• Journal of Hydrospace Technology
• /
• v.2 no.1
• /
• pp.10-17
• /
• 1996

If a point impulse travels over free surface of water of finite depth, surface waves consist of divergent waves. The crestlines of those divergent waves are short and end on the cusp line if the impulse travels at a subcritical speed. But the crestlines become infinitely long and there are no cusps if the impulse travels at a supercritical speed.

• KSBB Journal
• /
• v.24 no.6
• /
• pp.533-540
• /
• 2009

In this work, 5'-nitroindirubinoxime (5'-NIO) has been prepared as solid dispersions using a supercritical aerosol solvent extraction system (ASES) process in order to enhance its water solubility and dissolution rate. Solid dispersions of 5'-NIO and poly(vinyl pyrrolidone) (PVP) were prepared in various weight percent ratios. Three-component solid dispersions consisting of 5'-NIO, PVP, and poloxamer 188 (P188) were also prepared to study the influence of P188 level on their morphology, crystallinity, and dissolution behavior. All samples were prepared at $35^{\circ}C$ and 180 bar using supercritical carbon dioxide. The particle morphology and size of the two-component solid dispersions were found to be nearly spherical and much smaller (100-200 nm) compared with the original 5'-NIO. The morphology of three-component solid dispersions became more agglomerated as the level of P188 increased. The crystallinity of the original 5'-NIO was not observed in the solid dispersions prepared by the ASES process. Faster dissolution rates were observed for the three-componet solid dispersions because the arrangement of ethylene oxide and propylene oxide blocks of the poloxamer 188 enabled the formation of micelles in an aqueous phase.

• Clean Technology
• /
• v.10 no.4
• /
• pp.221-228
• /
• 2004

Ethoxylated Nonyl Phenol Series (NP-series), nonionic surfactants, were applied for forming microemulsions in supercritical $CO_2$. Measurement results of the solubility in supercritical $CO_2$ are in the following; NP-series were high soluble in carbon dioxide in spite of the fact that those were not $CO_2$-philic surfactants traditionally well known. Water in $CO_2$ microemulsions were also formed stably. A complexation of hydrophilic lengths for $CO_2$-philic parts of NP-Series surfactants was optimized by NP-4 surfactant(N=4) for forming the microemulsions through the experiments. Formation of microemulsions was confirmed by measuring the UV-Visible spectrum through a spectroscopic method and existence of water in the microemulsions was confirmed as well. In order to apply it for a metal surface treatment or electroplating, an experiment for forming acid(organic, inorganic) solution in $CO_2$ microemulsions was carried out. Ionic surfactant in the reaction to an acid solution became unstable to form microemulsions, however, nonionic surfactant was formed stably in the reaction. Results of the study will be utilized for expanding the application scope of supercritical $CO_2$ which is an environmental-friendly solvent.

• Journal of Radiation Industry
• /
• v.9 no.4
• /
• pp.217-221
• /
• 2015

When reactor coolant leaks occur due to cracks of a steam generator's tube, radioactive materials contained in the primary cooling water in nuclear power plant are forced out toward the secondary systems. At this time the secondary water purification resin in the ion exchange resin tower of the steam generator blowdown system is contaminated by the radioactivity of the leaked radioactive materials, so we pack this in special containers and store temporarily because we could not dispose it by ourselves. If steam generator tube leakage occurs, it produces contaminated spent resins annually about 5,000~7,000 liters. This may increase the amount of nuclear waste productions, a disposal working cost and a unit price of generating electricity in the plant. For this reasons, it is required to develop a decontamination process technique for reducing the radioactive level of these resins enough to handle by the self-disposal method. In this research, First, Investigated the structure and properties of the ion exchange resin used in a steam generator blowdown system. Second, Checked for a occurrence status of contaminated spent resin and a disposal technology. Third, identified the chemical characteristics of the waste radionuclides of the spent resin, and examined ionic bonding and separation mechanism of radioactive nuclear species and a spent resin. Finally, we carried out the decontamination experiment using chemicals, ultrasound, microbubbles, supercritical carbon dioxide to process these spent resin. In the case of the spent resin decontamination method using chemicals, the higher the concentration of the drug decontamination efficiency was higher. In the ultrasound method, foreign matter of the spent resin was removed and was found that the level of radioactivity is below of the MDA. In the microbubbles method, we found that the concentration of the radioactivity decreased after the experiment, so it can be used to the decontamination process of the spent resin. In supercritical carbon dioxide method, we found that it also had a high decontamination efficiency. According to the results of these experiments, almost all decontamination method had a high efficiency, but considering the amounts of the secondary waste productions and work environment of the nuclear power plant, we judged the ultrasound and supercritical carbon dioxide method are suitable for application to the plant and we established the plant applicable decontamination process system on the basis of these two methods.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.73-82
• /
• 2015

