• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.3
• /
• pp.97-106
• /
• 2018

This study aimed at examining the suitability of $Tenax^{(R)}$ for the migration testing of food packaging materials, which is currently approved in the EU as a dry food simulant. The results are used as a basis to examine the feasibility of introducing $Tenax^{(R)}$ to Korean regulation. The OMVs of test specimen into various solvents (diethyl ether, ethanol, pentane, and acetone) after exposure to $100^{\circ}C$ for 1 hr were compared. Diethyl ether showed the highest OMV ($1.33mg/dm^2$) among the solvents tested. When the tests were conducted with different amounts of $Tenax^{(R)}$ of 2, 4, or 8 g per specimen, the OMVs were 0.75, 1.33 and $1.40mg/dm^2$, respectively. The OMV obtained with a closed system after wrapping with aluminum foil showed a significantly higher OMV ($1.61mg/dm^2$) than that without aluminum wrapping ($1.318mg/dm^2w$) and an open system without lid ($1.06mg/dm^2$). The specific migration rates of surrogates spiked in the polyethylene test film and paper samples into $Tenax^{(R)}$ were compared with those into liquid food simulants including 95% ethanol and n-heptane, and actual foods such as starch, skim milk, and sugar. In general, the specific migration levels of surrogates into $Tenax^{(R)}$ were similar compared with n-heptane, however those were significantly higher than into actual foods. These results suggest that $Tenax^{(R)}$ may be used as a food simulant for the long-term preservation of dried foods and paper products. However, more studies need to be conducted to investigate the factors influencing the migration into $Tenax^{(R)}$, such as the types of foods and packaging materials tested, migration conditions, and surrogates properties etc.

• Applied Biological Chemistry
• /
• v.27 no.3
• /
• pp.158-162
• /
• 1984

In order to estimate the basic data for the processing suitability of fruits, the contents of free sugars in citrus fruits(14 varieties) cultured in Jeju island, and peaches(4), grapes(4), pears(3) and apples(6) obtained from a local market were investigated by HPLC. The sucrose was the most abundant sugar in citrus fruits and peaches, and followed by fructose and glucose in order. The sugar contents in citru fruits was a wide difference according to the variety. In citrus fruit, the sucrose content was about 53 to 65% to total free sugars and the ratio of fructose to glucose was 1.0/0.8-1.1. The sugars present in grapes and pears were fructose of most abundance, glucose and sucrose in order. Jangshiprang pear showed 2 times higher fructose content than other variety. The free sugar in Taeyang and Hongok(Jonathan) apples were fructose, glucose and sucrose in order of abundance which fructose, sucrose and glucose in Golden Fuji and Mutsu.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.766-771
• /
• 1989

physicochemical properties of rice starch isolated from eight varieties were examined to evaluate the rice processing suitability The amylose contents of rice starch were varied with 16.7-29.7%, and IR 30, Godael, Aguja and Lengkwang varieties showed higher amylose content than the other varieties. The water binding capacity and blue value were in the range of 87.0 103.0 and 0.178-0.305, respectively. As the amylose content increased, the amylogram pasting temperature and the break down ratio increased, while the peak viscosity did not show any significant difference. The transmittance of 0.1% starch suspension slowly increased at $50^{\circ}C$ in the low-amylose content rice group, and rapidly increased at $65^{\circ}C$ in the high-amylose content rice group, but there were no differences above $75^{\circ}C$ among varieties. Also the low-amylose rice starch showed higher values in the swelling power and solubility. The hardness of the 30% rice starch gels was low in low-amylose one. During storage at $20^{\circ}C$ for 14 days, the increment of hardness was more slow in high-amylose one. The retrogradation velocity constant of rice starch gel by Avrami equation was the highest as 0.219 in Aguja variety.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.11
• /
• pp.1479-1484
• /
• 2022

