• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.1
• /
• pp.31-42
• /
• 2000

The dry deposition velocities and fluxes of air pollutants such as SO2(g), O3(g), HNO3(g), sub-micron particulates, NO3(s), and SO42-(s) were estimated according to local meteorological elements in the atmospheric boundary layer. The model used for these calculations was the multiple layer resistance model developed by Hicks et al.1). The meteorological data were recorded on an hourly basis from July, 1990 to June, 1991 at the Austin Cary forest site, near Gainesville FL. Weekly integrated samples of ambient dry deposition species were collected at the site using triple-fiter packs. For the study period, the annual average dry deposition velocities at this site were estimated as 0.87$\pm$0.07 cm/s for SO2(g), 0.65$\pm$0.11 cm/s for O3(g), 1.20$\pm$0.14cm/s for HNO3(g), 0.0045$\pm$0.0006 cm/s for sub-micron particulates, and 0.089$\pm$0.014 cm/s for NO3-(s) and SO42-(s). The trends observed in the daily mean deposition velocities were largely seasonal, indicated by larger deposition velocities for the summer season and smaller deposition velocities for the winter season. The monthly and weekly averaged values for the deposition velocities did not show large differences over the year yet did show a tendency of increased deposition velocities in the summer and decreased values in the winter. The annual mean concentrations of the air pollutants obtained by the triple filter pack every 7 days were 3.63$\pm$1.92 $\mu\textrm{g}$/m3 for SO42-, 2.00$\pm$1.22 $\mu\textrm{g}$/m-3 for SO2, 1.30$\pm$0.59 $\mu\textrm{g}$/m-3 for HNO3, and 0.704$\pm$0.419 $\mu\textrm{g}$/m3 for NO3-, respectively. The air pollutant with the largest deposition flux was SO2 followed by HNO3, SO42-(S), and NO3-(S) in order of their magnitude. The sulfur dioxide and NO3- deposition fluxes were higher in the winter than in the summer, and the nitric acid and sulfate deposition fluxes were high during the spring and summer.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.2
• /
• pp.37-43
• /
• 2009

With the economic development of Korea, sewage treatment facilities and waste food treatment facilities have been steadily increased. These facilities have positive effects such as the conservation of the water resources quality and waste food recycling while they also affect the neighborhood life with severe odor problems. Therefore, it was first collected sludge samples from 5 sewage treatment facilities and 5 waste food treatment facilities where the amounts of waste produced from above sites are relatively immense in Busan and estimate the $H_2S$ emission rates. Then it was selected 1 sample which has the highest emission rate of $H_2S$. Using flux chamber and GC/FPD analyses, it was tried to quantify the emitted amount of sulfonic gas concentration under anoxic condition. The sludge sample obtained from Noksan sewage treatment facility has the highest emission rate of $H_2S$. This sample contained 156.18 mg/kg $H_2S$. The odor compounds were analyzed using GC/FPD and the concentrations were converted to odor quotient. Among odor compounds the ratio of $CH_3SH$ (methylmercaptan) for the total odor quotient was 47.3% and considered to be the main odor compound in the sample.

• The Korean Journal of Ecology
• /
• v.25 no.2
• /
• pp.119-125
• /
• 2002

In order to elucidate the budget and cycling of Nitrogen and Sulfur, esential elements and principal constituents of acid rain, their input through precipitation, and their output by streamflow were quantified in coniferous and deciduous forested watersheds, using combination of nutrient concentration and hydrological analysis, in Kwangnung Experimental Forest from July 1991 to Decmeber 1993. Amount of annual mean precipitation was 12.916 ton·ha/sup -1/·yr/sup -1/, annual mean runoff 5,094 ton·ha/sup -1/·yr/sup -1/(39%), 7,647 ton·ha/sup -1/·yr/sup -1/(59%) in coniferous and deciduous forest watersheds, respectively. Amounts of annual input of N(NO₃/sup -/+NH₄/sup +/) and SO/sup 2-/₄ through preciptation were 12.5, 81.7 kg·ha/sup -1/·yr/sup -1/, respectively. Annual output via runoff of N(NO₃/sup -/+NH₄/sup +/) and SO/sup 2-/₄were 0.06, 39.23 ton·ha/sup -1/·yr/sup -1/ in the coniferous forest watershed ecosystem, and 0.15, 55.46 ton·ha/sup -1/·yr/sup -1/ in the deciduous one, respectively. On the basis of annual nutrient input and output, the annual budget of N(NO₃/sup -/+NH₄/sup +/) and SO/sup 2-/₄were +12.46, +42.49 ton·ha/sup -1/·yr/sup -1/ in the coniferous forest watershed, and +11.35, +26.26 ton·ha/sup -1/·yr/sup -1/ in the deciduous one. Thus N(NO₃/sup -/+NH₄/sup +/) and SO/sup 2-/₄were accumulated in both forested watershed ecosystems.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.158-165
• /
• 2000

