• Journal of Korea Water Resources Association
• /
• v.54 no.11
• /
• pp.985-998
• /
• 2021

In general, the upstream dam changes downstream flow regime dramatically, i.e., from natural flow regime to hydropeaking flows. This study investigates the impact of the natural flow pattern on downstream fish habitat in a regulated river in Korea using the physical habitat simulation. The study area is a 13.4 km long reach of the Geum-gang River, located downstream from the Yongdam Dam, Korea. A field monitoring revealed that three fish species are dominant, namely Zacco platypus, Coreoleuciscus splendidus, and Opsariichthys bidens, and they account for 70% of the total fish community. Specially, Opsariichthys bidens is an indigenous species in the Geum-gang River. The three fish species are selected as target fish species for the physical habitat simulation. The Nays2D model, a 2D shallow water equation solver, and the HSI (Habitat Suitability Index) model are used for hydraulic and habitat simulations, respectively. To assess the impact of the natural flow pattern, this study uses the annual natural flow regime and hydropeaking flows from the dam. It is found that the natural flow regime increases significantly the Composite Suitability Index (CSI) in the study reach. Then, using the Building Block Approach (BBA), the scenarios for the modifying dam operations are presented in the study reach. Both Scenario 1 and scenario 2 are proposed by using the hydrological method considering both magnitude and duration of the inflow and averaging the inflow over each month, respectively. It is revealed that the natural flow regime embodied in scenario 1 and scenario 2 increases the Weighted Usable Area (WUA) significantly, compared to the hydropeaking flows. In conclusion, the modifying the dam operations by restoring to the natural flow pattern is advantageous to fish community.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.7
• /
• pp.758-769
• /
• 2003

In this research, I classified adult women's back types through anthropometric measurement and photographic measurement to present a judging individual body size according to the type. Also, Ⅰ calculated regression fomula by types and presented the basic bodice pattern. The results were as follows: 1. The result of factor analysis indicated that 5 factors were extracted and those factors comprised 75.89% of total variance. 2. According to the cluster analysis, Ⅰclassified the back types into 6 types. Type 1 was passive posture in the upper and the lower parts of the back. Type 2 was active posture in the upper and the lower parts of the back. Type 3 had the lowest protrusion of the back. Type 4 had the upper part of the back which is mostly bent downward. Type 5 was the most suitable shape. Type 6 had the lower part of the back which was turned over the most. 3. Ⅰconducted a discriminant analysis to judge the body types of individuals. 4. For the calculation of measurements necessary for the basic bodice pattern, Ⅰpresented regression formulas by each type. 5. By conducting the wearing experiments, Ⅰsuccessfully made the final basic bodice patterns by types. As a result of comparative experiments between the basic bodice patterns and comparison bodice pattern, the suitability of basic bodice patterns were more highly assessed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.813-819
• /
• 2013

The authors have developed a test system for a hemispherical resonator gyroscope by using NI FPGA equipment. We have verified its suitability for the research of resonator gyroscopes through several tests: deriving resonance, controlling amplitudes, and estimating resonator parameters. The authors have adjusted a vibrating pattern to be aligned with the driving axis (or electromagnets). This pattern alignment is a basic and important operation of the FTR mode, which is one of operating modes for resonant gyroscopes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.390-401
• /
• 2002

This study was to evaluate the fitness and the suitability of size specification of the ready made jacket for women by analysing pattern size and space between skin and clothing using 3D scanner. The results were as follows: 1. Pattern B had the lowest score and the feeling of wearing was significantly different among the given patterns even though all jacket size specification were the same. 2. Ease amount was different between each brand even though the jacket size specification was the same due to the different pattern grading rules. And increasing grading amounts were bigger in horizontal direction rather than in vertical direction. 3. We could obtain accurate a 3 dimensional figure, using 3D scanner which was very useful and more accurate than 2 dimensional data using photography method. 4. Analyzing the average space between skin and clothing of each pattern, there was no significant difference in the average space between skin and clothing among all patterns except waist part of B88 size. And analyzing the average space between skin and clothing of each measured body parts by each size, there existed a significant difference in the interscye, abdomen and hip parts.

• Transactions of Materials Processing
• /
• v.25 no.5
• /
• pp.319-324
• /
• 2016

Recently, the roll forming process is one of the most widely used processes for manufacturing automotive part. In this study, flower patterns of roll forming process were designed to manufacture an ultra high strength bumper beam using the finite element analysis. Three types of flower patterns such as the basic type, the rotation type and the split type were designed based on the constant arc length forming method using the design software, UBECO Profil. Finite element analysis was performed to evaluate the suitability of designed flower patterns in terms of the longitudinal strain and the bow defect. The analytical results show that the split type represents more uniform longitudinal strain distributions and a good dimensional accuracy than other types of flower patterns.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.399-403
• /
• 2004

Education of clothing and textiles in the university is various according to the purposes. Among that clothing construction and practice is what is needed the most in understanding the process of apparel producing, and is the basic subject of areas from apparel designs to quality management. Producing apparel starts from planning the bodice pattern according to the human body shape. Basic bodice pattern should be highly practical so that production of all items of apparel patterns can be possible. Also, a basic bodice pattern needs to be planned in the way that even beginners can use it by classifying sizes according to each body measurements. Thus in this study. bodice patterns will be produced in way of draping method subjecting university students in early 20s. standardized and classified sizes will be calculated from it and bodice pattern made by studied flat pattern method will be examined and compared so that finally suitability will be compared. As a result of examining and comparing bodice patterns made by draping method and studied flat pattern method on the model of the human body produced by plaster method, sizes were classified into 5 levels. As a result of evaluation of creation. satisfying consequence from various body shape was acquired and it is expected of the beginners who are stating from clothing construction and practice to be educated by using the result of this study.