Bacterial cellulose (BC) is gaining attention as a carbon-neutral alternative to plant cellulose, and as a means to prevent deforestation and achieve a carbon-neutral society. However, the high cost of fermentation media for BC production is a barrier to its industrialization. In this study, chestnut shell (CS) hydrolysates were used as a carbon source for the BC-producing bacteria strain, Gluconacetobacter xylinus ATCC 53524. To evaluate the suitability of the CS hydrolysates, major inhibitors in the hydrolysates were analyzed, and BC production was profiled during fermentation. CS hydrolysates (40 g glucose/l) contained 1.9 g/l acetic acid when applied directly to the main medium. As a result, the BC concentration at 96 h using the control group and CS hydrolysates was 12.5 g/l and 16.7 g/l, respectively (1.3-fold improved). In addition, the surface morphology of BC derived from CS hydrolysates revealed more densely packed nanofibrils than the control group. In the microbial BC production using CS, the hydrolysate had no inhibitory effect during fermentation, suggesting it is a suitable feedstock for a sustainable and eco-friendly biorefinery. To the best of our knowledge, this is the first study to valorize CS by utilizing it in BC production.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.65-80
• /
• 1980

Processing conditions of the krill products such as paste food, krill protein concentrate, seasoned dried krill, powdered seasoning, meat ball, and snack have been examined and the quality was evaluated chemically and organoleptically. In the processing of paste food, krill juice was yielded $71\%$ and krill scrap $29\%$. The yields of paste and broth from the krill juice showed $53\%$ and $43\%$, respectively. In amino acid composition of the krill paste, proline, glutamic acid, aspartic acid, lysine, and leucine were abundant, while histidine, methionine, tyrosine, serine and threonine were poor. The optimum condition for solvent extraction in the processing of krill protein concentrate was the 5 times repetitive extraction using isopropyl alcohol at $80^{\circ}C$ for 5 mins. The yield of krill protein concentrate when used fresh frozen materials was $10.2\%$ in isopropyl alcohol solvent and $8.8\% in ethyl alcohol, and when used preboiled frozen materials, the yield was $13.0\%$ in isopropyl alcohol and $11.8\%$ in ethyl alcohol. Amino acid composition of krill protein concentrate showed a resemblance to that of fresh frozen krill meat. In quality comparison of the seasoned dried krill, hot air dried krill was excellent as raw materials and sun dried krill was slightly inferior to hot air dried krill, but preboiled frozen krill showed the poorest quality. The result of quality evaluation for seasoning made by combination of dried powdered krill, parched powdered sesame, salt, powdered beef extract, monosodium glutamate, powdered red pepper and ground pepper showed that the hot air dried krill was good in color and sundried krill was favorable in flavor. When krill meat ball was prepared using wheat flour, monosodium glutamate and salt as side materials, the quality of the products added up to $52\%$ of krill meat was good and the difference in quality upon the results of the organoleptic test for raw materials was not recognizable between fresh frozen and preboiled frozen krill. In the experiment for determining the proper amount of materials such as dried Powdered krill, $\alpha-starch$, sweet potato starch, sugar, salt, monosodium glutamate, glycine, potassium tartarate, ammonium bicarbonate, and sodium bicarbonate in processing krill snack, sample B(containing $7.7\%$ of dried powdered krill) and sampleC (containing $10.8\%$ of dried powdered krill) showed the most palatable taste from the view point of organoleptic test. Sweet potato starch in testing side materials was good in the comparison of suitability for processing krill snack. Corn starch and kudzu starch were slightly inferior to sweet potato starch, while wheat flour was not proper for processing the snack. In the experiment on frying method, oil frying showed better effect than salt frying and the suitable range of frying temperature was $210-215^{\circ}C$.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.15-27
• /
• 2010

As most companies in the world are much interested in the overseas market as well as in the domestic market, many Korean food service enterprises came to focus on extending their branches to the overseas market. However, lack of business strategies including market research, marketing strategies, localization, etc. has made them continue to fail in market entry. The purpose of this study is to develop entry mode of determinants of Korean food service enterprises, considering their characteristic factors and environment factors in the overseas market. To do this, companies which have a head quarter in Korea and over 2 year business experience in the overseas market were chosen and used for a self-administered questionnaire survey. Statistical processing, including descriptive statistics, logistic regressing analysis, and multi regression analysis using an SPSS/PC 12.0 statistical package were conducted The result is as follows. First, explanation suitability was 85% of the entry mode in the overseas market. Second, as business size was smaller, product differentiation was higher, and CEO's will for success in the overseas market was higher, independent entry mode in the overseas market was likely to he chosen. Lastly, as the uncertainty of demand and trade barrier were lower, and a sociocultural gap was smaller, independent entry mode in the overseas market was likely to be chosen.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.1
• /
• pp.8-12
• /
• 1993

