• KSBB Journal
• /
• v.16 no.3
• /
• pp.307-313
• /
• 2001

The effects of agitaion and aeration on mycelial growth, exo-polysaccharide (EPS) production, and substrate consumption upon the submerged cultivation of G. lucidum were investigated, and the batch kinetics of the EPS fermentation of G. lucidum were interpreted as function of agitation speed and aeration rate. In a 2.6 L jar fermenter system, the optimum agitation speed and aeration rate for EPS production were determined to be 400 rpm and 1.0 vvm, respectively. The maximum production of EPS obtained was 15 g/L. The logistic model for mycelial growth fitted the experimental data better than that determined by the Monod and the two-thirds power models. The Luedeking-Piret equation adequately modelled the kinetic data obtained for product and substrate.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.247-247
• /
• 2006

Chemical and physical synthesis routes were combined to prepare macroporous thin films of semiconducting metal-oxides such as $CaCu_{3}Ti_{4}O_{12}\;and\;TiO_{2}$ by sputtering onto (PMMA) microsphere templated substrates. Subsequently, the colloidal templates were removed by thermal decomposition. The remaining inorganic films comprised a monolayer of hollow hemispheres with diameter commensurate with that of the microspheres. This unique morphology increases the surface area and reduces the interfacial area between film and substrate. Consequently, the surface activity is markedly enhanced while deleterious interfacial effects between film and substrate are significantly reduced. Both effects are highly advantageous for gas sensing applications.

• Journal of the Korean Ceramic Society
• /
• v.30 no.7
• /
• pp.578-588
• /
• 1993

Highly c-axis oriented ferroelectric PbTiO3 thin films were deposited on MgO single crystal substrates by RF magnetron sputtering. We have studied the effects of substrate temperature, RF input power, gas comosition, gas pressure and deposition rate on the chemical and structural characteristics of PbTiO3 thin films. The epitaxy relationship of c-axis oriented films was found to be PbTiO3{100}//MgO(100) and their microstructures were highly mosaic. It was found that the most important parameter to achieve epitaxial PbTiO3 films was the substrate temperature. The activation energy for the epitaxy formation was about 0.92eV. Lower gas pressure and RF input power were favorable for the formation of epitaxial c-axis orientation. It was also found that the optimum oxygen content in Ar gas was 10% to obtain the stoichiometric PbTiO3 composition.

• Journal of Information Display
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2012

Decreasing the thermal resistance is the critical issue for high-brightness light-emitting diodes. In this paper, the effects of some design factors, such as chip size (24 and 35 mil), substrate material (AlN and high-temperature co-fired ceramic), and die-attach material (Ag epoxy and PbSn solder), on the thermal-dissipation characteristics were investigated. Using the thermal transient method, the temperature sensitivity parameter, $R_{th}$ (thermal resistance), and junction temperature were estimated. The 35-mil chip showed better thermal dissipation, leading to lower thermal resistance and lower junction temperature, owing to its smaller heat source density compared with that of the 24-mil chip. By adopting an AlN substrate and a PbSn solder, which have higher thermal conductivity, the thermal resistance of the 24-mil chip can be decreased and can be made the same as that of the 35-mil chip.

• Carbon letters
• /
• v.5 no.4
• /
• pp.191-196
• /
• 2004

The electrochemical removal (ECR) of water pollutants by activated carbon fiber (ACF) electrodes from wastewater was investigated over wide range of electrochemical reaction time. The ECR capacities of ACF electrodes were associated with their internal porosity and were related to physical properties and to reaction time. And, surface morphologies and elemental analysis for the ACFs after electrochemical reaction are investigated by SEM and EDX to explain the changes in adsorption properties. The FT-IR spectra of ACFs for the investigation of functional groups show that the electrochemical treatment is consequently associated with the homogeneous removal of pollutants with the increasing surface reactivity of the activated carbon fiber surfaces. The ACFs were electrochemically reacted to waste water to investigate the removal efficiency for the COD, T-N and T-P. From these removal results of pollutants using ACFs substrate, satisfactory removal performance was obtained. The outstanding removal effects of the ACFs substrate were determined by the properties of the material for adsorption and trapping of organics, and catalytic effects.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.258-258
• /
• 2010