• International Journal of Automotive Technology
• /
• v.6 no.1
• /
• pp.53-63
• /
• 2005

We propose a fuzzy neural network (FNN) theory capable of deciding the quality of a road image prior to extracting lane-related information. The accuracy of lane-related information obtained by image processing depends on the quality of the raw images, which can be classified as good or bad according to how visible the lane marks on the images are. Enhancing the accuracy of the information by an image-processing algorithm is limited due to noise corruption which makes image processing difficult. The FNN, on the other hand, decides whether road images are good or bad with respect to the degree of noise corruption. A cumulative distribution function (CDF), a function of edge histogram, is utilized to extract input parameters from the FNN according to the fact that the shape of the CDF is deeply correlated to the road image quality. A suitability analysis shows that this deep correlation exists between the parameters and the image quality. The input pattern vector of the FNN consists of nine parameters in which eight parameters are from the CDF and one is from the intensity distribution of raw images. Experimental results showed that the proposed FNN system was quite successful. We carried out simulations with real images taken in various lighting and weather conditions, and obtained successful decision-making about $99\%$ of the time.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.189-202
• /
• 2019

This study develops a bodice pattern for high school girls aged 17 to 19 that use virtual garment simulation. The study developed a bodice pattern based on the fit evaluation result for two selected bodice patterns. The basic formula of the design method based on the result of 3 times of fit evaluation is as follows: waist back $length=stature/8{\times}1.85cm$, waist front length=waist back length+bust/40+0.7cm, front bust girth=bust/2+4cm, back bust girth=Chest/2+3cm, armscye depth=Chest/4+0.5cm, back interscye length=bishoulder length -1.2cm, front interscye length=back interscye length -1.2cm, front neck width=back neck width -0.3cm. The developed bodice pattern used Bishoulder Length as a criteria for the calculation formula of back interscye length, and back interscye length as a criteria for the calculation formula of front interscye length. The fit evaluation showed the relevance of the bishoulder length, front interscye length, and back interscye length based on a comparison of the calculated figure. A bodice pattern with great body suitability and fitness to high school girls was developed through 3D virtual garment simulation that calculated the application of body proportion to width. This study only analyzed the evaluation result of a virtual model only in a representative form; however, a pattern study is also proposed to compare and analyze the design methods of patterns by body type.

• Fashion & Textile Research Journal
• /
• v.8 no.2
• /
• pp.196-202
• /
• 2006

In this study the swimwear pattern focused on a typical middle-aged women's body was developed and discussed. To determine the characteristics of a typical middle-aged women's body, their actual bust were cast. According to a generated flattened body surface shell, the right side of pattern was designed considering stretching ratio of swimwear materials as shown in the figure 3. Special features of the developed swimwear pattern are a bust dart, a particularly designed lining, a power-net, and a brassiere-cup. Against a commercial swimwear pattern, the darts were applied to bust area considering its volume. The lining was attached on the entire right side except brassiere part, and power-net was added twice on belly and hip part. As a result, silhouette and body shape were improved. The new brassiere-cup was designed and made to satisfy the middle-aged women's demand about their bust volume. Swimwear fitting test was performed, and it was evaluated. The developed swimwear rated activity, body support, entire silhouette, pressure, comfortable fitting, suitability with body figure, nudity higher by comparison with a commercial swimwear, as shown in the Table 6. Specially the developed swimwear satisfied future customers about a bust, a hip, a waist, a belly area, which the middle-aged women are not confident. Reducing exposure of an armhole and upper leg area, it also satisfied them. New developed swimwear pattern will provide useful reference to swimwear businesses targeting middle-aged women.

• Journal of Fashion Business
• /
• v.8 no.4
• /
• pp.22-32
• /
• 2004

The purpose of this research is to know the pattern of Hanbok Jegory with measuring Jegory and studying manufacturing method of the Jegory used currently. It is a purpose to find constitutional problem caused by the character of the bending somatotype and, to study the standard model of the Jegory for bending somatotyped women in old age, by comparison of this fitness for bending-somatotyped women in old age. The results obtained are as follows; 1. The kinds of measurements considered in manufacturing process are Hwajang Length, Bust girth, and the skirt length. The length of Jegory and width of Neck are also considered. 2. Manufacturers consider somatotype the most important thing when they make Jegory for women in old age. Front length, Back length and Width of the Jegory are considered secondly important. 3. The results of the comparison show that the Standard Hanbok drafting method is not suitable for drafting Jegory for bending somatotyped women in old age. 4. The suitability test for the model designed by the above methods shows that it fits in bending somatotyped women in old age better than standard drafting method. The results show the superiority of the above methods especially in the breast width, the Godae length, and the adaptedness to the body.