• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2013

Objective: To investigate changes in the invasive capacity of gastric cancer cells in vitro after expression inhibition of T lymphoma invasion and metastasis inducing factor 1 (Tiam 1) and underlying mechanisms. Methods: Using adhesion selection, two subpopulations with high ($M_H$) or low ($M_L$) invasive capacity were separated from the human gastric cancer cell line MKN-45 ($M_0$). Tiam 1 antisense oligodeoxynucleotide (ASODN) was transfected into $M_H$ cells with liposomes, and expression of Tiam 1 mRNA and protein was determined by RT-PCR and quantitative cellular-ELISA. Changes in the cytoskeleton, invasive capacity in vitro and expression of ras-related $C_3$ botulinum toxin substrate 1 (Rac 1), integrin ${\beta}1$ and matrix metalloproteinase 2 (MMP 2) between Tiam 1 ASODN transfected $M_H$ cells and non-transfected cells were observed by HE staining, cytoskeletal protein staining, scanning electron microscopy, Boyden chamber tests and cyto-immunohistochemistry. Results: A positive correlation existed between the expression level of Tiam l mRNA or protein and the invasion capacity of gastric cancer cells. After ASODN treatment ($0.43{\mu}M$ for 48 h), Tiam 1 mRNA transcription and protein expression in $M_H$ cells were decreased by 80% and 24% respectively (P < 0.05), compared with untreated controls, while invasive capacity in vitro was suppressed by 60% (P < 0.05). Morphologic and ultrastructural observation also showed that ASODN-treated $M_H$ cells exhibited smooth surfaces with obviously reduced filopodia and microspikes, which resembled $M_0$ and $M_L$ cells. Additionally, cytoskeletal distribution dramatically altered from disorder to regularity with reduced long filament-like structure, projections, pseudopodia on cell surface, and with decreased acitn-bodies in cytoplasm. After Tiam 1 ASODN treatment, the expression of Rac 1 and Integrin ${\beta}1$ in $M_H$ cells was not affected (P > 0.05), but that of MMP 2 in $M_H$ cells was significantly inhibited compared with untreated cells (P < 0.05). Conclusion: Over-expression of Tiam-1 contributes to the invasive phenotype of gastric cancer cells. Inhibition of Tiam 1 expression could impair the invasive capacity of gastric cancer cells through modulating reconstruction of the cytoskeleton and regulating expression of MMP 2.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.252-255
• /
• 2014

Indium tin oxide (ITO) films with various oxygen partial pressure from 0 to $6{\times}10^{-5}$ Pa were prepared onto polyethylene terephthalate (PET) using RF magnetron sputtering at room temperature. The structural, electrical and optical properties of the grown ITO films were investigated as a function of the oxygen partial pressure. The amorphous nature of the ITO films was dominant at the partial pressure below $1{\times}10^{-5}$ Pa and the degree of crystallinity increased as the oxygen concentration increased further. This structural change comes with the increased carrier concentration and reduction of the electrical resistivity down to $9.8{\times}10^{-4}{\Omega}{\cdot}cm$. The average transmittance (at 400~800 nm) of the ITO deposited on the PET substrates increased as the oxygen partial pressure increased and transmittance above 80 % was achieved with the partial pressure of $4{\times}10^{-5}$ Pa. The results show that the choice of optimal oxygen partial pressure can present improved film crystallinity, the increased carrier concentration, and the enhancement in the electrical conductivity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.993-994
• /
• 2008

