• Strategy21
• /
• s.36
• /
• pp.180-214
• /
• 2015

The Republic of Korea navy challenged from the unexpected surprise attacks by the North Korea navy, albeit, the developments of up-to-date naval forces' technology, and the ceaseless efforts for war preparedness. My study divided into two categories. Qualitative methods used for literature review of international relations theory related to the war onset and for investigating events occurred on the Peninsula and its surrounding seas from 1968 to 2007. Quantitative method used such as the analyses of national power index of the two Koreas, the United States, and China, the uses of equation model to calculate power index of alliance, COPDAB(Conflict and Peace Data Bank) index analysis. Like Choi's study on East Asia maritime conflict, as a conclusion, considering both AT theory and maritime national power as a tool for predicting maritime conflict in the Peninsula proved significant. Based on the study, ROK navy need to prepare for the maritime conflict because the results showed North Korea would initiate maritime disputes sooner or later using fatal asymmetric forces and methods. As a policy suggestion, we are required to maintain a concrete ROK-US alliance ties and to construct naval forces due to the deterring functions of maritime national power.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.2
• /
• pp.17-26
• /
• 2015

In this study the location condition and the management of the Rural Experience Tourism Villages located around unified Cheongju city has been surveyed or investigated. On the basis of the results of the survey or investigation this study is to suggest a way to make activate the Rural Experience Tourism Villages which have been inactive. The ways of the research include the understanding of what means the activation of rural areas and then this study is to find the problems with the Rural Experience Tourism Villages and to suggest final ways or plans after the field investigation of the condition of the location and management of the Villages. In this study I had full understanding of the concept of the activation for rural areas and the humanistic and geographical characteristics and then made a wide investigation and analysis of the location condition and the management of the Rural Experience Tourism Villages in this area. Based on the theory and the results of the actual investigation I made a suggestion of basic direction for the improvement of the Villages and the ways for activation of the Villages. I really expect these suggestions of mine to make active contribution to make the actual plan through the promotion of the Rural Experience Tourism Villages.

• Journal of the Korea Furniture Society
• /
• v.27 no.1
• /
• pp.15-25
• /
• 2016

Increasing concerns of environment need to make change furniture field to more environmentally friendly approach, such as reuse of by-products from wooden products. As it is, the methods of recycling wood for industrial purposes have the advantage of productivity and adaptability. However, the industrial way is required a certain production facility of processing wooden by-products and has possible hygienic problems due to contaminated sources. Many designers have developed their own methods for reuse of wood in unique and artistic ways. Even so, because of confined sources, it could be not enough supply. Therefore, I developed the design methodology utilizing wooden by-products from S Design Company to relieve former ways' problems. The design suggestion took materials from a safe and abundant source. The wooden leftover pieces were connected together with epoxy clay, so previous process traces of furniture are remained as a decorative factor. Moreover, the synthesized material was able to be processed by ordinary woodworking facilities without additional installations. In doing so, console table focused on a commercial purpose and dining table for an artistic objective were successfully fabricated as final suggestions. In consideration of the proposal using wooden furniture leftovers, diverse recycling designs should be investigated for future reference.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.757-765
• /
• 2002

This paper analyzes three theories for land degradation assessment and internationl/domestic methods for land degradation monitoring and assessment. Under the guidance of absolute degradation thought, this paper proposes the technological framework for monitoring and appraising cultivated land degradation based on the 3S technique. We can apply 3S technique and analyze the nature, the environmental, the social, and the economic elements which influence the land utilization and degradation synthetically, to set up the indicator system of the cultivated land degradation monitoring and assessment based on 3S technique; to propose the degradation information extraction methods based on 3S technique; to create the quantitative assessment model and method for land degradation; to analyze the ecological environment response of land use and degradation quantitatively; and to propose the measure, policy and suggestion for solving the land degradation problem from the point of view of land utilization.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.355-360
• /
• 2018

We propose a method to connect partial image in whole image to partial image in whole image of other internet site. For this study, we have developed four partial image generation methods and retrieval methods. A method of 'image segmentation' that cuts out only partial images that want to provide information from the whole image, a method of 'creating an image block' that finds outermost points of a cut-out partial image, a method of 'Stamp transformation of outer points', which connects outer points and registers them as the most similar image stamp, and a retrieval method that connects image stamps with other image stamps are developed. We suggested a image search UI that can use image stamps in various ways.