Despite significant effects on macroscopic migration and distribution of CO₂ injected during geological sequestration, only limited information is available on wettability in microscopic scCO₂-brine-mineral systems due to difficulties in pore-scale observation. In this study, a micromodel had been developed to improve our understanding of how scCO₂ flooding and residual characteristics of porewater are affected by the wettability in scCO₂-water-glass bead systems. The micromodel (a transparent pore structure made of glass beads and glass plates) in a pressurized chamber provided the opportunity to visualize scCO₂ spreading and porewater displacement. CO₂ flooding followed by fingering migration and dewatering followed by formation of residual water were observed through an imaging system. Measurement of contact angles of residual porewater in micromodels were conducted to estimate wettability in a scCO₂-water-glass bead system. The measurement revealed that the brine-3M NaCl solution-is a wetting fluid and the surface of glass beads is water-wet. It is also found that the contact angle at equilibrium decreases as the pressure decreases, whereas it increases as the salinity increases. Such changes in wettability may significantly affect the patterns of scCO₂ migration and porewater residence during the process of CO₂ injection into a saline aquifer at high pressures.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.3
• /
• pp.175-182
• /
• 2009

The spent cationic exchange resins and anionic exchange resins were separated from mixed spent exchange resins by a fluidized bed gravimetric separator. The separated resins were identified by an elemental analysis and thermogravimetric analysis. The each test sample was prepared by diluting the slurry made by wet ball milling the cationic exchange resins and the anionic exchange resins separated as a spherical granular form for 24 hours. The resulting test samples showed a slurry form of less than $75{\mu}m$ of particle size and 25,000ppm of $COD_{cr}$. The decomposition conditions of each test samples from a thermal power plant were obtained with a lab-scale(reactor volume : 220mL) supercritical water oxidation(SCWO) facility. Then pilot plant(reactor volume : 24 L) tests were performed with the test samples from a thermal power plant and a nuclear power plant successively. Based on the optimal decomposition conditions and the operation experiences by lab-scale facility and the pilot plant, a commercial plant(capacity : 150kg/h) can be installed in a nuclear power plant was designed.

• KSBB Journal
• /
• v.20 no.3
• /
• pp.205-209
• /
• 2005

Studies for the commercial production of sesame oil using th supercriticl carbon dioxide were made. Characteristics of sesame oil containing one of natural antioxidant 'sesamol', which only exist at sesame seed were also studied during the supercritical fluid extraction. Among the various factors influencing the sesamol contents in the sesame oil, the roasting time and temperature were checked, because sesamol can be converted from sesamol in through pyrolysis. We found that the sesamol content was increased rapidly under the condition of roasting temperature over $200^{\circ}C$ with longer roasting time. The sesamol content was increased as the temperature and pressure increased, which was caused by increase of solubility of sesamol against sesamol oil. And the sesamol content was increased also with lower speed of supercritical fluid, which increased the contact time with the raw material. The sesamol content was also increased using water increase up to $1\%$ as the entrainer. When the extraction performance with the supercritical fluid was compared to the conventional compressed extraction, the sesamol content was increased up to 11.5 times with the entrainer.

• Journal of Korea Water Resources Association
• /
• v.34 no.1
• /
• pp.45-55
• /
• 2001

Transcritical flow is a term intended to denote the existence of both supercritical and subcritical flows within a computational domain. The major problems that need to be addressed while modeling transcritical flows include handling the differing features of signal propagation in subcritical and supercritical flow regions and maintaining conservation. The present study proposes the implicit ENO method as a high-resolution scheme for transcritical flow. This implicit ENO scheme is based on the ENO method, a new class of uniformly high-order-accurate essentially non-oscillatory implicit scheme, which has the advantage of unconditional stability. The implicit ENO scheme has not been used for the transcritical flow in open channel until now. As a result of application to the hypothetical dam-break flow, the implicit ENO scheme was ploved to produce accurate results with good robustness even though in the case of verb strong shock wave.

• Archives of Pharmacal Research
• /
• v.28 no.7
• /
• pp.866-874
• /
• 2005

The objective of this study was to elucidate the feasibility to improve the solubility and bioavailability of poorly water-soluble itraconazole via solid dispersions by using supercritical fluid (SCF). Solid dispersions of itraconazole with hydrophilic polymer, HPMC 2910, were prepared by the aerosol solvent extraction system (ASES) under different process conditions of temperature/pressure. The particle size of solid dispersions ranged from 100 to 500 nm. The equilibrium solubility increased with decrease (15 to 10 MPa) in pressure and increase (40 to $60^{\circ}C$) in temperature. The solid dispersions prepared at $60^{\circ}C$/15 MPa showed a slight increase in equilibrium solubility (approximately 27-fold increase) when compared to pure itraconazole, while those prepared at $60^{\circ}C$/10MPa showed approximately 610-fold increase and no endothermic peaks corresponding to pure itraconazole were observed, indicating that itraconazole might be molecularly dispersed in HPMC 2910 in the amorphous form. The amorphous state of itraconazole was confirmed by DSC/XRD data. The pharmacokinetic parameters of the ASES-processed solid dispersions, such as $T_{max},\;C_{max},\;and\;AUC_{0-24h}$ were almost similar to $Sporanox_{\circledR}$ capsule which shows high bioavailability. Hence, it was concluded that the ASES process could be a promising technique to reduce particle size and/or prepare amorphous solid dispersion of drugs in order to improve the solubility and bioavailability of poorly water-soluble drugs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.470-475
• /
• 2012

The downstream piping system of the water supply system in a supercritical power plant is affected by the fluctuation pressure waves induced by accessing to the acoustic modes of the piping systems with the rotation and impeller passing pulsations of the feed water pump. There are the phenomena amplified at the same time in the range of 415 ~ 455Hz, 830 ~ 910Hz, 1245 ~ 1365Hz and 1660 ~ 1820Hz on the spectrums of the vibration, the sound pressure, and the pressure fluctuation waves.