July, it is considered an ideal location for controlled inseminations of high-quality virgin queen bees with drones deemed genetically superior to others. Methods how to rear virgin queen bees are described and information is provided on the numbers of queen bees, their supporting workers and drone bees that are taken to the island in the mating season. The bee most commonly involved in the Heligoland mating trials has become Apis mellifera carnica strain "Baltica". In one summer, for example, 80 virgin queens (belonging to beekeepers from nine different locations in northern Germany) each with about 600 worker bees plus two drone populations of around 2,000 drones were taken by ship to Heligoland. On their return to the mainland no later than 3.5 weeks after the mating exercise, the beekeepers could register a mating success rate of 80%. This information can help operation management of the new remote mating centre of Weedo Island, Jeonbuk in Korea, which is currently under construction.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권2호
• /
• pp.111-117
• /
• 2001

There are three designs of thread form in screw type implants: V-thread, Reverse buttress thread and Square thread. The purpose of this study was to find out how thread form designs have an influence on the equivalent stress, equivalent strain, maximum shear stress and maximum shear strain and which design of thread form generates more maximum equivalent stress and strain. 3-D finite element analysis was used to evaluate the stress and strain patterns of three tread types. The results of this study were as follow. 1. Under the 200N of axial load, the value of maximum equivalent stress is smallest in square thread and there is no significant difference between that of V thread and reverse buttress thread. 2. Under the 200N of axial load, the value of maximum equivalent strain is largest in V thread and smallest in square thread. 3. Under the 200N of axial load, the value of maximum shear stress is smallest in square thread and there is no significant difference between that of V thread and reverse buttress thread. 4. Under the 200N of axial load, the value of maximum equivalent strain is largest in V thread and there is no significant difference between that of square thread and reverse buttress thread. 5. Above results show that the square thread has special advantages in stress and strain compared with other thread types, especially in shear stess which is most determinant to implant-bone interface. Considering the superior biomechanical properties of square form implant, we presume that square form implant has better clinical results than the other types of implants in the same clinical conditions.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.363.1-363.1
• /
• 2016

Transparent and stretchable conductors are expected to be an essential component in future stretchable optoelectronic devices. Until now, two main methods have been commonly employed to fabricate transparent and stretchable conductors by using metal nanomaterials: creating buckling configurations and creating network configurations. In this report, a novel strategy for obtaining transparent and stretchable conductors is presented, one that employs these two main approaches simultaneously. To the best of our knowledge, this proposed configuration of a buckled long nanofiber network in this study has not yet been reported. In order to provide the transparent conductors with dual mode stretchability originating from simultaneous buckled and network configurations, a buckled Au@polyvinylpyrrolidone (PVP) nanofiber network (hereafter referred to BANN for convenience) was fabricated by transferring Au-metallized electrospun PVP nanofibers onto a prestrained polydimethylsiloxane (PDMS) substrate. Our BANN shows considerably lower strain sensitivity of resistance than that of straight Au@PVP nanofiber network. Durability tests conducted by performing cyclic tensile strain reveal that the relative change in resistance of BANN (prestrain = 20%) is quite small after 1000 cycles. We also demonstrate that this BANN exhibits superior performance over widely used indium tin oxide conductors with regard to high optical transmittance and low sheet resistance.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.961-980
• /
• 2015

Magnetorheological (MR) fluids are capable of changing their rheological properties under the application of external fields. When MR fluids operate in the so-called squeeze mode, in which displacement levels are limited to a few millimetres but there are large forces, they have many potential applications in vibration isolation. This paper presents an experimental and a numerical investigation of the performance of an MR fluid under tensile and compressive loads and oscillatory squeeze-flow. The performance of the fluid was found to depend dramatically on the strain direction. The shape of the stress-strain hysteresis loops was affected by the strength of the applied field, particularly when the fluid was under tensile loading. In addition, the yield force of the fluid under the oscillatory squeeze-flow mode changed almost linearly with the applied electric or magnetic field. Finally, in order to shed further light on the mechanism of the MR fluid under squeeze operation, computational fluid dynamics analyses of non-Newtonian fluid behaviour using the Bingham-plastic model were carried out. The results confirmed superior fluid performance under compressive inputs.

