• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.122-123
• /
• 2016

Sulfate anion which cause concrete degradation is affected on marine structures. There are two of control method concrete degradation which is arisen by sulfate anion. Cementitious materials prevent permeation of sulfate anion and water-binder ratio increase to improve watertightness. But, those methods are passive. So, this study is developing new materials which prevent actively concrete degradation on sulfate anion.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.541-547
• /
• 2016

In this experiment we investigated the influence of various anions including oxalic acid encountered as solution phase in soil on the adsorption and desorption of sulfate in Chungwon Bt soil. The effect of chloride and nitrate on the adsorption of sulfate was not significant, suggesting that sulfate was better able to compete for adsorption sites at concentrations studied, in contrast to the large reduction in the amount of chloride adsorbed in the presence of sulfate. The results of competition for sorption sites between sulfate and anion showed that the simultaneous presence of two anions in solution was effective in reduction of competing anion at a maximum value of adsorption, due to the similar adsorption mechanism for anion competition. Therefore, the variation in the buffer power of the acids will produce a change in the strength and amount of adsorption and the competitive ability.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.15-23
• /
• 1997

The anionic exchange resins with the Dowex-1 and Amberlite CG-400 form were transformed into resin of sulfate and acetate acid form, respectively. The uranyl complex ions with SO$_{4}$$^{2-}$ and CH$_{3}$COO$^{-}$ were adsorbed on the anion exchange resion mentioned above, and these complex ions were eluted as mixture eluents of 0.7M HNO$_{3}$ - 0.5M NH$_{4}$NO$_{3}$ by anion exchange chromatography. The optimum adsorption conditions of uranyl anion complex ions adsorbed on the upper of the resin colmun were 1.5-2.0 ml/min of flow rates at pH 2.0 and adsorptive power of uranyl complex ion of sulfuric acid type were nearly consistent with the Caussion normal distribution curve, whereas the elution state of UO$_{2}$(Ac)$_{2}$$^{4-}$ with acetic acid type was departed. The weighing form obtained from resin of sulfuric acid and aceric acid type was U$_{3}$O$_{8}$ whose recovery was 91.7%. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion resin, Amberlite CG-400(sulfate form), was successfully recovered more than 90%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.2
• /
• pp.98-104
• /
• 1994

Precipitation samples were collected at Kosan, Cheju Island over a period of 6 months An automatic rain sampler was manufactured domestically and installed at Kosan station. All samples were collected on a weekly basis. Samples were analyzed for S $O_4$$^{=}$, N $O_3$$^{[-10]}$ , C $l^{[-10]}$ , N $H_4$$^{+}$, N $a^{+}$, $K^{+}$, $Ca^{++}$, $Mg^{++}$, and pH and specific conductivity. The quality analysis of rain sample data were performed based on ion balance and specific conductivity. The pH of rain samples ranged between 4.6 to 6.6. Bicarbonate ion concentration were included in ion balance and specific conductivity calculations. The sum of cation concentrations were slightly greater than the sum of anion concentrations. Calculated specific conductivity was greater than measured specific conductivity. The most probable explanations for this discrepancy is "an anion too low or anion missing." Two criteria were used to identify outliners. They are 1) the difference between the sum of anion concentrations and cation concentration is more than 50 $\mu$eq./1 and 2) the difference between calculated and measured specific conductivity is more than 25%. Chemical analysis from several samples did not satisfy these quality control criteria. Volume weighted average concentrations were calculated. Dominant free acids in rain samples were N $a^{+}$, C $l^{[-10]}$ , S $O_4$$^{=}$, N $O_3$$^{[-10]}$ ions in order of abundance. Non-seasalt sulfate comprises 76% of total sulfate.sulfate.e.ate.e.

• Membrane and Water Treatment
• /
• v.8 no.4
• /
• pp.369-380
• /
• 2017

Performance evaluation of four commercially available tubular membranes (AFC 80, AFC 30, PU 608, ES 404) was accomplished in self-assembled membrane testing unit. Effects of varying transmembrane pressure, feed concentration and anion type were investigated. Aqueous solutions of salts such as calcium chloride, calcium sulfate, tin chloride and tin sulfate were prepared for this study. It was noted that the investigated parameters e.g., pressure and concentration had significant effects on membrane's performance. Nevertheless, anion type effectively played its role in the rejection of salts since salt having SO4-2 anions had a better rejection than the salts containing Cl-1. It is observed that rejection was dominated by Donnon exclusion for strongly charged nanofiltration membranes whereas for weakly charged ultrafiltration membranes, size exclusion was the key mechanism to reject the ions.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.78-82
• /
• 2003

