• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.511-517
• /
• 2010

Dissolution procedure of vanadium pentoxide, which is widely used as a catalyst for production of sulfuric acid or an oxide reaction of the numerous organic compounds, was investigated. Reagent of vanadium pentoxide was completely dissolved in aqua regia-$H_2O_2$-HF solution, but plate type of vanadium pentoxide sample was not clearly dissolved with mixed acids. Thus, in order to establish the dissolution procedure for plate type of vanadium pentoxide, the solubility of vanadium pentoxide was investigated through comparison of acid treatment-fusion and microwave digestion methods. The optimized acid for dissolution of vanadium compound was found to be mixing acids of aqua regia, $H_2O_2$ and HF. Acid-fusion and microwave digestion methods have a similar property in the solubility of vanadium compound, but the latter was more quick and convenient procedure. The content of vanadium pentoxide was found to be $97.9{\pm}0.9%$ using an inductively coupled plasma atomic emission spectrometer after dissolution of a sample with the microwave digestion system.

• Journal of Korean Society of Forest Science
• /
• v.59 no.1
• /
• pp.67-91
• /
• 1983

In order to examine the alcohol production from softwoods (Pinus densiflora Sieb. et Zucc., Pinus rigida Miller, Larix leptolepis Gordon) and hardwoods (Alnus japonica Steud., Castanea crenata Sieb. et Zucc. Populus euramericana CV 214), chemical compositions were analyzed and conditions of acid hydrolysis with wood meals were established. Also strains which could remarkably decompose the cellulose were identified, and conditions of cellulase production of strains, characteristics of cellulase, and alcohol fermentation were examined. The results were summarized as follows. 1) In acid hydrolysis of wood, the high yield of reducing sugars was shown from 1.0% to 2.0% of hydrochloric acid and 2.0% of sulfuric acid. The highest yield was produced 23.4% at wood meals of Alnus japonica treated with 1.0% of hydrochloric acid. 2) The effect of raising the hydrolysis was good at $1.5kg/cm^2$, 30 times (acid/wood meal), and 45 min in treating hydrochloric acid and 30 min in treating sulfuric acid. 3) The pretreatments with concentrated sulfuric acid were more effective concentration ranged from 50% to 60% than that with hydrochloric acid and its concentration ranged from 50% to 60%. 4) The quantative analysis of sugar composition of acid hydrolysates revealed that glucose and arabinose were assayed 137.78mg and 68.24mg with Pinus densiflora, and 102.22mg and 65.89mg with Alnus janonica, respectively. Also xylose and galactose were derived. 5) The two strains of yeast which showed remarkably high alcohol productivity were Saccharomyces cerevisiae JAFM 101 and Sacch. cerevisiae var. ellipsoldeus JAFM 125. 6) The production of alcohol and the growth of yeasts were effective with the neutralization of acid hydrolysates by $CaCO_3$ and NaOH. Production of alcohol was excellent in being fermented between pH 4.5-5.5 at $30^{\circ}C$ and growth of yeasts between pH 5.0-6.0 at $24^{\circ}C$. 7) The production of alcohol was effective with the addition of 0.02% $(NH_2)_2CO$ and $(NH_4)_2SO_4$, 0.1% $KH_2PO_4$, 0.05% $MgSO_4$, 0.025% $CaCl_2$, 0.02% $MnCl_2$. Growth of yeasts was effective with 0.04-0.06% $(NH_2)_2CO$ and $(NH_4)_2SO_4$, 0.2% $K_2HPO_4$ and $K_3PO_4$, 0.05% $MgSO_4$, 0.025% $CaCl_2$, and 0.002% NaCl. 8) Among various vitamins, the production of alcohol was effective with the addition to pyridoxine and riboflavin, and the growth of yeasts with the addition to thiamin, Ca-pantothenate, and biotin. The production of aocohol was increased in 0.1% concentration of tannin and furfural, but mas decreased in above concentration. 9) In 100ml of fermented solution, alcohol and yeast were produced 2.201-2.275ml and 84-114mg for wood meals of Pinus densiflora, and 2.075-2.125ml and 104-128mg for that of Alnus japonica. Residual sugars were 0.55-0.60g and 0.60-0.65g for wood meals of Pinus densiflora and Alnus japonica, respectively, and pH varied from 3.3 to 3.6. 10) A strain of Trichoderma viride JJK. 107 was selected and identified as its having the highest activity of decomposing cellulose. 11) The highest cellulase production was good when CMCase incubated for 5 days at pH 6.0, $30^{\circ}C$ and xylanase at pH 5.0, $35^{\circ}C$. The optimum conditions of cellulase activity were proper in case of CMCase at pH 4.5, $50^{\circ}C$ and xylanase at pH 4.5, $40^{\circ}C$. 12) In fermentation with enzymatic hydrolysates, the peracetic acid treatment for delignification showed the best yields of alcohol and its ratio was effective with the addition of about 10 times. 13) The production of alcohol was excellent when wood meals and Koji of wheat bran was mixed with 10 to 8 and the 10g of wood meals of Pinus densiflora produced 2.01-2.14ml of alcohol and Alnus japonica 2.11-2.20ml.

