• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.818-823
• /
• 2002

Effects of pelleting, drying, conditioning, and additives on the characteristics of Yukwa (fried pellet) were determined. RVA maximum paste viscosity of Bandegi (waxy rice pellet) was the highest after 2 days of moisture conditioning process, and decreased 2 days later. Air bubbles in Bandegi were distributed uniformly but were not significantly affected by conditioning time. For higher expansion and softer texture of Yukwa, the optimum moisture content of dried and conditioned Bandegi was $14{\sim}17%$. The addition of soymilk and 25% alcohol (Soju) as additives was also effective for achieving higher expansion and soft texture of Yukwa, respectively. Larger air cells were distributed in the center and smaller ones on the edge of Yukwa.

• Journal of Adhesion and Interface
• /
• v.17 no.2
• /
• pp.62-66
• /
• 2016

The curing processes of waterborne adhesives are in general undergone by using hot-air dryer. The hot-air dryer curing the adhesives with heat has a disadvantage of requiring high temperature over $100^{\circ}C$ as well as curing time as long as 20 min. When it comes to the heat control, high temperature open disturbs the adhesion of substrates by extremely lowering the viscosity of the adhesives. Furthermore, the humidity resulting from the drying process makes the curing condition irregularly. In this report, dehumidifying membrane dryer was used in order to keep the curing process same by removing humidity caused by the evaporation of water during the drying process, and to shorten the curing time. Here, we compared the peel strength of attached substrates in the dehumidifying membrane dryer to find out appropriate curing condition and confirm the effects of the dehumidifying membrane.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.2
• /
• pp.75-77
• /
• 2010

Until now, the main treatment for impotence has been the vasodilator injection, penile implants and etc. Among many methods, most effective way is known to be the medical therapy. The oral drug for an impotence remedy has to be above all, effective to the erection, and second, safety when taking in long-term. However, so far the drug in such condition and sufficiency has not been discovered. Consequently, it is crucial to develop the new medicine, made of natural materials only, without any uncertainty of side effect. The silkworm is very difference in physiological chemical change according to growth stage. Therefore the functional effect shows a very big difference according to preparation method with a growth stage. This research carry out the experiment with the pupa powder immediately before the eclosion, eclosion adult, the pupa extract immediately before the eclosion, and the silkworm powder of 5 instar 3rd day. The result showed not a big chance in weight, feed and water intake quantity. But testosterone hormone secretion effects of the freeze drying powder of the pupa immediately before the eclosion was very high 7.31 ng/ml, compared to 2.37 ng/ml of non treatment and 2.67 ng/ml of alcohol extraction method. As this result, the freeze drying pupa powder of the pupa immediately before the eclosion was confirmed to promote the secretion of the testosterone hormone more than alcohol extraction method of existing.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.296-300
• /
• 1991

Seven different cultivars of Korean red pepper, Capsicum annuum L., were collected from different growing areas and analyzed for pungent principles, redness, size and weight. Length of the pod varied in the range of $7.0{\sim}9.4\;cm$ total weight, $1.2{\sim}3.1\;g$, capsaicin content, $11.5{\sim}45.0\;mg%$, dihydrocapsaicin content, $8.5{\sim}35.1mg%$, and redness (absorbance at 460 nm), $6,270{\sim}7,810$ conventional color unit. Contents of capsaicins and redness were significantly different according to the cultivars but the two components were not correlated each other. According to the growing areas, contents of capsaicins and redness were significantly different. Capsaicins content was not significantly different but redness was significantly different between sun-drying and hot air-drying of the pods.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.4
• /
• pp.592-600
• /
• 2021

Probiotics can be processed into a powder, tablet, or capsule form for easy intake. They are exposed to frequent stresses not only during complex processing steps, but also in the human body after intake. For this reason, various coating agents that promote probiotic bacterial stability in the intestinal environment have been developed. Silk fibroin (SF) is a material used in a variety of fields from drug delivery systems to enzyme immobilization and has potential as a coating agent for probiotics. In this study, we investigated this potential by coating probiotic strains with 0.1% or 1% water-soluble calcium (WSC), 1% SF, and 10% trehalose. Under simulated gastrointestinal conditions, cell viability, cell surface hydrophobicity, and cell adhesion to intestinal epithelial cells were then measured. The survival ratio after freeze-drying was highest upon addition of 0.1% WSC. The probiotic bacteria coated with SF showed improved survival by more than 10.0% under simulated gastric conditions and 4.8% under simulated intestinal conditions. Moreover, the cell adhesion to intestinal epithelial cells was elevated by 1.0-36.0%. Our results indicate that SF has positive effects on enhancing the survival and adhesion capacity of bacterial strains under environmental stresses, thus demonstrating its potential as a suitable coating agent to stabilize probiotics throughout processing, packaging, storage and consumption.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.372-376
• /
• 1992

This experiment was conducted to determine hay making time on the drying period, hay moisture content, hay loss content, yield and forage quality of Italian ryegrass in paddy field. Plant height increased rapidly from middle of April, and leaf weight rate were 55.6% at April 20 and 18.9% at May 30. Moisture content and loss content of hay were 17.1-20.5% and 10.2-15.0%, respectively, at drying for 4 days from May 10 to May 30. As the growth stage later, crude protein, fat and ash contents reduced, but crude fiber and NFE contents increased. Dry matter and TDN yield at the cutting of May 20 and May 30 increased to 17-18% and 5-11%, respectively, than those of April 20＋May 30.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.1
• /
• pp.64-72
• /
• 2012

Recently, prepackaged-type surface preparation materials using redispersible polymer powders are widely used for interior and exterior finishing in the construction work. The purpose of this study is to evaluate the performance and the quality of prepackaged-type surface preparation materials using a VA/E/MMA terpolymer powder. Surface preparation materials using a VA/E/MMA terpolymer powder were prepared with shrinkage reducing agent contents of 0, 4 % and cellulose fiber contents of 0, 0.5, 1.0 %, and tested for drying shrinkage, strengths, adhesion in tension, crack and impact resistance, water absorption, permeability. As a result, prepackaged-type surface preparation materials show outstanding performance depending on the shrinkage reducing agent and cellulose fiber contents.

• Korean Journal of Pharmacognosy
• /
• v.41 no.1
• /
• pp.62-66
• /
• 2010

In result of analysis for the content determination of ursolic acid(UA) and oleanolic acid(OA) in extract of Eriobotryae folium using HPLC with UV detector, UA in chloroform extract of Moo-mok variety was showed highest content(2.7843 mg/g). And OA in ethyl acetate extract of Dae-bang variety was showed highest content(0.5898 mg/g). These result suggest that direct extraction using organic solvent(chloroform or ethyl acetate) was useful method for rapid quantitative analysis of UA and OA without preprocessing such as drying or fractionation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.305-306
• /
• 2009

This study is on basic experimental methods of easily verifying the fiber content in non-spalling concrete at construction sites. As a result, fiber content in a mixture can be effectively measured by using 15$\ell$ of water for dilution of specimens, dry bit trowel for tool, and microwave for drying.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.651-654
• /
• 2005

Fast-setting cement is usually used for emergency repair construction of roads, bridges, buildings and so on. In this study, we tried to develop fast-setting ultra early strength mortar for prepacked concrete and evaluated the properties of fresh and hardened concrete with it. The flowability of the mortar was high enough to be easily poured into coarse aggregates. It showed high early strength development which can make it possible to use newly constructed structures within $3\~4$ hours regardless of curing conditions such as curing temperature and curing environment. And it also showed good resistance to drying shrinkage and chemical attack.