In this work, back bias effects in the program of the silicon-oxide-nitride-oxide-silicon (SONOS) cell using two-step pulse sequence, are investigated. Two-step pulse sequence is composed of the forward biases for collecting the electrons at the substrate terminal and back bias for injecting the hot electrons into the nitride layer. With an aid of the back bias for electron injection, we obtain a program time as short as 600 ns and an ultra low-voltage operation with a substrate voltage of -3 V.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.3
• /
• pp.210-224
• /
• 2006

A new analytical model for the static I-V characteristics of GaAs MESFET’s under optically controlled conditions in both linear and saturation region is presented in this paper. The novelty of the model lies in characterizing both photovoltaic (external, internal) and photoconductive effects. Deep level traps in the semi insulating GaAs substrate are also included in this model. Finally, effect of backgate voltage on I-V characteristics is explained analytically for the first time in literature. Small signal parameters of GaAs MESFET are derived under both dark and illuminated conditions. Some of the results are compared with reported experimental results to show the validity of the proposed model. Since accurate dc modeling is the key to accurate ac modeling, this model is very useful in the designing of photonic MMIC’s and OEIC’s using GaAs MESFET.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.1
• /
• pp.61-65
• /
• 2012

In this study, for use of carbon nanotubes (CNTs) as a cold cathode of x-ray tubes, we examine the effects of selective growth of CNTs on their field emission properties and long-term stability. The selective growth of CNTs was performed by selectively etching the catalyst layer which was used for CNTs' nucleation. CNTs were grown on conical-type tungsten substrates using an inductively-coupled plasma chemical vapor deposition system. For all the grown CNTs, their morphologies and microstructures were analyzed by field-emission scanning electron microscope and Raman spectroscopy. The electron-emission properties of CNTs and the long-term stability of emission currents were measured and characterized according to the CNTs' growth position on the substrate.

• Transactions of Materials Processing
• /
• v.9 no.2
• /
• pp.103-111
• /
• 2000

It is necessary to improve mechanical and optical properties in the optical disk substrates as the information storage density using short wavelength laser are being developed. The birefringence distribution is regarded as one of the most important optical properties for optical disk. In the present study, the birefringence distrubution is calculated using the Leonov model for viscoelastic constitutive equations and Cross/WLF model for viscosity approximation. The effects of processing conditions upon the development of birefringence discosity approximation. The effects of processing conditions upon the development of birefringence distribution in the optical disk were examined theoretically. It was found that the values of the birefringence distributions were very sensitive to the mold wall temperature history which minimizes the birefringence distribution. The analytical results showed the possibility of improving mechanical and optical properties in the optical disk substrates by active control of the mold wall temperature history.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.137-140
• /
• 2011

The aminolysis reactions of phenyl N-benzyl thiocarbamate with benzylamines in acetonitrile at $50.0^{\circ}C$ are investigated. The reactions are first order in both the amine and the substrate. Under amine excess, pseudo-first coefficient ($k_{obs}$) are obtained, plot of $k_{obs}$ vs free amine concentration are linear. The signs of ${\rho}_{XZ}$ (< 0) are consistent with concerted mechanism. Moreover, the variations of $\rho_X$ and $\rho_Z$ with respect to the sustituent in the substrate and large ${\rho}_{XZ}$ value indicate that the reactions proceed concerted mechanism. The normal kinetic isotope effects ($k_H/k_D$ = 1.3 ~ 1.5) involving deuterated benzylamine nucleophiles suggest a hydrogen-bonded, four-centered-type transition state. The activation parameters, ${\Delta}H^\ddagger$ and ${\Delta}S^\ddagger$, are consistent with this transition state structure.