• The Journal of Engineering Geology
• /
• v.26 no.2
• /
• pp.177-185
• /
• 2016

This work investigates whether stress changes induced by an earthquake can be estimated using the deformation measured by high-resolution borehole strainmeters. We estimate the changes in the orientation and magnitude of the principal compression stresses using borehole strainmeter data recorded before and after the M7.2 El Mayor-Cucapah earthquake on April 4, 2010. Clear differences in the stress orientations and magnitudes are apparent before and after the event. The change in stress orientation appears related to subtle increases of stress in the tectonic maximum principal orientation, which is in agreement with the earthquake focal mechanism solution. The sudden stress drop at the onset of the earthquake was 10⁻³-10⁻² MPa in the principal orientations. The Coulomb stress transfer model, which can estimate stress transfer, predicts a shear stress increase of (0.1-0.6) × 10⁻² MPa at the strainmeter site, which is in line with the measured data (0.3-0.8) × 10⁻² MPa. Overall, our results suggest that borehole strainmeter data reflect the subtle stress changes associated with earthquake occurrence, and that such data can be utilized for earthquake-related research.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.2
• /
• pp.142-150
• /
• 2006

PURPOSE : The 3rd molar extraction of mandible is common in out-patient office of oral and maxillofacial surgery. And it is dynamic minor operation with changes of vital signs. most of patients are already sensitive about their dental treatment. The changes of emotion are reached to the highest level when patients is laid down to be treated on unit chair. It can be induced to undesirable accidents as to this fear. The undesirable complications are nausea, vomiting, hyperventilation, dyspnea, syncope, shock and so on. The severe changes of vital signs may influence their behavior and make serious medical malpractice or suit such as fracture of dental instruments and injury of proximal area. METHOD AND PATIENTS : A total of 99 selected normal patients were reviewed. Among this, 70 patients(43 men, 27 women with statistical significance) were included in this study. Each steps(pre-anesthesis, 5 minutes after anesthesis, just after mucogingival incision, just after tooth section, just after suture and gauze biting) were investigated for a change of a vital signs. It is analyzed to 2 categories,"Means" and "Tendency". The "Means" is the amount of vital signs changed in comparison with pre-step during operation. That means is the amount of vital changes by each step operation. Next, " Tendency" is changes of vital signs in comparison with step1 during operation. RESULT : This is the changing tendency of vital signs with time. That is active effect of fear and pain. Thus this "Means" and "Tendency" will present a sudden changes of vital signs and it can lead to more safe treatment. CONCLUSION : Thus, the purpose of this study is, through careful operation in each step, to less on patients' complication and increase trust between patient and OMFS. This study is a first article shown with the amount of "Means" and "Tendency" in vital signs, when a third molar of mandible is extracted. This study will be base study of patients with general diseases, because it selected only patients without general diseases.

• Korean Institute of Interior Design Journal
• /
• v.14 no.4 s.51
• /
• pp.87-94
• /
• 2005

Lately due to the sudden growth of the construction of an apartment complex in domestic market, many construction companies are eager to provide various public facilities to increase the apartment distribution rate. An introduction of a fitness center is popularized as a part of such development. There has been a continuing development in a private fitness based on analyzing the user's data. However a public fitness is quite different from the private in terms of a user's classification, preference rate, the pattern of use, and location which requires a different facility plan. Nevertheless, all these days a public fitness in an apartment house has been developed without a specific facility plan based on relevant materials. It is worried that such development would cause the facilities not to function as appropriate resident facilities and sink to idle ones. Therefore the purpose of this paper is to make the standard considered in facility planning in future and the base to guide an applying method. In the paper the present condition of fitness centers inside apartment houses has been compared to analyze the progress of the existing facilities and the appropriateness of the organization and the structure division. The result of the research shows that public resident facilities is not the place to perform passive role for fixed activities but one to form a community through the human relationship based on the facility. Therefore a fitness center inside the apartment complex have to be designed to provide service and leisure space as one of main community facilities for residents. To obtain this purpose, when choosing facilities of an apartment complex, first of all the residents' standard of living, apartment size, residents' distinction rate of age and sex, the needs of the times should be fully considered Secondly, the size of each facility space have to be decided based on the practical data analysis in facility use such as space preference, average staying time. Also, future living culture requires the change of the function and space according to the change of social values, so continuing research and data analysis are required to related to fitness center inside an apartment complex in order to present systematic approaching method and the paper will be expected to be a little step toward it.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2013