Development of hematite-coated sand was evaluated for the application of the PRB (permeable reactive barrier) in the arsenic-contaminated subsurface of the metal mining areas. The removal efficiency of As(III) and As(V), the effect of anion competition and the capability of arsenic removal in the flow system were investigated through the experiments of adsorption isotherm, arsenic removal kinetics against anion competition and column removal. Hematite-coated sand followed a linear adsorption isotherm with high adsorption capacity at low level concentrations of arsenic (< 1.0 mg/l). When As(III) and As(V) underwent adsorption reactions in the presence of anions (sulfate, nitrate and bicarbonate), sulfate caused strong inhibition of arsenic removal, and bicarbonate and nitrate caused weak inhibition due to specific and nonspecific adsorption onto hematite, respectively. In the column experiments, high content of hematite-coated sand enhance the arsenic removal, but the amount of the arsenic removal decreased due to the higher affinity of As(V) than As(III) and reduced adsorption kinetics in the flow system, Therefore, the amount of hematite-coated sand, the adsorption affinity of arsenic species and removal kinetics determined the removal efficiency of arsenic in the flow system. arsenic, hematite-coated sand, permeable reactive barrier, anion competition, adsorption.

• Journal of Korean Society on Water Environment
• /
• v.25 no.1
• /
• pp.151-158
• /
• 2009

The objective of this study was to determine on optimum ratio of oxidant and catalyst and to evaluate affecting factors such as anions and cations on persulfate oxidation of organic pollutant. Fe(II) activated the persulfate anion to produce a sulfate free radicals and thus effectively used to degrade the target organic pollutant in aqueous system. The chloride ions reacted with sulfate radical produced the $Cl^{\cdot}$ atom and had positive effects on the oxidation of organic pollutant at the initial stage. However, it was observed that chloride ions had the scavenging effects on the rate of oxidation of organic pollutant. Cations and some heavy metals were partly able to activate the persulfate anion to generate a sulfate free radical. However, high levels of cations inhibited the oxidation of organic pollutant.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.68-74
• /
• 2007

The objective of this study is to examine the effect of the coagulation and homogenization in bulking sludge thickening of paper manufacturing plant using DAF(Dissolved Air Flotation) and gravitational sedimentation. The effects of parameters such as dosage of coagulant and homogenization time were examined. The results showed that DAF and sedimentation was affected aluminum sulfate and anion polymer coagulant differently. At the optimum dosage of aluminum sulfate, thickening efficiency of DAF and sedimentation process were increase 1.25 time and 2.02 time, respectively. At the optimum dosage of anion polymer coagulant, thickening efficiency of DAF process was increase 1.35 time, but thickening efficiency at sedimentation was 1.06 time. When anion polymer coagulant of 0.5 mg/l was added in DAF process, water content of sludge was decreased from 96.6% to 90.7% in dewatering process using Buchner funnel test device. After homogenization(20500 rpm, 10 min), Sauter mean diameter of sludge floc was decreased from 631 ${\mu}m$ to 427 ${\mu}m$, however increase of flotation efficiency by DAF was only 1.09 time.

• Journal of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.361-367
• /
• 1983

The selective separation and the quantitative recovery of uranium from Korean monazite sand have been studied by anion-exchange chromatography. It has been shown that method of anion-exchange chromatography under controlled conditions of elution can be applied to the production of relatively high purity of Uranium Oxide from monazite sand. Under the optimum separation conditions, the recoveries from standard sample were up to 99.3% as $U_3O_8$ on sulfate form anion resin bed and 99.2% as $U_2O_3{\cdot}P_2O_7$ on phosphate form anion resin bed. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion exchange resin-Amberlite IRA-900. Uranium was successfully recovered about 92 percent. Phosphate ion did not seem to interfere with the process.

• Journal of the Korean Applied Science and Technology
• /
• v.21 no.3
• /
• pp.238-245
• /
• 2004

The interaction between anion and zwitterionic surfactants was investigated by means of surface tension, NMR spectroscopy, and fluorescence studies. These systems are N-tetradecyloxymethyl-N,N-dimethyl betaine ($C_{14}$, TDB), N-octadecyloxymethyl-N,Ndimethyl betaine ($C_{18}$, ODB), and sodium dodecylethoxy sulfate (SDE). These systems show a composition dependency in micellar properties. When the molar fraction of TDB and ODB was about 0.6, the cmc values of these systems showed minima, whereas the solubilized amount of a water insoluble dye, NMR line width showed maxima. These changes comes from the intramolecular complexes formed in the mixed micelles. The complexes are due to the electrostatic interaction of oppositely charged head groups of betaine and sodium dodecylethoxy sulfate. A comparison of betaine and SDE alkyl methylene group line widths to those of n-methyl group indicates that the interior of the micelle in the restricted region is more immobile than the head group.