• Imaging Science in Dentistry
• /
• v.41 no.2
• /
• pp.63-69
• /
• 2011

Purpose : The purpose of this study was to evaluate a new technique for localizing impacted mesiodens using its horizontal magnification ratio on panoramic radiographs. Materials and Methods : Location-magnification equation of a panoramic equipment was obtained from horizontal magnification ratio of a metal ball which was located variable positions from the center of image layer at interval of 2 mm. Panoramic radiographs were obtained from a skull phantom with a metal ball which was a substitute for impacted mesiodens and was embedded 10mm(Group 1), 15mm(Group 2), and 20mm(Group 3) posterior to the central incisor. Each group obtained 7 panoramic radiographs at variable positions and one periapical radiograph. Three methods were used to estimate the actual width of the incisors and the balls which were used to calculate the magnification ratio. The methods included using the actual incisor width and the calculated ball width (Method 1), using the actual incisor width and the ball widths measured on periapical radiograph (Method 2), and using the incisor and the ball widths measured on periapical radiograph (Method 3). The location of the metal ball was calculated by using the location-magnification equation. Results : The smallest difference between the calculated and the actual distance was $0.1{\pm}0.7 \;mm$ in Group 1/ Method 3. The largest difference was $-4.2{\pm}1.6 \;mm$ in Group 3/Method 2. In all groups, method 3 was the most accurate. Conclusion : Quantitative localization of impacted mesiodens is possible by using panoramic radiograph.

• Investigative Magnetic Resonance Imaging
• /
• v.3 no.1
• /
• pp.73-77
• /
• 1999

Purpose : The purpose of the study was to evaluate the sensitivity and specificity of proton-weighted fast spin-echo MR imaging in diagnosing the meniscal tear of knee as an reasonable substitute for conventional spin-echo imaging. Materials and Methods : 102 consecutive patients, proved by surgery, proved by surgery, were participated in this study. All of them were suspected internal derangement of knee, examined by fast spin-echo MR imaging including sagittal and coronal images on a 1.5T MR imager and underwent arthroscopic or open surgery of knee joint within 2 months. These images were reviewed retrospectively by three radiologists. The sensitivity and specificity of meniscal tear were calculated. Results : The sensitivity and specificity of meniscal tear using proton-weighted fast spin-echo MR imaging were 94%, 93% inmedialmeniscus and 92%, 88% in lateral meniscus. Conclusion : The sensitivity and specificity of meniscal tear using proton weighted fast-spin echo MR images were as high as those using conventional spin-echo images. The proton-weighted fast-spin echo MR imaging can be an alternative to conventional spin-echo MR imaging in diagnosing meniscal tear of the knee.

• Journal of Korean Society of societal Security
• /
• v.3 no.2
• /
• pp.41-46
• /
• 2010

This study focuses on two points. First, I have examined the difference on combustion between flame-retardant and non flame-retardant products including vertical blinds and roll screens that are widely used as a substitute for fabric curtains. The second point is to see how long flame-retardant goods can be durable, that is, flame retardant durability after washing in liquid. the experiment on the flame-retardant ability before and after washing of vertical blinds and roll screens that have been used for a long time in fire protection construct. Comparing and analyzing domestic and foreign laws on flame-retardant after the experiment on durability of these products. I aim to draw necessity for increased application of internal laws and regulations on flame-retardant and show how to improve the point at issue. According to the result, clear differences in performance and safety were observed between flame-retardant and non flame-retardant products. flame-retardant materials can prevent things from fire spread without igniting but melting when they've met flame and burnt, In contrast, non flame-retardant material for experiment which size is 120cm long takes less than 3 minutes only to be completely destroyed by fire. However, it was expected for flame-retardant durability of flame-retardant blinds which are not washable to decrease flame-retardant durability after being washed with water, there was no sharp difference. so it is demonstrated that flame-retardant blinds can keep flame-retardant durability. accordingly through the strict course of product we are concerned about keeping durability.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.33-41
• /
• 2011

To substitute TLS in the hybrid system which is combined with Sagnac interferometer and fiber bragg grating (FBG) it is necessary to investigate how the laser source (TLS and CW) and sensor material variate the response of fiber optic sensor. Two different hollow cylinder type mandrel materials are proposed which are PTFE and PTFE+carbon and 18 m optical fiber is wounded at the mandrel surface. CW laser source experiments had been done in the oil tank which is filled with transformer oil in the 1 kHz~20 kHz frequency range. Also Sagnac interferometer fiber optic sensor is combined with FBG called hybrid system and TLS used as a light source. Based on the experimental results PTFE sensor showed more higher magnitude of detection signal rather than carbon sensor and this result is agreement with the McMahon's theoretical results. Phase variation is inversely proportional to the elastic modulus of the mandrel material. In PTFE fiber sensor, tunable laser source showed more higher performance rather than CW case. Therefore, TLS fiber optic sensor can be applied to the hybrid system which is combined with Sagnac and FBG.

