• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.395-401
• /
• 2004

In this study, lots of methods have been studing to utilize energy and decrease contaminated effluents. There has been great progress on IGCC (Integrated gasification combined cycle) to reduce thermal energy losses. The following results have been conducted from desulfurization experiments using waste shell to remove $H_{2}S$. Unreacted core model ior desulfuriration rate prediction of sorbent was indicated. These were linear relationship between time and conversion. So co-current diffusion resistance was conducted reaction rate controlling step. The sulfidation rate is likely to be controlled primarily by countercurrent diffusion through the product layer of calcium sulfide(CaS) formed. Maximum desulfurization capacity was observed at 0.631 mm for lime, oyster and hard-shelled mussel. The kinetics of the sorption of $H_{2}S$ by CaO is sensitive to the reaction temperature and particle size at $800^{\circ}C$, and the reaction rate of oyster was faster than the calcined limestone at $700^{\circ}C$.

• 한국표면공학회지
• /
• 제30권4호
• /
• pp.248-254
• /
• 1997

The sulfidation behavior of a sputter-deposited amorphous coating of 69.0%Nb-16.9Ni-11.9%Al-2.2%Si (at.%) has been investigated as a funtion of temperature.(973-1173K) in pure sulfur pressure of 0.01atm. The sulfidation kinetics of the casting obyed the parabolic rate low over the whole temperature ranges studied. The stlfidation rate increased with the temperature, as expected. The sulfide scale, the composition of which was $Al_2S_3,\;NbS_2,\;Ni_{3-x}S_2\;and\;FeCrS_4$, formed on the amorphous coating was primarily bilayered. Both the outer fastgrowing non-protective 4Al_2S_3$scale and the inner slowly-growing protective $NbS_2$,/TEX> scale and the inner slowly-growing protective $NbS_2$ scale had some Fe and Cr dissolution, which evidently came from the base substrate alloy of stainless steel type 304. Belows the coating, Kirkendall void formation was noticed. Nevertheless, a dramatic improvement of sulfidation resistance was achieved by sputter-depositing Nb-2 Ni-Al-Si layer on the stainless steel 304.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1998년도 봄 학술발표회 프로그램
• /
• pp.144-153
• /
• 1998

Sorbents of calcined limestone and oyster particles having a diameter of about 0.63mm were exposed to simulate fuel gases containing 5000ppmv H2S for temperatures ranging from 600 to 800C in a TGA. The reaction between CaO and H2S proceds via an unreacted shrinking core mechanism. The sulfidation rate is likely to be controlled primarily by countercurrent diffusion through the product layer of calcium sulfide(CaS) formed. The kinetics of the sorption of H2S by CaO is sensitive to the reaction temperature and particle size, and the reaction rate of oyster was faster than the calcined limestone.

• 한국환경과학회지
• /
• 제8권1호
• /
• pp.125-133
• /
• 1999

Sorbents of calcined limestone and oyster particles having a diameter of about 0.63mm were exposed to simulated fuel gases containing 5000ppm $H_2S$ for temperatures ranging from 600 to 80$0^{\circ}C$ in a TGA (Thermalgravimetric analyzer). The reaction between CaO and $H_2S$ proceeds via an unreacted shrinking core mechanism. The sulfidation rate is likely to be controlled primarily by countercurrent diffusion through the product layer of calcium sulfide(CaS) formed. The kinetics of the sorption of $H_2S$ by CaO is sensitive to the reaction temperature and particle size, and the reaction rate of oyster was faster than the calcined limestone.

• 한국환경보건학회지
• /
• 제14권1호
• /
• pp.11-22
• /
• 1988

Calcium oxide, lithium oxide and titanium oxide were investigated as additives of zinc oxide for the removal of hydrogen sulfide at high temperature. This experiment was performed in the range of 1.0-2.0 vol.% H$_2$S concentration at 623-873 K reaction temperature, using a thermogravimetric analyzer. A pore blocking model was found to fit the reaction rate and the kinetics data were sucessfully expressed by this model. The reactions between additive sorbents and hydrogen sulfide were first order with respect to hydrogen sulfide concentration in a gaseous mixture with nitrogen. Among the used sorbents, ZnO-CaO 0.5 at.% and ZnO-TiO$_2$ 2.0 at.% sorbents had the best additive effects on the sulfidation reaction between additive sorbents and hydrogen sulfide, whereas the ZnO-Li$_2$O sorbents were ineffective.

• 대한환경공학회지
• /
• 제22권11호
• /
• pp.2067-2076
• /
• 2000

모사 고온석탄가스로부터 황화수소를 제거하기 위해 망간계 탈황제(MT, MFT)에 대한 실험을 수행하였다. 망간계 탈황제의 황화수소 제거효율과 탈황제의 물리적 특성을 파악하기 위해 각각 고정층 반응기와 attrition tester를 사용하여 실험하였다. 마멸저항에 대한 실험결과, 벤토나이트를 5% 함유한 탈황제가 2%를 함유한 탈황제보다 마멸저항이 컸으며 또한 경화온도가 높을수록 마멸저항이 큰 것으로 나타났다. 반응온도, 황화수소농도, 그리고 공간속도가 황화수소 제거효율에 미치는 영향을 조사한 결과, MT와 MFT 탈황제 모두 $450^{\circ}C$에서는 황화수소를 5,100ppmv에서 20ppmv까지 제거할 수 있었고, $550{\sim}650^{\circ}C$에서는30~65ppmv까지 제거할 수 있었으며, 공간속도가 증가함에 따라 파과시간은 감소하였다.

• 청정기술
• /
• 제7권3호
• /
• pp.187-194
• /
• 2001

석탄가스화 복합발전(IGCC)의 탈황공정에 사용되는 비아연계 탈황제 중 경제성이 우수한 천연망간광석을 이용하여 황화수소 제거반응에 대한 특성을 연구하였다. $H_2S$와 천연망간광석 탈황제 사이의 반응에 대한 초기 반응 속도를 $400{\sim}800^{\circ}C$의 온도범위에서 열중량 분석기로 실험하였다. 그 결과로 황화수소 제거반응 시 초기 반응은 1차 반응이었고, 반응속도상수는 Arrhenius 식에 잘 적용할 수 있었다. 또한 황화반응이 확산에 의해 제어되는 조건에서 농도 구배가 선형을 나타내었으며, 이를 통하여 유효 확산 계수를 온도에 따른 Arrhenius식으로 나타내었다. 이 결과를 통하여 황화 반응 시 확산에 대한 활성화 에너지와 반응 빈도 인자를 구하였다.