Ascidian, Halocynthia roretzi, mainly inhabiting the subtidal rocky bottom as a sessile form, has been favored a tasty sea food in abundance along the east and south coast of Korea. The study was attempted to establish the basic data for evaluating the processing suitability of ascidian. The height, width, total weight, integument weight and edible portion of the ascidian were $9.2{\sim}12.2cm,\;4.7{\sim}6.1cm,\;100.2{\sim}163.0g,\;18.2{\sim}41.4g$ and $20.2{\sim}62.0g$, respectively. The moisture content, which showed a minimum value as low as $80.0\%$ in October. On the contrary, glycogen content of edible portion revealed the maximum value, $3.1{\sim}4.1\%$ from July to August. The protein and fat showed a similar change to glycogen. The level of ash was rather constant throughout the period, being $2.2{\sim}3.8\%$. Among the 7 kinds of mineral analyzed in all the samples of edible portion and integument, Na, K, Mg and Ca contents were predominent in order being more than $96.14{\sim}99.10\%$, of the total ash. In the amino acid composition of ascidian, the predominent ones were asparagine, glutamic acid, taurine, aspartic acid, proline, and lysine in order and the sum of these amino acids occupied $85.0\%$ of the total free amino acid while methionine and arginine were poor.

• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• Journal of Distribution Science
• /
• v.13 no.5
• /
• pp.103-111
• /
• 2015

Purpose - When it comes to first impressions of family restaurants, people basically think of the following factors: cozy, a refreshing space, indoor lighting, atmospheric music, the best-quality service through mutual interactions with employees, birthday events, follow-up customer management, brand image, and many others. Focusing on such family restaurants characteristics, with consumption experience and customer satisfaction determined as mediator variables, this study looks into the selection factors that affect customer loyalty when choosing a family restaurant. Subsequently, the study conducts an empirical analysis of these selection factors with the greatest influence. Research design, data, and methodology - This study analyzed 200 total surveys of family restaurant customers including college students, workers, housewives, and others. The survey was conducted over two weeks in May 2014. For statistical processing, SPSS 21 was used for factor analysis and reliability analysis as well as AMOS for structural equation analysis. In terms of a variable that would influence either consumption experience or customer satisfaction at the restaurants, the study introduced the concept of customer equity. The study designed a model based on a hypothesis developed using the following factors: customer encounter service value, customer convenience value, brand equity, relationship equity, and other factors defined as components of customer equity by Rust et al. (2000) determined as independent variables as well as with customer experience and customer satisfaction set as mediator variables. The hypothesis, after all, assumed that customer loyalty would be positively (+) influenced. Results - The analysis results from the study reported that brand value, customer encounter service value, and relationship value have positive (+) effects on consumption experience and customer satisfaction. However, as for customer convenience value, this turned out not to have a statistically significant influence on consumption experience and customer satisfaction. In regard to a relation between consumption experience and customer satisfaction, the results showed that the former affects the latter, and in terms of intervening variables, both of these appeared to have a positive (+) effect on customer loyalty. Conclusions - This study suggests that family restaurants should look for strategies that focus on how to promote customer relationships. For example, restaurants could try birthday events or discount events to achieve this goal. Since the study ended up realizing relatively low levels of suitability and statistical significance, the path of the study changed. After all, in order to increase suitability and statistical significance, the study had to eliminate factors such as service quality and others and for this reason the study was unable to conduct the analysis as initially planned. In addition, the data samples of the research were mainly gathered from students, which made it hard to say that the analysis was carried out on samples from every different group. Future research should analyze the characteristics of each group of customers for factors affecting customer satisfaction and customer loyalty in the family restaurant chain.