• The Korean Journal of Air & Space Law and Policy
• /
• v.25 no.2
• /
• pp.79-112
• /
• 2010

The Beijing Convention of 2010 taken together effectively establishes a new broader and stronger civil aviation security framework. This adoption would significantly advance cooperation in prevent of the full range of unlawful acting relation to civil aviation and the prosecution and punishment of offenders. First, the Beijing Convention of 2010 will require parties to criminalize a number of new and emerging threats to the safety of civil aviation, including using aircraft as a weapon and organizing, directing and financing acts of terrorism. These new treaties reflect the international community's shared effort to prevent acts of terrorism against civil aviation and to prosecute and punish those who would commit them. Second, this convention will also require States to criminalize the transport of biological, chemical, nuclear weapons and related material. These provisions reflect the nexus between non-proliferation and terrorism and ensure that the international community will act to combat both. Third, this Convention shall not apply to aircraft used in military, customs or police services. As a substitute, International Humanitarian Law will be applied in a case. Moreover, the National Jurisdiction and the application of the law will be extended farther. The treaty promotes cooperation between States while emphasizing the human rights and fair treatment of terrorist suspects.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.172-172
• /
• 2011

Anaerobic digestion(AD) has successfully been used for many applications that have conclusively demonstrated its ability to recycle biogenic wastes. AD has been successfully applied in industrial waste water treatment, stabilsation of sewage sludge, landfill management and recycling of biowaste and agricultural wastes as manure, energy crops. During AD, i.e. organic materials are decomposed by anaerobic forming bacteria and fina1ly converted to excellent fertilizer and biogas which is primarily composed of methane(CH4) and carbon dioxide(CO2) with smaller amounts of hydrogen sulfide(H2S) and ammonia(NH3), trace gases such as hydrogen(H2), nitrogen(N2), carbon monoxide(CO), oxygen(O2) and contain dust particles and siloxanes. The production and utilisation of biogas has several environmental advantages such as i)a renewable energy source, ii)reduction the release of methane to the atomsphere, iii)use as a substitute for fossil fuels. In utilisation of biogas, most of biogas produced from small scale plant e.g. farm-scale AD plant are used to provide as energy source for cooking and lighting, in most of the industrialised countries for energy recovery, environmental and safety reasons are used in combined heat and power(CHP) engines or as a supplement to natural. In particular, biogas to use as vehicle fuel or for grid injection there different biogas treatment steps are necessary, it is important to have a high energy content in biogas with biogas purification and upgrading. The energy content of biogas is in direct proportion to the methane content and by removing trace gases and carbon dioxide in the purification and upgrading process the energy content of biogas in increased. The process of purification and upgrading biogas generates new possibilities for its use since it can then replace natural gas, which is used extensively in many countries, However, those technologies add to the costs of biogas production. It is important to have an optimized purification and upgrading process in terms of low energy consumption and high efficiency giving high methane content in the upgraded gas. A number of technologies for purification and upgrading of biogas have been developed to use as a vehicle fuel or grid injection during the passed twenty years, and several technologies exist today and they are continually being improved. The biomethane which is produced from the purification and the upgrading process of biogas has gained increased attention due to rising oil and natural gas prices and increasing targets for renewable fuel quotes in many countries. New plants are continually being built and the number of biomethane plants was around 100 in 2009.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.420-426
• /
• 1996

We previously reported 344 cases of esophageal reconstruction for caustic esophageal stricture between 1959 and 1982, and this is the second report of 69 cases during 12 year period from Jan. 1983 to Feb. 1995. There were 32 males and 37 females, ranging in age from 4 to 65 years(mean 36.4 years). Caustic materials were acid in 37 (53.7%) and alkali in 31 (44.9%). All cases underwent colon interposition without esophageal resection except 3 cases of cancer complication which were resected through thoracotomy. In 64 cases isoperistaltic right colon with teminal ileum interposition were performed, and 5 cases were interposed with left colon either isoperistaltic (2 cases) or antiperistaltic (3 cases) method. Anastomotic leakage was the most frequently encountered c mplication (14.4%, 10 cases), and they were 11.6%(8 cases) from cervical, 2.8% (2 cases) from ileocolostoma. Overall operative mortality was 2.9% (2169), main causes of death were sepsis due to graft necrosis and mediastinitis. During 6 months to 12years (mean 2.Syears) follow-up of survived 67 cases, 88.1% (59 cases) ate normally, 7.5% (5 cases) complained of moderate dysphagia (eating liquid diet), and 4.5% (3 cases) were unable to eat by mouth. In our experience, reconstruction of the esphagus with the colon is a satisfactory method that can be accomplished with acceptable morbidity and mortality. The right colon is a durable and functional esophageal substitute.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.1
• /
• pp.51-58
• /
• 1998

