• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.831-834
• /
• 2002

Several companies in the world are marketing superconducting wires, films and bulks. High-Tc superconducting systems using these superconductors are begun to commercialize. For the successful realization or commercialization of superconducting system used Bi-2223 wires, the database on the degradation of critical current is essentially needed. In this paper, the electrical degradation of a Bi-2223 wires is measured. The electrical degradation rate was measured after the certain time of continuous current transportation. Specimens have the length of 190cm and double-pancakes coil have the length of 10m were tested. Tested Bi-2223 wires are commercialized product has 115A of Ic. When the transportation current was 95% of Ie, the degradation of Ic was appeared after 5 hours of transportation time. When the transferred current is enough larger than Ic, Bi-2223 double pancake is damaged seriously.

• 한국초전도저온공학회지:초전도와저온공학
• /
• 제20권2호
• /
• pp.15-22
• /
• 2018

The present article briefly overviews the plan for a new project on joint technology for HTS wires/cables and describes the development plan for the world's highest field NMR magnet, which is a major development item in the project. For full-fledged social implementation of superconducting devices, high temperature superconducting (HTS) wire is a key technology since they can be cooled by liquid nitrogen and they can generate a super-high magnetic field of >>24 T at liquid helium temperatures. However, one of the major drawbacks of the HTS wires is their availability only in short lengths of a single piece of wire. This necessitates a number of joints being installed in superconducting devices, resulting in a difficult manufacturing process and a large joint resistance. In Japan, a large-scale project has commenced, including two technical demonstration items: (i) Development of superconducting joints between HTS wires, which are used in the world's highest field 1.3 GHz (30.5 T) NMR magnet in persistent current mode; the joints performance is evaluated based on NMR spectra for proteins. (ii) Development of ultra-low resistive joints between DC superconducting feeder cables for railway systems. The project starts a new initiative of next generation super-high field NMR development as well as that of realization of better superconducting power cables.

• 한국전자통신학회논문지
• /
• 제17권2호
• /
• pp.279-290
• /
• 2022

초전도 한류기는 초전도 전이를 이용하여 전류를 제어하는 전력기기로, 수 msec 이내에 고장전류를 정상전류로 변환하여 전력계통의 유연성, 안정성 및 신뢰성을 높일 수 있는 기기이다. 고온초전도 선재는 상전이 속도가 빠르고 임계전류밀도가 높으며 교류손실이 적어 초전도 한류기에 적합한 소재이지만 최적화 연구가 부족함에 따라 고온초전도 선재 특성에 의존하는 기존 방식은 한류소자의 설계, 투입 선재의 양 등에 있어 비효율적이다. 따라서 초전도 한류기에 적합한 선재를 개발하기 위해 임계전류 균일도 향상, 최적의 안정화재 재료 선정 및 균일 적층 기술 개발 연구가 수행되었다. 본 연구를 통하여 개발된 고온 초전도 선재는 710m 길이에서 평균 804 A/12mm-w의 임계전류를 가지는 선재제조 기술을 확보함에 따라 효율성 향상, 비용 절감 및 크기 축소로 경제적 성과를 확보할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1556-1558
• /
• 1999

$Nb_3Sn$ superconducting wires were fabricated in order to investigate the effect of pre-heat treatment for internal tin process. 2 types of Sn reservoir were fabricated. One was arranged one large Sn reservoir in the center of wire, the other arranged several Sn reservoirs inthe wire. Diffusion of Sn is better in the strand divided Sn equally than in the strand had one large Sn reservoir during pre heat-treatment. Critical current was better in the wires divided Sn reservoirs uniformly after whole heat treatment.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권4호
• /
• pp.320-326
• /
• 1997

The stability of Bi-based superconducting wires cooled by a cryocooler was studied by considering the temperature dependency of critical current and electrical resistivity. The critical current measured in 23 K was about 7 times higher than that measured in liquid nitrogen of 77 K. The stability behavior of Bi based multifilament wires subjected to a thermal disturbance, which was simulated with a electric heater, was investigated by measuring the variation of voltage drop with time. Current sharing was occurred, and recovery to superconductivity was measured in the wire after removing heater power.

