• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.263-274
• /
• 2018

본 연구에서는 순수형 보강토교대의 상부구조로 적용되는 슬래브교에 대한 적용성을 검토하고 보강토 교대의 외적/내적 안정성에 대해 검토하였다. 상부구조인 슬래브교의 연장은 10.0 m ~ 20.0 m, 두께는 0.7 m ~ 0.9 m를 대상으로 하여 구조해석을 수행하여 보강토교대의 교량받침에 작용되는 사하중과 활하중에 의한 반력을 산정하였다. 슬래브교는 연장 20.0m까지 순수형 보강토교대의 허용 접지압 200 kPa을 만족하였다. 순수형 보강토교대의 외적 안정성은 보강토체의 기하형상에 지배되기 때문에 상부구조의 하중에 의한 안전율 변화는 작은 것으로 나타났다. 지지력에 대한 안전율은 기초지반의 강성은 상수이지만 활동력인 상부구조의 하중은 증가되므로 감소되었다. 그리고 상부구조로 인해 보강토옹벽 상단에 작용하는 접지압이 200 kPa을 초과할 경우, 순수형 보강토교대에서는 전면벽체에 작용하는 수평토압이 과도하게 증가되어, 최상단 보강재에서 내적안정성인 인발과 파단에서 허용안전율을 만족하지 못하였다. 순수형 보강토교대의 효율적 설계 및 성능 확보를 위해서는 보강토체 상단에 배치된 보강재의 인발저항력과 장기허용인장력을 증가시키는 것이 필요한 것으로 분석된다.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.329-335
• /
• 2006

In order to improve thermal efficiency of the fossil fuel power plants, we need to develop advanced materials with superior durability in the ultra-super critical state, which requires surface modifications for superior surface properties. In this study, we coated the Incoloy 901 and 12-17Cr steels for turbine buckets and valves with nitriding, boriding, and $Cr_3C_2-NiCr$ HVOF(high velocity oxygen flow) method. Then the samples were heat treated at $650^{\circ}C$ for 100 hours in vacuum. We analyzed the evolution behaviors of nitrides such as $Fe_3N,\;Fe_4N$, and CrN and borides such as FeB and $Fe_2B$ with XRD and SEM/EDS by comparing hardnesses and compositions of the coated layers before and after the heat treatments.

• Wind and Structures
• /
• 제19권4호
• /
• pp.353-370
• /
• 2014

A new method is proposed in this study for estimating the damping ratio of a super tall building under strong wind loads with short-time measured acceleration signals. This method incorporates two main steps. Firstly, the power spectral density of wind-induced acceleration response is obtained by the wavelet transform, then the dynamic characteristics including the natural frequency and damping ratio for the first vibration mode are estimated by a nonlinear regression analysis on the power spectral density. A numerical simulation illustrated that the damping ratios identified by the wavelet spectrum are superior in precision and stability to those values obtained from Welch's periodogram spectrum. To verify the efficiency of the proposed method, wind-induced acceleration responses of the Guangzhou West Tower (GZWT) measured in the field during Typhoon Usagi, which affected this building on September 22, 2013, were used. The damping ratios identified varied from 0.38% to 0.61% in direction 1 and from 0.22% to 0.59% in direction 2. This information is expected to be of considerable interest and practical use for engineers and researchers involved in the wind-resistant design of super-tall buildings.

• 대한본초학회지
• /
• 제25권4호
• /
• pp.145-149
• /
• 2010

Objectives : Since cosmetics have been one of the help of life, unlike medicine, natural products have been used for cosmetics, generally giving the image of safety and relief compared to synthetic products. Among them, Houttuynia cordata has been known as a useful herbal medicine with antibiotic, anti-inflammatory and anti-oxidative activities. In this study, we were to use Houttuynia cordata extract on formulation of cosmetic emulsions. Methods : The effects of Houttuynia cordata extract on emulsion stability and viscoelastic properties of emulsion were measured using turbiscan and rheometer. And we assessed the anti-oxidative and antibiotic activities of Houttuynia cordata extract. Results : 1. The results of this investigation for emulsion stability showed that the stability emulsion containing Houttuynia cordata extract was decreased depending on concentration of Houttuynia cordata extract. 2. Super oxide dismutase activity was strongly dependents on concentration of Houttuynia cordata extract. 3. Houttuynia cordata extract showed good anti-microbial activity against Staphylococcus aureus. Conclusions : Houttuynia cordata extract can be effectively used in cosmetic emulsions when the relation between natural product extracts and formulation of cosmetics is elucidated.