The purity of gypsum and quantitation of impurities of flue gas gypsum will not only play an important role in deciding of the optimal condition during a trial run of FGD (flue gas desulfurization), but also can be utilized in quality control of gypsum. The purity of gypsum can be determined from combined water, sulfur trioxide and calcium concentration. We found that the thermal analysis by TGA (thermogravimetric analysis) was the most accurate and convenient method to determine the purity of gypsum. This method will be done in a hour and the results were reproducible. On the other hand, the best way of the analysis of impurities in gypsum was fusion method using $LiBO_2$ as a fusion agent. We also determined the amount of $CO_2$ gas to analyze magnesium carbonate and calcium carbonate contents. The analyses of combined water by TGA, fusion method followed by ICP-AES (inductively coupled plasmaatomic emission spectroscopy) and determination of $CO_2$ amount can lead to more accurate and convenient method for gypsum analysis.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.535-544
• /
• 2013

Influence of sulfate on the early hydration in the solidification treatment of abandoned mine tailings was characterized. Solidified specimens using hydrated lime as a binder were prepared with various amounts of added $Na_2SO_4$ and different curing days. Unconfined compressive strength measurement, heavy metal leaching test, XRD analysis were performed after 7-, 14- and 28-days curing. According to curing days strength of solidified specimens using only distilled water increased but those with addition of $Na_2SO_4$ decreased. External cracks of specimens developed definitely with increasing $Na_2SO_4$ concentration and curing days. Concentrations of Cu, Cd, Zn, and As in the leached solutions from solidified specimens decreased significantly but Pb was leached readily in cases of hydrated lime dosage more than 10 wt%. Gypsum and $MgSO_4$ were identified in the cracked solidified specimens by XRD analysis, and pillar-shaped crystals of SEM image were identified as gypsum in reference with EDS analysis. Crystallization of sulfate in the process of lime-tailing solidification caused cracking, which should be supplemented for solidification treatment of highly sulfur-contained tailing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.140-146
• /
• 2017

It is laser induced breakdown spectroscopy(LIBS) that enables qualitative and quantitative analysis of the elements contained in unknown specimen by comparing the wavelength characteristics of each element obtained from the spectral analysis of the standard specimen with the wavelength analysis results from unknown specimens. In this study, the applicability of LIBS to the analysis of major deterioration factors affecting concrete durability was experimentally analyzed. That is, the possibility of applying LIBS to the diagnosis of concrete deterioration by studying the quantitative detection of harmful deteriorating factors on chloride, sulfate and carbonated mortar specimens using LIBS was studied. As a result of LIBS test for each chloride and sulfate specimen, the LIBS spectral wavelength intensity of chlorine and sulfur ions increased linearly with increasing concentration. Carbon ion LIBS spectral wave intensities of carbonated specimens increased nonlinearly over the duration of carbonation exposure. From the above results, it can be partially confirmed that LIBS can be applied to the diagnosis of concrete deterioration. In case of concrete carbonation, it is presumed that carbon content is contained in the cement itself and is different from the detection of chloride and sulfate specimen. Therefore, it is considered that more various parameter studies should be performed to apply LIBS to concrete carbonation.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.819-825
• /
• 1995

Two sweet potato CV.(Ipomoea batatas) were examined, i.e. purple flesh sweet potato(PSP) and light yellow flesh sweet potato(LYSP) which varied in degree of sweetness. On a fresh weight basis, nitrogen free extract in cultivars ranged from $25.73{\sim}26.24%$ and PSP contained more crude fat than LYSP. Total amino acids of PSP and LYSP were 5676.57mg% and 4550.86mg%, respectively. Aspartic acid, serine, alanine and valine were the major components in sweet potatoes. Sulfur-containing amino acids are the first limiting amino acid in PSP. The major fatty acids in PSP and LYSP analyzed by GC were palmitic acid, linoleic acid. The content of the saturated fatty acid was less than that of the unsaturated fatty acid. Carbohydrate contents were $75.43{\sim}79.10%$ and neutral sugars contents were $67.22{\sim}64.85%$(dry wt). Two sweet potato CV. contained the most glucose of all neutral sugars. PSP contained 11.88% for uronic acid, 59.42% for starch. Free sugars of PSP(0.82%) was much less than that of LYSP(2.53%). The contents of thiamin, riboflavin and niacin were similar, and the ascorbic acid contents in PSP and LYSP were 63.4mg% and 48.7mg%(dry wt), respectively. Comparing the mineral content in PSP, K was the greatest element in concentration followed by mg, Ca, Na. The total dietary fiber(TDF) value was 13.43% in PSP, 9.79% in LYSP respectively. The ratio of soluble dietary fiber(SDF) content and insoluble dietary fiber(IDF) content to TDF content for PSP were 57.6%, 42.4%, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.901-908
• /
• 2009