Lane closure in freeway work zone due to maintenance and repair of freeway facilities results in abrupt change of traffic flow. Sudden change of traffic flow results strong interactions among vehicles, and reduces capacity compared to the ordinary traffic condition. Such capacity reduction is likely to cause congestion, traffic queues, and economic loss cost. This study aims to determine the base capacity for a short-term freeway work zone that can be used to establish a work zone schedule in advance without any traffic impact. First, the research collected detector data and schedule data of road works on all freeways in Korea. Second, the research determined 23 study sites finding the capacity values of work zone after matching two kinds of data. All study sites had varying characteristics regarding traffic flow being adjacent to work zone during road works. The capacity values were reviewed in terms of lane closure configuration, the types of work, and design speed. Finally, research proposed capacity values for a short-term freeway work zone with the design speeds of 100 kph, 120 kph and 1,700 pcphpl, 1,750 pcphpl, respectively.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.123-128
• /
• 2018

MDF was treated on the surface of MDF with fire retardant lacquer, water-soluble flame retardant coat and water-soluble wood cover on the MDF wood, and the pyrolysis characteristics and the atmospheric noxious gas generation characteristics were investigated by using the large capacity thermal analyzer. As a result of investigating pyrolysis and combustion gas generation characteristics after treatment of 0.11 / 11.55 g in terms of mass ratio, it was found that combustion starting time was slightly longer than that of pure MDF in the case of treatment with fire retardant lacquer. The combustion temperature was increased from $340^{\circ}C$ to $450^{\circ}C$. The pyrolysis and combustion gas generation characteristics of the MDF wood treated with the aqueous flame retardant coat showed the changes in combustion starting time and temperature from $260^{\circ}C$ to $542^{\circ}C$ for about 26 minutes at the mass ratio of 0.13 / 11g. Also, when the commercially available waterproof wood cover was treated with 0.13 / 11.55 g of MDF, the sudden weight change tended to increase from $300^{\circ}C$ to $370^{\circ}C$ and showed a second change at approximately $500^{\circ}C$.

• Journal of the Korean Institute of Gas
• /
• v.26 no.6
• /
• pp.9-15
• /
• 2022

In order to verify the durability of the high-pressure hydrogen tank in the operating pressure range, a hydraulic rupture test should be performed. However, if the bubbles generated by the initial injection process of water are attached to the inner wall of the tank and remain, a sudden pressure change of the bubbles during the rupture of the pressurized tank may cause shock and noise. Therefore, in this study, the flow velocity required to remove the bubbles remaining on the inner wall of the tank was predicted through simplified formulas, and the shape of the injection nozzle to maintain the flow velocity was determined based on the shape of the hydrogen tank for the hydrogen bus. In addition, a numerical model was developed to predict the change in flow velocity according to the inlet pressure, and an experiment was performed through a model tank to prove the validity of the prediction result. As a result of the experiment, the flow velocity near the tank wall was similar to the predicted value of the analysis model, and when the inlet pressure was 1.5 to 5.5 bar, the minimum size of the removable bubble was predicted to be about 2.2 to 4.6 mm.

• Journal of fish pathology
• /
• v.24 no.2
• /
• pp.153-160
• /
• 2011

The specific antibody response of olive flounder, Paralichthys olivaceus to change in rearing-environmental conditions post immunization with antigen (bovine serum albumin, BSA) and different routes of antigen administration were investigated by enzyme-linked immunosorbent assay (ELISA). To test the effect of routes of antigen administration, flounder were injected intraperioneally or intramuscularlly with 1 mg of BSA. In addition, to test the effect of change in environmental condition post immunization, flounder were injected intraperioneally with 1 mg of antigen, and then were exposed to acute thermal change (the water temperature (WT) was decreased from $21^{\circ}C$ to $15^{\circ}C$ within 30 min and maintained at $15^{\circ}C$ for 3 h), handling (fish were caught and subsequently held out of water for 1 min) or heavy oil (76 g/200 L for 2 days). Consequently, there was no significant difference between intraperioneal (IP) and intramuscular (IM) injections except at 10 days post-immunization. With these results, it suggests that both 1M and IP injections may be used as route of vaccination. Furthermore, no significant difference was observed in the antibody response among the groups exposed to heavy oil, handling, sudden drop of WT and positive control except at 10 days post-immunization. From these results, it was confirmed that specific antibody response was not affected by the above mentioned rearing-environmental conditions, suggesting that vaccination can be employed at changing rearing-environmental conditions.