• Korean Journal of Weed Science
• /
• v.3 no.2
• /
• pp.137-142
• /
• 1983

The effects of various factors on germination of dormant Digitaria sanguinalis seeds were studied to obtain the basic informations on establishing an effective control method in upland crops. Germination of dormant seeds was most significantly promoted by light treatment, about 88-89%, and followed by the treatment of alternating temperatures (15 or 20$^{\circ}C$ to 35$^{\circ}C$), showing the similar effects like light. Removal of seed coats also increased germination of dormant seeds by 72%, next to the treatments of light and altering temperature. Potassium nitrate ($KNO_3$) at $10^{-2}M$ and concentrated sulfuric acid ($H_2SO_4$) treatment at the duration of 8 minutes resulted in 20% and 37.8% of germination of dormant seeds, respectively, which were significantly higher than that of the untreated control. Under the conditions of altering temperature, gibberellic acid (GA) at $10^{-3}M$ to $10^{-6}M$, benzylandenin (BA) at $10^{-4}$ to $10^{-7}M$ and their combination had no effect on breaking of dormant weed seeds, and instead inhibited the promotive effects induced by the alternating temperature. However, under the constant temperature at 35$^{\circ}C$ in dark, all these treatments increased germination as much as 20% over the untreated control.

• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.259-268
• /
• 1988

For the purpose of examining the effects of simulated acid rain on nutrient contents of plant tissues in Pintos densiflora seedlings and Forsythia koreana rooted cuttings, the experimental design of randomized block arrangement with three replications was implemented in the experimental field of Yesan National Agricultural Junior College. One-year-old Pinus densiflora seedlings and Forsythia koreana cuttings were planted in the pots filled the mixed soils(nursery soil : forest soil of siliceous sandy loam=1 : 1 v/v) in the early spring of 1986. The regime of artificial acid rain, in terms of spray frequency per month and spray amount at single treatment per plot, was simulated on the basis of climatological data averaged from 30 years records. Simulated acid rain(pH 2.0, pH 4.0, and pH 5.5 as control) containing sulfuric and nutric acid in the ratio of 3 : 2(chemical equivalant basis) diluted with ground water were treated on the experimental plants under condition of cutting off the natural precipitation with vinyl tunnel, during the growing season(May 1 to August 31) in 1986. The results obtained in this study were as follow : (1) As for the nitrogen contents in plant tissues, P. densiflora increased significantly in one-year-old stembranch and root tissues, and F. koreana increased significantly in leaf and root tissues, as the pH levels of acid rain decreased. (2) The available phosphate contents in root tissues of P. densiflora, and in leaf and root tissues of F. koreana were significantly decreased, as the pH levels of acid rain decreased. (3) $K_2O$, CaO and MgO contents in plant tissues were significantly decreased in the both species as the pH levels decreased. And the effects of acid rain on F. koreana were higher than those of P. densiflora. (4) Sulfur contents of plant tissues in the both species were increased at pH 2.0 treatment. There were significant differences among three acid rain treatments in leaf and root tissues of P. densiflora, and in all parts of F. koreana. (5) In the effects of simulated acid rain on the both species and the tested soils, in general, F. koreana revealed higher sensitiveness than P. densiflora, and the lower pH levels of simulated acid rain were treated, the more sharp reaction was showed.