We examine the processing method of the food wastewater to direct spray at living waste incinerator. The demoscale stoker system is used as a incineration facility. The results show that it brings effect on the reduction of nitrogen oxide ($NO_x$) concentration as well as the ammonia ($NH_3$) amount in SNCR (selective non-catalytic reduction) by the incineration of food wastewater which is containing a plentiful ammoniac nitrogen ($NH_3$-N). Furthermore, the stability of incineration facility and the extension of operation period is actualized as a improvement of clogging phenomenon on outer wall of water pipe as the 870~$950^{\circ}C$ maintain of exit temperature in a second combustor by spray of the food wastewater. The 26 items of air pollution matter of nitrogen oxide ($NO_x$), sulfur oxide ($SO_x$) and dioxin etc. are measured. The results show that it is under the value of allowable exhaust standard.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.335-341
• /
• 1999

To investigate the effect of sulfate deposition un forest tree nutrition, 15 forest stands of Pinus thunbergii were selected throughout Yochon industrial complex, in which is influenced by chronic air pollution. Concentrations of sulfate sulfur, nitrogen, phosphorus, potassium, calcium, and magnesium were analysed fur current and 1-year-old needles of Pinus thunbergii tree. The results obtained were as follows ; 1. Significant higher accumulation of sulfate S, computed with that of unpolluted needles, was observed at all sites, ranging front 0.11% to 0.35% in current needles, and from 0.13% to 0.32% in 1-year-old needles. 2. Ranging from 0.60% to 1.42% in current needles, and from 0.58% to 0.88% 1-year-old needles, respectively, nitrogen concentrations were significantly lower at 7 sites for current needles, and at all sites for 1-year-old needles than at unpolluted site. 3. Phosphorus and potassium levels were significantly lower at very few sites, compared with unpolluted site. 4. Calcium concentrations were significantly lower at 8 sites and 9 sites for current and 1-year old needles than at unpolluted site, ranging from 0.123% to 0.352% and from 0.201% to 0.371% in 1-year old needles, respectively. 5. Ranking from 0.077% to 0.152% in current needles, and from 0.056% to 0.105% in 1-year-old needles, magnesium concentrations were lower at only 2 sites for current needles tut at 12 sites for 1-year-old needles. 6. There were significant declines of concentrations of calcium and magnesium in current needles as sulfate accumulation increased. For 1-year-old needles, there were significant negative correlations-hips between sulfate and nitrogen, potassium, calcium, and magnesium concentration. It is concluded that deposition of sulfuric air pollutant deteriorated nutrients status, resulting in tree decline, in Pinus thunbergii forest in Yochon industrial complex.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.111-120
• /
• 2001

Mechanical properties and their adhesion behavior with zinc- and brass-plated steel cords of natural rubber/acrylonitrile-butadiene blend compounds were investigated as a function of blend ratio. The Mooney viscosity and stress relaxation time were found to be lowered with increasing NBR content. Tensile modulus generally increased with increasing NBR content. Tensile stress at break stayed constant up to about 40 phr and showed minimum at $50{\sim}60 phr$, and thereafter increased with increasing NBR content. Strain at break decreased linearly below 50 phr, and above the level it showed nearly constant value. Based on the abrupt drops in elastic modulus and tan ${\delta}$ peak, the glass transition temperature of NR and NBR were found to be -55 and $-10^{\circ}C$, respectively. In the case of NR/NBR blend compounds, two distinct transition points were observed and each transition position was not affected by NBR level indicating an incompatible nature of NR/NBR blend system. The pullout force and rubber coverage decreased to the level of about 40% to that of pure m compound, when the 50 phr of NR was replaced by NBR. However, the pure NBR compound showed the comparable adhesion performance with NR(${\sim}90%$). The sulfur concentration was found to become lower with the increased NBR content at the adhesion interface based on the Auger spectrometer results, representing a lack of adhesion layer formation, and this was explained for a possible cause of low adhesion performance with adding NBR.