• Current Photovoltaic Research
• /
• v.7 no.2
• /
• pp.46-50
• /
• 2019

The photovoltaic (PV) system consists of solar cells, solar modules, inverters and peripherals. The related evaluation and certification are proceeding as standards published by the IEC (International Electrotechnical Commission) TC (Technical Committee) 82. In particular, PV module is a component that requires stable durability over 20 years, and evaluation in various external environments is very important. Currently, IEC 61215-based standards are being tested, but temperature, humidity, wind and solar radiation conditions are not considered in all areas. For this reason, various types of defects may occur depending on the installation area of the same photovoltaic module. In particular, the domestic climate (South Korea) is moderate. The various test methods proposed by IEC 61215 are appropriate, excessive, or insufficient, depending on environmental condition. In this paper, we analyze the climate data collection for one year to understand the vulnerability of this test method of PV modules. Through this, we propose a test method for PV module suitable for domestic climatic conditions and also propose a technical consideration for installation and design of PV system.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.1
• /
• pp.177-191
• /
• 2021

Objectives: This study aimed to combine the satisfaction survey results and suggestion for continuing education of the emergency medical technicians through a systematic review of continuing education of the emergency medical technicians. Methods: This review focused on previous studies published until 2020 that were associated with the continuing education of emergency medical technicians. We followed the guidelines set for each phase of the study and selected the 26 studies that met the selection criteria for the analysis. Results: The level of satisfaction with continuing education for emergency medical technicians was low. The most frequently suggested method for continuing education was patient case presentation. The answers to the desired training subjects of the continuing education program varied. Finally, studies on continuing education have not been published continuously. Conclusion: To enhance the satisfaction and competence of continuing education, we need to provide various programs that reflect the needs of emergency medical technicians attending maintenance training. In addition, various methods should be considered to improve the attendance rate for continuing education, and further investigations and research should be actively conducted on continuing education in the future.

• Journal of Engineering Education Research
• /
• v.16 no.1
• /
• pp.45-53
• /
• 2013

The Korean Society for Engineering Education (KSEE) has been conducted scholarship meeting, workshop, and publicated academic journal, Engineering Education Research, since 1998. Kim Jin-soo analysed 'Engineering Education Research' on methods of research and contents. However, there are an in crease in quantity since then, it needed to analyse and arrange. This study analysed all 417 papers which were published from 1998 to 2012. The conclusion is as in the following. First, the number of collections published has been increasing up to 6 per year. 75.5% of the lead author's institution are universities, and Engineering Education Innovation Center researcher has been increasing steadily up to 8.9%. Research about Engineering Education Methods and Programs are being mostly studied. Apart from classified field in this, a study on the psychological characteristics of technology students are being steadily researched. In papers, the literature/development research method is used the most frequently (54.6%), the research study (39.9%) is the next and the experimental research method (5.5%) is followed by. Since 2006, study using the experimental research method is the growing lately. Second, characteristic of study between institution of lead author, a field of study, a number of study and methods of research by cross analyzing. The result is as in the following. In case of university and Engineering Education Innovation Center researcher studied much more about Engineering Education Methods and programs, research laboratory researcher tend to study about Engineering Educational Philosophy and Policy. Also, foreign researcher tend to introduce Engineering Education Example and Lecture. In case of university and foreign researcher used the literature/development research method frequently. Engineering Education Innovation Center and research laboratory and school researcher used the research study much more. There is no difference between a field of study and research methods. Finally, research strategies and new direction for improving the engineering education journal's papers at the section of discussion and suggestion were suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1678-1689
• /
• 2008

Recently, OOM(Object-Oriented Method) access method which begins to apply to software development is emphasizing development cost and time reduction through independent software reuse. But because of planning to the exclusion of the lack of knowledge and expansion or performance for development technology many problems are coming out. Therefore, this thesis suggests Effective Object-Oriented Modeling methods considering the plan for higher productivity enhancement of software in the software development life cycle. Effective Object-Oriented Modeling method includes, methods, Use Case modeling methods, Analysis Modeling methods, Design Modeling methods and others. This thesis suggests Framework model method read in characteristics as follows. First, suggestion about effective object-oriented standard model development, Second, retrenchment of software development or maintenance cost, Third, solution about uncertain problems of projects in line with the application of new technology.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.428-439
• /
• 2011

It is well known that the sound characteristics of Korean bell depend on the shape and the alloy constituents. Development of the methods to acquire exact shape data and alloy constituents of the whole body of the bell is very important for the study and systematic management of Korean bells. The practical scanning and modeling methods to get shape data from optical triangulation laser scanners are proposed. The 3D shape data by the proposed methods can be the basis of diverse measurements such as curvature, volume, thickness and the distance between any two points. A nondestructive alloy constituents measuring method which can overcome the limitations of partial data collection and damages to Korean bells is also suggested to get the whole alloy characteristics. Following the developed methods, the data of the shapes and alloy constituents of 18 Korean bells are collected and the errors of existing measurement data for the shape have been corrected.