• Journal of Korean Society of Forest Science
• /
• v.77 no.4
• /
• pp.453-459
• /
• 1988

The purposes of this study were to evaluate the effects of acid rain on tree growth and on the mycorrhizal formation and the effects of mycorrhizae on the host tolerance to acid rain. Simulated acid rain was applied for five months to Pinus $rigida{\times}taeda$ seedlings in pots inoculated with Pisolithus tinctorius (Pt) and Suillus luteus (Sl). Mycelial inocula of Pt and Sl were either mixed with entire pot soil (Mix) or casted as a band (Band) after soil sterilization. Three pH levels of acid rain (pH 3.0, 4.5 and 6.4 adjusted by 3 : 1 mixture of sulfuric and nitric acids) were tested. Pt-Mix was most effective in growth stimulation and resulted in 45-90% increase in tree height in sandy loam. Pt-Band was less effective than Pt-Mix in growth stimulation and mycorrhizal formation. Simulated acid rain at pH 4.5 stimulated height growth by 10-55%, while acid rain at pH 3.0 did not significantly affect the height growth. The top/root ratio was increased by pH 4.5 treatment, while pH 3.0 treatment reduced it. Mycorrhizal infection rate was not affected by acid rain. Pt inoculation reduced acid-induced leaf injury by 28-58% in both pH 3.0 and 4.5 compared with un-inoculated plants. Sl was also effective in growth enhancement, but was less effective than Pt in both mycorrhizal infection and reducing leaf injury.

• Journal of Life Science
• /
• v.27 no.12
• /
• pp.1430-1436
• /
• 2017

This study assessed the effects of treatment with sap extract from onion residues postharvest and purslane on the quality and quantity of organic onions. At the bending stage, onions treated with the sap extract showed vigorous growth, with higher plant heights, more leaves, and longer sheath lengths than untreated onions. The onion yield was significantly increased when the plant was treated with extracted sap as compared with that of untreated plants (p<0.05). The bulb weight distribution of onions in the mixed onion and purslane treatment was also significantly increased (~300 g) as compared with that of the other treatment (p<0.05). Except for CaO and S, the mineral content of the onions produced from plants treated with the onion and purslane extract mixture was higher than those of onions in the other treatment. The hardness of onions produced from plants treated with the onion and purslane extract was significantly increased (8% and 20%, respectively) as compared with that of onions produced from plants treated with the onion extract only or no treatment (p<0.05). However, there was no significant difference in the sugar contents of the onions produced from extract-treated and nonextract-treated plants. Postharvest, the content of inorganic components (phosphate, calcium, sulfuric acid, and manganese) was higher in soil treated with the onion extract than in soil treated with the onion and purslane extract and non-treated soil. It can be concluded that residues left after onion harvests and purslane extract can be used as natural and environmentally friendly materials for the cultivation of organic onions.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.230-240
• /
• 1987

Half-sib seedlings of Ginkgo biloba (one-year-old) were treated with various simulated acid rains(pH2.0, pH3.0, pH4.0 and pH5.0) to examine the effects of acid rain on leaf surface area, leaf injury, leaf chlorophyll content and photosynthetic ability of the leaf tissue. The seedlings were grown in a pot($4500cm^3$) containing one of three different soils(nurseryy soil, mixed soil and sandy soil). Simulated acid rain was made by diluting sulfuric and nitric acid solution($H_2SO_4:HNO_3=3:1$, V/V) with tap water and tap water(pH6.4), and treated by 5mm each time for three minutes during the growing seasons(April to October 1985). Acid rain treatments were done three times per week to potted seedlings by spraying the solutions. The results obtained in this study were as follows : 1. Leaf surface area per seedling at pH2.0 level was the lowest among the levels of pH, but those at other pH levels were not significantly different. 2. Leaf injury(injured leaf rate and injured leaf area) increased with decreasing pH levels of acid rain. 3. Leaf chlorophyll content measured during the period June through October was significantly different among the soil types, and that of the seedling in nursery soil was the highest. The lower pH levels of simulated acid rain was treated ; more leaf chlorophyll content was measured at the beginning of treatment, and the more it severely decreased at the late growing period. 4. Photosyntetic abilities, and the highest value was shown in nursery soil. Significand difference in photosynthetic ability among the levels of pH was observed only in August. Photosynthetic ability increased with decreasing pH levels at the beginning of treatment, but decreased rapidly after July.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.885-892
• /
• 2018

