• 청정기술
• /
• 제14권1호
• /
• pp.35-39
• /
• 2008

본 연구에서는 용매에 따른 고분자의 용해도 차이를 이용하여 슬라이드글라스 표면위에 초소수성 고분자막을 성공적으로 제조하였다. 폴리스타이렌 (PS)을 tetrahydrofuran (THF)에 녹인 후 다시 에탄올(EtOH)을 첨가하여 두 용매의 용해도 차이로 표면에 초소수성 성질을 갖게 제조하였다. 한편, EtOH 첨가, 코팅방법, 용액혼합 시간과 속도 및 다른 알콜들이 형성된 표면의 소수성에 미치는 영향들을 각각 조사하였다. 접촉 각 측정기를 사용하여 측정한 결과 $150^{\circ}$ 이상의 물 접촉각을 확인하였고, 광학현미경(optical microscopy)과 주사전자현미경(scanning electron microscope, SEM)으로 관찰한 표면 구조는 $5\;{\mu}m$ 이하의 입자들로 구성된 미세다공성 구조임이 확인되었다.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.188-193
• /
• 2011

A highly efficient AC-DC converter for small wind power generation systems using a brushless DC generator (BLDCG) is presented in this paper. The market standard AC-DC converter for a BLDCG consists of a three-phase diode rectifier and a boost DC-DC converter, which has an IGBT and a fast recovery diode (FRD). This kind of two-stage solution basically suffers from a large amount of conduction loss and the efficiency greatly decreases under a light load, or at a low current, because of the switching devices with a P-N junction. In order to overcome this low efficiency, especially at a low current, a three-phase bridgcless converter consisting of three upper side FRDs and three lower side Super Junction FETs is presented. In the overall operating speed region, including the cut-in speed, the efficiency of the proposed converter is improved by up to 99%. Such a remarkable result is validated and compared with conventional solutions by calculating the power loss based on I-V curves and the switching loss data of the adopted commercial switches and the current waveforms obtained through PSIM simulations.

• Journal of Communications and Networks
• /
• 제16권2호
• /
• pp.238-244
• /
• 2014

A key technical challenge in TV white spaces is the efficient spectrum usage without interfering with primary users. This paper considers available spectrum discovery scheme using in-band sensing signal to support super Wi-Fi services effectively. The proposed scheme in this paper adopts non-contiguous orthogonal frequency-division multiplexing (NC-OFDM) to utilize the fragmented channel in TV white space due to microphones while this channel cannot be used in IEEE 802.11af. The proposed solution is a novel available spectrum discovery scheme by exploiting the advantages of a sensing signaling. The proposed method achieves considerable improvement in throughput and delay time. The proposed method can use more subcarriers for transmission by applying NC-OFDM in contrast with the conventional IEEE 802.11af standard. Moreover, the increased number of wireless microphones (WMs) hardly affects the throughput of the proposed method because our proposal only excludes some subcarriers used by WMs. Additionally, the proposed method can cut discovery time down to under 10 ms because it can find available channels in real time by exchanging sensing signal without interference to the WM.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.312-324
• /
• 2008

In this study, the functional property as a super abrasive material was secured for CBN powder by the electroless Ni-P plating on the surface of the particle. The plating solution has been prepared to control the surface morphology by regulating surfactants and process conditions. The effects of processing parameters on the surface morphology of CBN powder was discussed. The results are summarized as follows; A stable plating tendency was achieved from 1 hour after quantitatively dropping reducing agent. It was observed that more than 50% of the weight gain was obtained by Ni-P coating on the surface of CBN super abrasive powder. The morphology of the Ni-P coating layer is consisted of botryoidal and spiky type and it could be controlled by regulating processing parameters. Superior characteristic in terms of surface morphology was found in the nonionic surfactant XL-80N. It was found that XL-80N considerably decreased surface tension of CBN powder and Ni-P alloy surface then enhance wettability as well as plating rate. Metal coated CBN powder as a raw material of resin bond wheel has been developed through this investigation.

• 동력기계공학회지
• /
• 제21권4호
• /
• pp.77-83
• /
• 2017

The aim of this paper is to solve the chattering and delayed response problems caused by gear backlash. In the gear mechanism based systems, for example, in robot systems, the actuators provide the reduction gear with motors to transfer effectively electric power to mechanical power. Therefore, the gear backlash exists and is an unavoidable fact which makes many undesirable problems. In this paper, the authors try to make a solution for this issue and, introduce several control methods which are PID only, PID with Smith predictor and super-twisting algorithm based SMC(sliding mode control). Each control method is applied to the real plant in which strong backlash is included. By comparison results, it is clear that SMC gives the best control performance with little backlash effects. Also, the usefulness and effectiveness of proposed control method is verified by experiment.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.134-137
• /
• 2019

A wide-bandwidth current controller is required for fast charging/discharging of super capacitor applications. Peak current mode is generally used to accomplish fast charging/discharging because this mode has fast response characteristics. However, the peak current mode control must have a slope compensation function to restrain sub-harmonics oscillation. The slope must be changed accordingly if the controlled output voltage is varied. However, changing the slope for every changed output voltage is not easy. The other solution, selecting the slope as the maximum value, causes a slow response problem to occur. Therefore, we propose a hybrid mode controller that uses a peak current and a newly specified valley current. Through the proposed hybrid mode control, the sub-harmonic oscillation does not occur when the duty is larger than 0.5 because of the fast response.