Purpose : The purpose of this study was to compare the postoperative success and stability of arthroscopically assisted anterior cruciate ligament(ACL) reconstructions using the central one third bone patellar tendon bone(BPB) autograft versus a quadrupled semitendinosus/gracilis(ST) autograft in patients with "isolated" ACL tears. Materials & Methods : A strict criteria to identify isolated ACL tears was used which included : no previous surgery, no other ligamentous injury, no history of patellofemoral symptoms, no patellofemoral malalignment, no meniscal pathology, no chondromalacia or chondral injury and no limitation of motion of the injured knee. 30 patients (15 BPB, 15 ST) with a mean age of 27.4 years were available for a mean follow up of 18 months (between 12 months and 26 months). Preoperatively, there was no significant difference between the two groups with respect to age, sex and degree of laxity. Results : Postoperatively, we couldn't find significant differences between the two groups with respect to subjective Lysholm score, objective laxity including Lachman test, pivot shift test and KT-2000 measurements. Mean side to side difference of KT-2000 scores at 20lbs were 1.5mm for the BPB group and 1.4mm for the ST group. Positive Lachman test was found in 26.7% and 33.3% and positive pivot shift was found in 20% and 33.3% of the patients in the BPB and ST groups, respectively. Anterior knee pain (33.3%) was more common in the BPB group. There were 80% of the patients in both groups above nearly normal grade according to the IKDC grade. Conclusions : In patients with "isolated" ACL tears, the overall results, ligamentous stability for the patellar tendon and the quadrupled semitendinosus/gracilis were comparable. We consider that the quadrupled autogenous hamstring tendon is a good alternative substitute in ACL reconstruction together with the bone patellar tendon bone.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.650-656
• /
• 2018

The TFT-LCD industry is a kind of large-scale industrial Giant Microelectronics device industry and has a similar semiconductor process technology. Wet etching forms a relatively large proportion of the entire TFT process, but the number of published research papers on this topic is limited. The main reason for this is that the components of the etchant, in which the reaction takes place, are confidential and rarely publicized. Aluminum (Al) and copper (Cu), which have been used in recent years for the manufacture of large area LCDs, are very difficult materials to process using wet etching. Cu, a low-resistance material, can only be used in the wet etching process, and is used as a substitute for Al due to its high speed etching, low failure rate, and low power consumption. Further, the abnormal reaction of hydrogen peroxide ($H_2O_2$), which is used as an etching solution, requires additional piping and electrical safety devices. This paper proposes a method of minimizing the damage to the plant in the case of adverse reactions, though it cannot limit the adverse reaction of hydrogen peroxide. In recent years, there have been many cases in which aluminum etching equipment has been changed to copper. This paper presents a countermeasure against abnormal reactions by implementing safety PLC with a high safety grade.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.6
• /
• pp.491-497
• /
• 2001

Polymethylmethacrylate(PMMA) is currently commonly used material for the reconstruction of bone defects and fixation of joint prosthetics following congenital and acquired causes. Although PMMA has widespread use, it does not possess the ideal mechanical characteristics with osteoconductivity and osteoinductivity required. In order to overcome these problem, addition of bovine bone drived defatting demineralized bone(BDB) powders to a PMMA bone cement was done for improvement of physical property and bone forming characteristics of composite. In order to investigate the influence of BDB reinforcement on the PMMA, we measured physical property of compressive, tensile, flexural strength, and scanning electron microscopic examinations. The results were obtained as follows: 1. The PMMA forms a solid cellular matrix with open cells about $100{\mu}m$ in variable size and incorporating BDB. BDB aggregates inside the cells form a porous network that is accessible from the outer surface. 2. The physical properties were compressive strength of mean $22.74{\pm}1.69MPa$, tensile strength of mean $22.74{\pm}1.69MPa$, flexural strength of mean $77.53{\pm}6.93MPa$. Scanning electron microscopic examinations were revealed that there was DBD particles form a highly porous agglomerates. BDB can be added PMMA in the form of dried powders, the composites are applicable as bone substitutes. BDB and PMMA mixture is shown to produce a class of composites that due to their microstructure and improved mechanical properties may be suitable for application as bone subsitutes. The mechanical and material properties of the BDB-PMMA bone substitute composites are competitive with those properties of a porous ceramic matrix of other hydroxyapatite and with those of natural bones.