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.146-160
• /
• 2023

The spread of non-face-to-face services due to the COVID-19 pandemic has brought many changes in consumers' purchasing behavior and attracted much attention to new services. Could trying new services caused by this sudden environmental change alter consumers's choice patterns? This study proposes the research question of whether these new service experiences can change consumers' existing choice behavior, especially for risk-averse consumers who maintain their existing choice behavior or prefer safe alternatives. In this study, we examined whether trying out an unmanned payment services, one of innovative services that emerged after the pandemic crisis, can change the existing choice behavior of risk-averse consumers, i.e., make them more likely to prefer risky alternatives to safe alternatives. To accomplish these research goals, this research conducted one pilot survey and one study. The results of pilot survey showed that the stronger the prevention-focus tendency, the lower the self-efficacy to use the innovative service, with a negative relationship between them. Based on these findings, the study used an experimental method to examine the interaction effects between the use of innovation services and consumers' regulatory focus in a choice behavior and to explore the psychological mechanisms behind them. According to the results, it is found that prevention-focused consumers were more likely to choose risky alternatives and dissimilar extended brands following a trial of an unmanned payment service compared to not using that service. In contrast, promotion-focused consumers did not show different choice patterns regardless of following a trial of an innovative service. Furthermore, these results for prevention-focused consumers confirm the role of self-efficacy as a psychological mechanism. These findings shed light on the role of self-efficacy which has discussed in positive psychology into marketing area. Moreover, practical and academic implications are suggested by the finding that behavioral change occurs in risk-averse consumers, who are known to be hesitant to try new behaviors, indicating market expansion related to potential consumers for the use of the innovation services.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.140-149
• /
• 1996

Cursive characters are written on an economical principle to reduce the motion of a pen in the limit of distinction between characters. That is, the pen is not lifted up to move for writing a next stroke, the pen is not moved at all, or connected two strokes chance their shapes to a similar and simple shape which is easy to be written. For these reasons, strokes and korean alphabets are not only easy to be changed, but also difficult to be splitted. In this paper, we propose a curvature stroke modeling method for splitting and matching by using a structural primitive. A curvature stroke is defined as a substroke which does not change its curvanture. Input strokes handwritten in a cursive style are splitted into a sequence of curvature strokes by segmenting the points which change the direction of rotation, which occur a sudden change of direction, and which occur an excessive rotation Each reference of korean alphabets is handwritten in a printed style and is saved as a sequence of curvature strikes which is generated by splitting process. And merging process is used to generate various sequences of curvature strikes for matching. Here, it is also considered that imaginary strokes can be written or omitted. By using a curvature stroke as a unit of recognition, redundant splitting points in input characters are effectively reduced and exact matching is possible by generating a reference curvature stroke, which consists of the parts of adjacent two korean alphasbets, even when the connecting points between korean alphabets are not splitted. The results showed 83.6% as recognition rate of the first candidate and 0.99sec./character (CPU clock:66MHz) as processing time.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.316-326
• /
• 2014

Determination of the late marginal heading date (LMHD), which would allow estimation of the late marginal seeding date and the late marginal transplanting date, would help identification of potential double cropping areas and, as a result, establishment of cropping systems. The objective of this study was to determine the LMHD at 51 sites in Korea. For these sites, weather data were obtained from 1971 to 2000 and from 1981 to 2010, which represent past and current normal climate conditions, respectively. To examine crop productivity on the LMHD, climatic yield potential (CYP) was determined to represent the potential yield under a given climate condition. The LMHD was calculated using accumulated temperature for 40 days with threshold values of $760^{\circ}C$, $800^{\circ}C$, $840^{\circ}C$ and $880^{\circ}C$. The value of CYP on a given LMHD was determined using mean temperature and sunshine duration for 40 days from the LMHD. The value of CYP on the LMHD was divided by the maximum value of CYP (CYPmax) in a season to represent the relative yield on the LMHD compared with the potential yield in the season. Our results indicated that the LMHD was delayed at most sites under current normal conditions compared with past conditions. Spatial variation of the LMHD differed by the threshold temperature. Overall, the minimum value of CYP/CYPmax was 81.8% under all of given conditions. In most cases, the value of CYP/CYPmax was >90%, which suggested that yield could be comparable to the potential yield even though heading would have occurred on the LMHD. When the LMHD could be scheduled later without considerable reduction in yield, the late marginal transplanting date could also be delayed accordingly, which would facilitate doublecropping in many areas in Korea. Yield could be affected by sudden change of temperature during a grain filling period. Yet, CYP was calculated using mean temperature and sunshine duration for 40 days after heading. Thus, the value of CYP/CYPmax may not represent actual yield potential due to change of the LMHD, which suggested that further study would be merited to take into account the effect of weather events during grain filling periods on yield using crop growth model and field experiments.