• 한국전산유체공학회지
• /
• 제17권2호
• /
• pp.35-41
• /
• 2012

This paper presents incompressible Navier-Stokes solution algorithm for 2D Free-surface flow problems on the Cartesian mesh, which was implemented to run on Graphics Processing Units(GPU). The INS solver utilizes the variable arrangement on the Cartesian mesh, Finite Volume discretization along Constrained Interpolation Profile-Conservative Semi-Lagrangian(CIP-CSL). Solution procedure of incompressible Navier-Stokes equations for free-surface flow takes considerable amount of computation time and memory space even in modern multi-core computing architecture based on Central Processing Units(CPUs). By the recent development of computer architecture technology, Graphics Processing Unit(GPU)'s scientific computing performance outperforms that of CPU's. This paper focus on the utilization of GPU's high performance computing capability, and presents an efficient solution algorithm for free surface flow simulation. The performance of the GPU implementations with double precision accuracy is compared to that of the CPU code using an representative free-surface flow problem, namely. dam-break problem.

• 대한수학회논문집
• /
• 제27권3호
• /
• pp.557-564
• /
• 2012

This study concerns the existence of positive solution for the following nonlinear system $$\{-div(|x|^{-ap}|{\nabla}u|^{p-2}{\nabla}u)=|x|^{-(a+1)p+c_1}({\alpha}_1f(v)+{\beta}_1h(u)),x{\in}{\Omega},\\-div(|x|^{-bq}|{\nabla}v|q^{-2}{\nabla}v)=|x|^{-(b+1)q+c_2}({\alpha}_2g(u)+{\beta}_2k(v)),x{\in}{\Omega},\\u=v=0,x{\in}{\partial}{\Omega}$$, where ${\Omega}$ is a bounded smooth domain of $\mathbb{R}^N$ with $0{\in}{\Omega}$, 1 < $p,q$ < N, $0{{\leq}}a<\frac{N-p}{p}$, $0{{\leq}}b<\frac{N-q}{q}$ and $c_1$, $c_2$, ${\alpha}_1$, ${\alpha}_2$, ${\beta}_1$, ${\beta}_2$ are positive parameters. Here $f,g,h,k$ : $[0,{\infty}){\rightarrow}[0,{\infty})$ are nondecresing continuous functions and $$\lim_{s{\rightarrow}{\infty}}\frac{f(Ag(s)^{\frac{1}{q-1}})}{s^{p-1}}=0$$ for every A > 0. We discuss the existence of positive solution when $f,g,h$ and $k$ satisfy certain additional conditions. We use the method of sub-super solutions to establish our results.

• Structural Engineering and Mechanics
• /
• 제14권1호
• /
• pp.99-118
• /
• 2002

The scaled-boundary finite element method is a novel semi-analytical technique, combining the advantages of the finite element and the boundary element methods with unique properties of its own. The method works by weakening the governing differential equations in one coordinate direction through the introduction of shape functions, then solving the weakened equations analytically in the other (radial) coordinate direction. These coordinate directions are defined by the geometry of the domain and a scaling centre. This paper presents a general development of the scaled boundary finite-element method for two-dimensional problems where two boundaries of the solution domain are similar. Unlike three-dimensional and axisymmetric problems of the same type, the use of logarithmic solutions of the weakened differential equations is found to be necessary. The accuracy and efficiency of the procedure is demonstrated through two examples. The first of these examples uses the standard finite element method to provide a comparable solution, while the second combines both solution techniques in a single analysis. One significant application of the new technique is the generation of transition super-elements requiring few degrees of freedom that can connect two regions of vastly different levels of discretisation.

• 한국결정성장학회지
• /
• 제20권5호
• /
• pp.227-231
• /
• 2010

광촉매 특성을 지닌 초친수 $TiO_2$ 박막을 액상증착법에 의해 유리 기판 위에 성공적으로 제조하였다. 제조된 $TiO_2$ 박막은 $70^{\circ}C$에서 박막표면에 $TiO_2$ 나노 입자들을 형성하였다. $TiF_4$ 용액의 침적시간이 증가됨에 따라 박막의 두께도 일정하게 증가되었다. $TiO_2$ 박막은 약 $5^{\circ}$ 이하의 접촉각과 가시영역에서 약 75~90 %의 투과율을 보여주었다. 또한 제조된 $TiO_2$ 박막은 자외선 조사에 의해 메칠오렌지 용액을 분해하는 광촉매 특성을 보여주었다. 침적시간 조건에 따라 제조된 박막의 표면 구조, 광학적 특성, 접촉각을 FE-SEM, AFM, UV-Vis, contact angle meter를 이용하여 측정하였다.