Electrochromic (EC) devices are capable of reversibly changing their optical properties upon charge injection and extraction induced by the external voltage. The characteristics of the EC device, such as low power consumption, high coloration efficiency, and memory effects under open circuit status, make them suitable for use in a variety of applications including smart windows and electronic papers. Coloration due to reduction or oxidation of redox chromophores can be used for EC devices (e-paper), but the switching time is slow (second level). Recently, with increasing demand for the low cost, lightweight flat panel display with paper-like readability (electronic paper), an EC display technology based on dye-modified $TiO_2$ nanoparticle electrode was developed. A well known organic dye molecule, viologen, was adsorbed on the surface of a mesoporous $TiO_2$ nanoparticle film to form the EC electrode. On the other hand, ZnO is a wide bandgap II-VI semiconductor which has been applied in many fields such as UV lasers, field effect transistors and transparent conductors. The bandgap of the bulk ZnO is about 3.37 eV, which is close to that of the $TiO_2$ (3.4 eV). As a traditional transparent conductor, ZnO has excellent electron transport properties, even in ZnO nanoparticle films. In the past few years, one-dimension (1D) nanostructures of ZnO have attracted extensive research interest. In particular, 1D ZnO nanowires renders much better electron transportation capability by providing a direct conduction path for electron transport and greatly reducing the number of grain boundaries. These unique advantages make ZnO nanowires a promising matrix electrode for EC dye molecule loading. ZnO nanowires grow vertically from the substrate and form a dense array (Fig. 1). The ZnO nanowires show regular hexagonal cross section and the average diameter of the ZnO nanowires is about 100 nm. The cross-section image of the ZnO nanowires array (Fig. 1) indicates that the length of the ZnO nanowires is about $6\;{\mu}m$. From one on/off cycle of the ZnO EC cell (Fig. 2). We can see that, the switching time of a ZnO nanowire electrode EC cell with an active area of $1\;{\times}\;1\;cm^2$ is 170 ms and 142 ms for coloration and bleaching, respectively. The coloration and bleaching time is faster compared to the $TiO_2$ mesoporous EC devices with both coloration and bleaching time of about 250 ms for a device with an active area of $2.5\;cm^2$. With further optimization, it is possible that the response time can reach ten(s) of millisecond, i.e. capable of displaying video. Fig. 3 shows a prototype with two different transmittance states. It can be seen that good contrast was obtained. The retention was at least a few hours for these prototypes. Being an oxide, ZnO is oxidation resistant, i.e. it is more durable for field emission cathode. ZnO nanotetropods were also applied to realize the first prototype triode field emission device, making use of scattered surface-conduction electrons for field emission (Fig. 4). The device has a high efficiency (field emitted electron to total electron ratio) of about 60%. With this high efficiency, we were able to fabricate some prototype displays (Fig. 5 showing some alphanumerical symbols). ZnO tetrapods have four legs, which guarantees that there is one leg always pointing upward, even using screen printing method to fabricate the cathode.

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.410-416
• /
• 2015

Recently, a new $Y_2O_3$ coating deposited using the EB-PVD method has been developed for erosion resistant applications in fluorocarbon plasma environments. In this study, surface crack formation in the $Y_2O_3$ coating has been analyzed in terms of residual stress and elastic modulus. The coating, deposited on silicon substrate at temperatures higher than $600^{\circ}C$, showed itself to be sound, without surface cracks. When the residual stress of the coating was measured using the Stoney formula, it was found to be considerably lower than the value calculated using the elastic modulus and thermal expansion coefficient of bulk $Y_2O_3$. In addition, amorphous $SiO_2$ and crystalline $Al_2O_3$ coatings were similarly prepared and their residual stresses were compared to the calculated values. From nano-indentation measurement, the elastic modulus of the $Y_2O_3$ coating in the direction parallel to the coating surface was found to be lower than that in the normal direction. The lower modulus in the parallel direction was confirmed independently using the load-deflection curves of a micro-cantilever made of $Y_2O_3$ coating and from the average residual stress-temperature curve of the coated sample. The elastic modulus in these experiments was around 33 ~ 35 GPa, which is much lower than that of a sintered bulk sample. Thus, this low elastic modulus, which may come from the columnar feather-like structure of the coating, contributed to decreasing the average residual tensile stress. Finally, in terms of toughness and thermal cycling stability, the implications of the lowered elastic modulus are discussed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.9-14
• /
• 2009

The effects of post-annealing temperature on the optical and electrical properties of P-doped ZnO thin films grown on sapphire substrate have been investigated under oxygen ambient. The XRD shows that regardless of the post-annealing temperature, all P-doped ZnO thin films indicate the c-axis orientation. The results of hall effect measurements indicate the P-doped ZnO thin film annealed at $850^{\circ}C$ exhibits p-type behavior with hole concentration of $1.18{\times}1016cm^{-3}$ and hole mobility of $0.96cm^2/Vs$. The low-temperature (10K) Photoluminescence results reveal that the peak related to the neutral-acceptor exciton (A0X), free electrons to neutral acceptor (FA) and donor acceptor pair (DAP) at 3.351ev, 3.283eV and 3.201eV are observed in the films showing p-type behavior with acceptor. The optimization of deposition and post-annealing conditions will certainly make the P-doped ZnO thin films promising materials for the application to the next generation of optical devices.

• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.7-14
• /
• 1996

This experiment was carried out to investigate the growth and yield responses of hydroponically grown tomato as affected by the different substrates using perlite and mixtures with perlite. Substrates used in this experiment were perlite (fine and coarse granule), peatmoss, rice hull and carbonized rice hull. The results obtained were as follows ; The best results in terms of total fruit yield and average fruit weight obtained in the single treatment of perlite, followed by perlite mixture with rice hull and carbonized rice hull. Leaf area was also higher in the plots of perlite mixture and optimum mixing ratio of perlite, peatmoss and carbonized rice hull was determined as 5:3:2 by volume. The more the rice hull was added to the mixed substrates, the less in fruit production was observed. However, adding perlite to other substrates brought higher fruit yield. Single treatment of rice hull showed the lowest fruit yield but enhanced in soluble solids contents over 6.0 $^{\circ}$Brix at each cluster.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.7
• /
• pp.567-578
• /
• 2015

Single droplet-wall collision heat transfer characteristics on a heated plate above Leidenfrost temperature were experimentally investigated considering the effects of impact velocity. The collision characteristics of the droplet impinged on the heated wall and the changes in temperature distribution were simultaneously measured using synchronized high-speed video and infrared cameras. The surface heat flux distribution was obtained by solving the three-dimensional transient heat conduction equation for the heated substrate using the measured surface temperature data as the boundary condition for the collision surface. As the normal impact velocity increased, heat transfer effectiveness increased because of an increase in the maximum spreading diameter and a decrease in the vapor film thickness between the droplet and heated wall. For We < 30, droplets stably rebounded from a heated wall without breakup. However, the droplets broke up into small droplets for We > 30. The tendency of the heat transfer to increase with increasing impact velocity was degraded by the transition from the rebounding region to the breakup region; this was resulted from the reduction in the effective heat transfer area enlargement due to the breakup phenomenon.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.6
• /
• pp.297-304
• /
• 2001

Scrophularia buergeriana Misrule has been contaminated with various pathogens in condition of field and storage period. This study was carried out for production of multiple stress resistance plant containing disease resistance that CGST gene expressed in transgenic Scrophularia buergeriana Misrule genome. Glutathione S-Transferases (GSTs) detoxify endobiotic and xenobiotic compounds by covalent linking of tripeptide glutathione to hydrophobic substrate. GST enzymes have been identified and characterized in insects, bacteria, and many plant species. A cDNA clone of GST was introduced into Scrophularia buergeriana Miquel by transformation with Agrobacterium tumefaciences. In coporation of the CGST gene into S. buergeriana Misrule was confirmed by PCR analysis of genomic DNA. Influence of exposure to darkness on the regeneration potential and transformation frequence were assessed. The activity of GST in transgenic plants was two times higher than that of non-transgenic plants. As a result of anti-microbe assays, the crude extract protein of transgenic plants showed the antimicrobial effects higher than control plants.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.395-402
• /
• 1997

The $SiO_2$ films were prepared by ECR(electron cyclotron resonance) plasma diffusion method, Deal-Grove model and Wolters-Zegers-van Duynhoven model were used to estimate the oxidation rate which was correlated with surface morphology for different orientation of Si(100) and Si(111). It was seen the $SiO_2$ thickness increased linearly with initial oxidation time. But oxidation rate slightly decrease with oxidation time. It was also shown that the oxidation process was controlled by the diffusion of the reactive species through the oxide layer rather than by the reaction rate at the oxide interface. The similar time dependency has been observed for thermal and plasma oxidation of silicon. From D-G model and W-Z model, the oxidation rate of Si(111) was 1.13 times greater than Si(100) because Si(111) had higher diffusion and reaction rate, these models more closely fits the experimental data. The $SiO_2$ surface roughness was found to be uniform at experimental conditions without etching although oxidation rate was increased, and to be nonuniform due to etching at experimental condition with higher microwave power and closer substrate distance.

• Journal of Life Science
• /
• v.21 no.8
• /
• pp.1109-1119
• /
• 2011

In the present study, the pro-apoptotic effects of methanol extract of Prunus mume fruits (MEPM) in human leukemia U937 cells were investigated. It was found that exposure to MEPM resulted in growth inhibition in a concentration-dependent manner by inducing apoptosis. The induction of apoptotic cell death in U937 cells by MEPM was correlated with a down-regulation of inhibitor of apoptosis protein (IAP) family, such as X-linked inhibitor of apoptosis protein (XIAP) and survivin, anti-apoptotic Bcl-2, up-regulation of FasL and cleavage of Bid. MEPM treatment also induced the proteolytic activation of caspase-3, caspase-8 and caspase-9, and degradation of caspase-3 substrate proteins, such as poly (ADP-ribose) polymerase (PARP) and ${\beta}$-catenin. In addition, apoptotic cell death induced by MEPM was significantly inhibited by z-DEVD-fmk, a caspase-3 specific inhibitor, which demonstrates the important role of caspase-3 in the apoptotic process by MEPM in U937 cells. Taken together, these findings suggest that P. mume extracts may be a potential chemotherapeutic agent for the control of human leukemia cells and further studies will be needed to identify the active compounds.