• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.2
• /
• pp.106-114
• /
• 2017

This paper presents an automated subsurface micro void detection technique based on pulsed infrared thermography for inspecting epoxy molding compounds (EMC) used in electronic device packaging. Subsurface micro voids are first detected and visualized by extracting a lock-in amplitude image from raw thermal images. Binary imaging follows to achieve better visualization of subsurface micro voids. A median filter is then applied for removing sparse noise components. The performance of the proposed technique is tested using 36 EMC samples, which have subsurface (below $150{\mu}m{\sim}300{\mu}m$ from the inspection surface) micro voids ($150{\mu}m{\sim}300{\mu}m$ in diameter). The experimental results show that the subsurface micro voids can be successfully detected without causing any damage to the EMC samples, making it suitable for automated online inspection.

• Geophysics and Geophysical Exploration
• /
• v.20 no.2
• /
• pp.61-71
• /
• 2017

Recently, ground-penetrating radar (GPR) surveys have been actively carried out for precise subsurface void investigation because of the rapid increase of subsidence in urban areas. However, since the interpretation of GPR data was conducted based on the interpreter's subjective decision after applying only the basic data processing, it can result in reliability problems. In this research, to solve these problems, we analyzed the difference between the events generated from subsurface voids and those of strong diffraction sources such as the buried pipeline by applying the edge detection technique, which is one of image processing technologies. For the analysis, we applied the image processing technology to the GRP field data containing events generated from the cavity or buried pipeline. As a result, the main events by the subsurface void or diffraction source were effectively separated using the edge detection technique. In addition, since subsurface voids associated with the subsidence has a relatively wide scale, it is recorded as a gentle slope event unlike the event caused by the strong diffraction source recorded with a sharp slope. Therefore, the directional analysis of amplitude variation in the image enabled us to effectively separate the events by the subsurface void from those by the diffraction source. Interpretation based on these kinds of objective analysis can improve the reliability. Moreover, if suggested techniques are verified to various GPR field data sets, these approaches can contribute to semiautomatic interpretation of large amount of GPR data.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.125-132
• /
• 2003

This study introduces a simulation model of radar responses from subsurface voids in concrete for their frequency variations. In this model, resolution and attenuation characteristics due to frequency variations are analyzed at each material interface which has different electromagnetic property. This model aims at the selection of best frequency of radar which can analyze the thickness of voids in concrete from radar responses. It can also be applied to estimate the limitation of propagation depth of radar on subsurface voids in concrete. The computed results show the radar images obtained by using a radar signal processing technique using convolution.

• Journal of Korean Society on Water Environment
• /
• v.22 no.3
• /
• pp.546-556
• /
• 2006

The purpose of this study is to improve the polluted stream water quality by pilot-scale five different constructed wetlands (CWs). Cell 1 to 3 are newly designed 2SFCW (Surface-subsurface flow CW) with 1 to 3 flow shifters (FS) in the middle of the wetland system. Cell 4 and 5 are control CW (CCW), but Cell 5 is the same type as Cell 3. The FS, which converts the route of surface and subsurface flow between two wetlands connected in series, was able to enhance the treatability of TN via nitrification and denitrification and of SS due to filtration and sedimentation. The void fraction and dispersion number of Cell 1, 2 and 3 obtained from the RTD analysis were found to be 0.73 and 0.17, respectively. COD and TP removal efficiencies of Cell 1 to 3 were similar to that of Cell 4 and 5. SS removal efficiencies of Cell 1 to 3 and 5 with FS were 5-10% higher than that of Cell 4 without FS. TN removal efficiencies of Cell 1 to 3 were 3-14% higher than that of Cell 4 and 5. The average $R^2$ values of COD, SS, TN and TP obtained from nonlinear regression analysis were similar to the results of other researchers.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.151-156
• /
• 2009

Forward modelling of ground penetrating radar (GPR) data is implemented using a new finite element ray tracing technique. The method is different from conventional ray tracing techniques in that the radar cross section of buried targets, the effective area of the receiving antenna, and the attenuation along the raypath are computed. The forward models are used to understand radar signatures measured across various ground structures which are important in detecting engineering hazards at construction sites, void spaces beneath simulated road beds, as well as a learning tool to avoid pitfalls in radargram interpretation. Forward modelling of radar data also can be used in predicting possible structures present at cultural property sites.

• Journal of Korean Society of Forest Science
• /
• v.85 no.4
• /
• pp.571-576
• /
• 1996

The geological and hydrological survey was carried out in Hyuseok-dong landslide area(10 ha), Youngchoon-myeon, Danyang-gun, Choongcheongbuk-do. The results showed that the bed rocks in this area consisted of shale, sandstone and limestone, and the piles of stones debris were also scattered around the hill above the study area. Soil texture was sandy loam, and bulk density of the soil in the lower part of the area was higher than that of the upper part, but void ratio of the soil in the lower part was lower than that of the upper part. Subsurface water was springing out to the surface in many places in this area. In this area, the storms over 70mm/day were frequent during the summer period from June through September. It was concluded that the occurrence of landslide had a close relationship with the geological characteristics, hydrological conditions and the rainfall distribution.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.53-63
• /
• 2013

PURPOSES: The purpose of this study was to investigate the disintegration mechanism of concrete due to the infiltration of the moisture to the milling overlay pavement and to come up with a method to minimize the disintegration as well as verifying the effectiveness of the edge sealing and Fogseal method. METHODS : This study investigated the distress mechanism due to the infiltrated moisture remaining in the milling overlay pavement through chloride freezing test and verified the effectiveness of the sealing of the milling edge and fog seal methods, which have been devised to minimize the moisture infiltration, through laboratory water permeability test. Additionally, long-term pavement performance was compared for the effectiveness of the proposed method through under loading test, and field water permeability test was carried out to verify the field applicability of the proposed method. RESULTS: The result of the research confirmed that chloride deteriorates the concrete surface through disintegration and lowers its strength and that the laboratory moisture infiltration test verified the effectiveness of the milling edge sealing and fog seal methods in the deterrence of moisture infiltration to the overlay pavement with excellent long-term performance of the pavement treated with the proposed method. Although the field water permeability test revealed some deterrence of moisture infiltration of the milling edge sealing and fog seal methods to a certain extent, the difference was a little. CONCLUSIONS: The milling edge sealing and fog seal methods are limited in their effectiveness for the cases of improvident compaction management or mixture with large void, and it is believed that installation of subsurface drainage is more effective in these cases.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.9
• /
• pp.5-14
• /
• 2006

Generally, the sediments contain significant water, clay, colloidal fraction and contaminants, and can result in soft strata with high initial void, and its potential hazards in subsurface environments exist. Electrokinetic technique has been used in sedimentation for volume reduction of slurry tailing wastes and in remediation for extraction of contaminants from contaminated soils. In this research, the coupled effects of sedimentation and remediation of contaminated sediments are focused using electrokinetic sedimentation and remediation techniques from experimental aspects. A series of laboratory experiments including variable conditions such as initial solid content of the specimen, concentration level of the contaminant, and magnitude of applied voltage are performed with the contaminated sediment specimens mixed with ethylene glycol. Commercially available high specification Kaolin was used to simulate slurried sediment. From the test results, the settlement of specimen increases with increasing of applied voltage and decreasing of solid content and contamination level. The density of specimen increases due to settlement of specimen in the process of electrokinetic sedimentation and decreases due to extraction of organic contaminant in the process of electrokinetic remediation.