• Progress in Superconductivity
• /
• 제12권2호
• /
• pp.75-81
• /
• 2011

We report on the progress that has been made in developing $MgB_2$ superconducting wires and tapes for commercialization and research efforts. A number of techniques have been developed to overcome the obstacle posed by the poor critical current density ($J_c$) of pristine $MgB_2$. Chemical doping has proved to be the effective way to modify and enhance the superconducting properties, such as the $J_c$ and the irreversibility field ($B_{irr}$). More than 100 different types of dopants have been investigated over the past 8 years. Among these, the most effective dopants have been identified to be SiC and malic acid ($C_4H_6O_5$). The best results, viz. a $B_{irr}$ of 22 T and $J_c$ of $30,000\;A{\cdot}cm^{-2}$ at 4.2 K and 10 T, were reported for malic acid doped $MgB_2$ wires, which matched the benchmark performance of commercial low temperature superconductor wires. In this work, we discuss the progress made in $MgB_2$ conductors over the past few years at the University of Wollongong, Hyper Tech Research, Inc., and Ohio State University.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.220-223
• /
• 2003

High-Tc superconducting(HT S) systems are commercialized by many study on high-Tc superconductor. For the successful commercialization of superconducting systems using Bi-2223 wires, the database on the degradation of critical current is essentially needed. In this paper, critical current variation of Bi-2223 wires according to the transport time was investigated. The degradation rate of critical current was also calculated. Solenoid type specimens have the length of 190cm Bi-2223 wire and double-pancake type specimens have the length of l0m wire were tested. Tested Bi-2223 wires are commercialized products of AMSC (American Superconductor) and Innost. When the transportation current was 95% of critical current, the degradation of critical current was appeared after 5 hours of transport time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1494-1496
• /
• 1997

The MRI Magnet is a most practical application of NbTi superconductor. In this paper, we present the main research results on superconducting wires for MRI magnet which we have developed. Cu/NbTi superconducting wires were fabricated by repeat of cold working and heat-treating process after that billets were extruded. We investigated the relation of superconductivities of wires and heat treatment condition. The correlation between cross section shape of wires and work inhomogeneity of NbTi rods was investigated by microscopic observation. The more repeatation number of cold working and heat-treating process, the higher critical current is achieved.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권2호
• /
• pp.30-33
• /
• 2008

Several kinds of superconducting fault current limiters (SFCLs), which reduces huge fault current, have been developing by many research groups. The SFCL has no impedance during normal operation, so it dose not give any influence to electric power system. The resistive type SFCL reduces the fault current with the impedance generated in the superconducting part of the SFCL when the fault current exceeds the critical current of SFCL. In this paper, a new type resistive SFCL made of bifilar coil wound with two different high-Tc superconducting (HTS) wires in parallel. Although a bifilar coil has theoretically no inductance, the bifilar coil made in this paper could generate inductance at fault. The specifications of the used two wires were considerably different, thus current distribution between the two HTS wire was different at fault. When the fault current exceeded the critical current of one wire in the bifilar coil, the momentary sharp increase of impedance was detected. Base on the results, a new resistive type SFCL can generate not only resistance but also inductance, which can be used to control a fault current in the future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.597-600
• /
• 2003

Bi-2223/Ag HTS wires have been fabricated by the PIT(powder in tube)process. Intermediate annealing was carried out to increase the homogenization and uniformity of the superconducting filaments embedded in the silver matrix during the deformation process that is important to sustain the engineering critical current density in long superconducting wire. Intermediate annealing act to release the deformation hardening of the superconducting wires during drawing process. Rolling parameters were investigated to roll the superconducting tapes with uniform thickness, width and winding tensions. Critical current of 60 m long superconducting tapes was measured 54.3 A continuously after final sintering heat treatment. The phase analysis of Bi-2223/Ag superconducting tapes are examined by the XRD.