• 한국초전도ㆍ저온공학회논문지
• /
• 제2권2호
• /
• pp.15-19
• /
• 2000

The stability of variable cross-sectional area HTS current lead is considered. The cross-sectional area is varied to have a constant safety factor which is defined as the ratio of operating current and critical current of superconductor. As the constant area HTS lead, the variable cross-sectional area HTS lead also has three steady states above the bifurcation point and only one steady state below the bifurcation point. The temperature profiles and current sharing ratios for each steady state are calculated. The heat dissipation into cryogenic system for super-conducting, intermediate, and upper states are compared. For Bi-2333 sheathed with silver-gold alloy 2m length of current lead, and the maximum temperature of upper state seems to be burn-out free below 5m length.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.34-39
• /
• 2000

Application of ceramics has grown considerably due to significant improvement in their mechanical properties such as light weight, chemical stability and superior wear resistance. Despite these character, the use of ceramics has not increased because of poor machinability. The method of using of super-abrasives metal bond wheel was proposed. But it is difficult that super-abrasives metal bond wheel can be dressed. Recently, the technology of in-process electrolytic dressing is developed to solve this problem. If this method is applied, loading and glazing are disappeared apparently. The aim of this study is to determine the machining characteristics in terms of lapping wheel speed, machining time, pressurized weight to the workpiece and peak current using in-process electrolytic dressing applied to the CIB-diamond lapping wheel to achieve ultra-precision lapping machining technique.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권3호
• /
• pp.281-292
• /
• 2014

We propose a novel cooperative guidance law design method based on the finite time disturbance observer (FTDO) for multiple near space interceptors (NSIs) with impact time control. Initially, we construct a cooperative guidance model with head pursuit, and employ the FTDO to estimate the system disturbance caused by target maneuvering. We subsequently separate the cooperative guidance process into two stages, and develop the normal acceleration command based on the super-twisting algorithm (STA) and disturbance estimated value, to ensure the convergence of the relative distance. Then, we also design the acceleration command along the line-of-sight (LOS), based on the nonsingular fast terminal sliding mode (NFTSM) control, to ensure that all the NSIs simultaneously hit the target. Furthermore, we prove the stability of the closed-loop guidance system, based on the Lyapunov theory. Finally, our simulation results of a three-to-one interception scenario show that the proposed cooperative guidance scheme makes all the NSIs hit the target at the same time.

• Wind and Structures
• /
• 제20권4호
• /
• pp.527-548
• /
• 2015

Aeroelastic wind tunnel experiments were conducted for conventional and tapered super-tall building models to investigate the effect of taper on fundamental aeroelastic behaviors in various incident flows. Three incident flows were simulated: a turbulent boundary-layer flow representing urban area; a low-turbulent flow; and a grid-generated flow. Results were summarized focusing on the effect of taper and the effect of incident flows. The suppression of responses by introducing taper was profound in the low-turbulence flow and boundary-layer flow, but in the grid-generated flow, the response becomes larger than that of the square model when the wind is applied normal to the surface. The effects of taper and incident flows were clearly shown on the normalized responses, power spectra, stability diagrams and probability functions.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1082-1089
• /
• 2017

Negative output elementary super lift Luo converter (NOESLLC), which has the significant advantages including high-voltage transfer gain, high efficiency, high power density, and reduced output voltage/inductor current ripples when compared to the traditional DC-DC converters, is an attractive DC-DC converter for the field of negative DC voltage applications. In this study, in consideration of the voltage across the energy transferring capacitor changing abruptly at the beginning of each switching cycle, the improved averaged model of the NOESLLC operating in continuous conduction mode (CCM) is established. The improved DC model and transfer functions of the system are derived and analyzed. The current mode control is applied for this NOESLLC. The results from the theoretical calculations, the PSIM simulations and the circuit experiments show that the improved DC model and transfer functions here are more effective than the existed ones of the NOESLLC to describe its real dynamical behaviors.

• 한국지구과학회지
• /
• 제37권2호
• /
• pp.107-116
• /
• 2016

전구영역 수치모델을 이용하여 순압 로스비-하우어비츠 파동의 안정성을 조사하였다. 본 연구에서 조사한 로스비-하우어비츠 파동은 강체 회전하는 동서 기본류와 유한한 진폭을 가지는 구면조화 파동으로 구성된다. 로스비-하우어비츠 파동은 강체 회전하는 동서 평균류의 강도에 따라 정상 또는 비정상의 구조로 나타난다. 수치 실험을 통해 임의의 다른 두 시간에서 섭동장의 진폭을 비교하여 파동의 안정성뿐만 아니라 성장률을 결정하였다. 로스비-하우어비츠 파동의 불안정 모드는 다양한 동서 파수 성분이 결합된 형태로 나타났다. 파동의 속도가 느린 지역에서 와도 섭동장은 불연속적인 형태를 보이는데, 이는 모델의 수평 해상도와 관계가 없는 것으로 밝혀졌다. 푸리에-유한 요소 모델에서 더 이른 적분 시간에 불안정 모드가 나타났는데, 이는 구면조화 스펙트럴 모델 대비 더 낮은 수치 정확도를 가지기 때문인 것으로 보인다. 모델의 전체적인 정확도를 고려하여, 불안정 모드가 구면 조화 파동을 전체적으로 지배하기 시작하는 시간을 추정하였다.