• 한국식품영양과학회지
• /
• 제33권3호
• /
• pp.566-570
• /
• 2004

공시균인 A .terreus mutant로부터 lovastatin의 생산성을 극대화할 수 있는 조건을 확립하고자 액체 배양법 및 고체 배양법 을 이용하여 HPLC를 통해 분석하였다. Lovastaton의 생산을 위해 액체 배양에서는 균사체 접종법인 No. 2배지를 사용한 전배양 및 본배양법이 포자접종법인 No. 1배지를 사용한 경우보다 lovastatin의 생산이 더 우수하였다. 고체 배양법에서는 분쇄 밀의 호화전분을 사용하여 28$^{\circ}C$, 15일간 배양시 lovastatin의 생산이 가장 우수하였으며 대량배양을 위해 배양용기를 달리하여 배양하였으며 cap을 부착하는 내열성 plastic bag을 이용하여 배양한 결과 두 방향으로 cap을 부착하여 통기량을 조절한 배양에서 lovastatin의 생산이 가장 우수하게 나타났다.

• Journal of Microbiology and Biotechnology
• /
• 제27권1호
• /
• pp.36-42
• /
• 2017

In this work, we isolated a surface layer protein (SLP) from a Bacillus thuringiensis (Bt) strain to evaluate it cytotoxic effects against MDA-MB-231 human breast cancer cells. AP11 was selected from a g roup of Bt strains using SLP olig onucleotides developed from Bacillus conserved regions. The AP11 strain was grown in Luria Bertani medium until the late exponential phase; an 86 kDa protein was extracted using 5 M LiCl and identified by liquid chromatography-tandem mass spectrometry. It corresponded to a multispecies SLP highly similar to previously described SLPs in Bt. The MDA-MB-231 breast cancer cells $LC_{50}$ was obtained using $0.25{\mu}g/ml$ of the isolated SLP. HaCat non-cancerous cells presented 90% survival using the same protein concentration. Our data suggest that SLP cytotoxicity against MDA-MB-231 could be induced by an interaction with the CDH11 cell membrane receptor.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.711-719
• /
• 2017

This study investigates the effects of reinforcing bar diameter and cover depth on the shrinkage behavior of restrained ultra-high-performance fiber-reinforced concrete (UHPFRC) slabs. For this, twelve large-sized UHPFRC slabs with three different rebar diameters ($d_b=9.5$, 15.9, and 22.2 mm) and four different cover depths (h=5, 10, 20, and 30 mm) were fabricated. In addition, a large-sized UHPFRC slab without steel rebar was fabricated for evaluating degree of restraint. Test results revealed that the uses of steel rebar with a large diameter, leading to a larger reinforcement ratio, and a low cover depth are unfavorable regarding the restrained shrinkage performance of UHPFRC slabs, since a larger rebar diameter and a lower cover depth result in a higher degree of restraint. The shrinkage strain near the exposed surface was high because of water evaporation. However, below a depth of 18 mm, the shrinkage strain was seldom influenced by the cover depth; this was because of the very dense microstructure of UHPFRC. Finally, owing to their superior tensile strength, all UHPFRC slabs with steel rebars tested in this study showed no shrinkage cracks until 30 days.

• 한국균학회지
• /
• 제17권1호
• /
• pp.31-34
• /
• 1989

인삼 saponin중 조성비율이 가장 큰 ginsenoside Rb1만을 약효면에서 보다 우수한 ginsenoside Rd로 선택적 전환시킬 수 있는 Rhizopus japonicus를 대상으로 해서 인삼 saponin 전환효소의 최적생산조건을 검토하였다. Wheat bran 배지를 기본으로 할 경우 배양 5일에 가장 많은 효소가 생산되었으며, 인삼류의 천연유기물중에는 홍삼분말을, 저급당류중에는 xylose를, 다당류중에는 laminarin을 flavonoids중에는 naringin을, 질소원중에는 beef extract와 $KNO_3$를 첨가할 경우 인삼 saponin 전환효소가 가장 많이 생산되었다.