Molybdenum disulfide ($MoS_2$) based electrocatalysts have been proposed as substitutes for platinum group metal (PGM) based electrocatalyst to hydrogen evolution reaction (HER) in water electrolysis. Here, we studied $MoS_2/CNFs$ hybrid catalyst prepared by electrospinning method with heat treatment for polymer electrolyte membrane(PEM) water electrolysis to improve the HER activity. The physicochemical and electrochemical properties such as average diameter, crystalline properties, electrocatalitic activity for HER of synthesized $MoS_2/CNFs$ were investigated by the Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy (TEM), Raman Spectroscopy (Raman) and Linear Sweep Voltammetry (LSV). The as spun ATTM/PVP nanofibers were prepared by sol-gel and electrospinning method. Subsequently, the $MoS_2/CNFs$ was dereived from reduction heat treatment of ATTM at the ATTM/PVP nanofibers and carbonization heat treatment. Synthesized $MoS_2/CNFs$ electrocatalyst had an average diameter of $179{\pm}30nm$. We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ electrocatalyst consist of 3~4 layers from the Raman results. In addition, We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ catalyst consist of 7.47% octahedral 1T phase $MoS_2$, 63.77% trigonal prismatic 2H phase $MoS_2$ with 28.75% $MoO_3$ through the XRD, Raman and XPS results. It was shown that $MoS_2/CNFs$ had the overpotential of 0.278 V at $10mA/cm^2$ and tafel slope of 74.8 mV/dec in 0.5 M sulfuric acid ($H_2SO_4$) electrolyte.

• Journal of the Korean Chemical Society
• /
• v.37 no.2
• /
• pp.249-254
• /
• 1993

N-p-nitrophenyl poly(m-phenylene isophthalamide) was obtained from treatment of poly(m-phenylene isophthalamide) with sodium hydride in dimethyl sulfoxide followed by the addition of 1-fluoro-4-nitrobenzene in 43 wt% yield. Its inherent viscosity was 0.606 g/cm${\cdot}$sec determined from a solution of 0.125 g of the above polymer dissolved in 25 ml of 98% sulfuric acid at $30^{\circ}C.$ In order to synthesize poly(m-phenylene isophthalamide), 1,3-phenylenediamine is allowed to react with isophthaloyl chloride in chloroform in the presence of triethylamine and added triethylamine hydrochloride. The value of inherent viscosity is 0.560 g/cm${\cdot}$sec measured at the same condition. The substitution ratio of N-p-nitrophenyl poly(m-phenylene isophthalamide) was to be 16.7∼47.0% by using the $^1H-NMR$ integration. When the higher inherent viscosity of poly(m-phenylene isophthalamide) was used, lower substitution ratio would be calculated.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.357-361
• /
• 2001

The possibility of producing Cr$_2$O$_3$powder from waste magnesia-chromium refractory was investigated by sulfuric acid reaction, alkali fusion, water leaching & purification and heat treatment. The effects of temperature, the amount of NaOH added and the flow rate of air on chromium extraction efficiency in an alkali fusion step were investigated. The fusion product was leached with methanol to solve free-NaOH, and then leached with water to produce a Na$_2$CrO$_4$solution. The purity of chrome(Ⅵ) oxides, prepared both from monochromate with an impurity content and monochromate purified with $CO_2$were also examined. The purified monochromate solution was reduced from Cr(Ⅵ) to Cr(III) with NaHSO$_3$solution. The reduced solution was neutralized with NaOH to produce Cr(OH)$_3$. Water washing was treated to eliminate Na$_2$SO$_4$from neutralized Cr(OH)$_3$slurry. The washed Cr(OH)$_3$was dried and thermally treated to produce Cr$_2$O$_3$powder. The properties like lightness and hue of Cr$_2$O$_3$fabricated in this study were L=47.47, a=-14.40 and b=17.21.