• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.11
• /
• pp.1696-1706
• /
• 2009

Nonwoven fabrics have been widely used in various fields that include household, industrial, agricultural, medical goods, especially in the automobile industry. In this study, eco-friendly fiber materials were developed and investigated as a substitute material for polyester fibers in nonwovens. To make plant fiber bundles, stems of Indian mallow (IM), and Kuzu vine (KV) were retted; in addition, the non-cellulose component was partially removed. Plant fiber bundles and polyester fibers (P) were blended and needle punched to produce nonwovens. Five kinds of nonwovens were manufactured: P100 (Polyester 100%), IM10 (IM 10% and Polyester 90%), IM20 (IM 20% and Polyester 80%), KV10 (KV 10% and Polyester 90%), and KV20 (KV 20% and Polyester 80%). The color values, surface appearance, tensile strength, elongation, tear strength, abrasion strength, flexstiffness, moisture regain, water or oil absorbency, and static electricity of manufactured nonwovens are investigated. As the blended ratios of IM or KV increased, the brightness of nonwovens decreased compared to that of polyester 100%. Tensile strength, tear strength, abrasion strength, and flexstiffness of IM10 as well as KV10 were higher than those of P100, IM20, and KV20, resulting from the influence of the structure and properties of nonwoven fibers. Moisture regain and water or oil absorbency increased, while static electricity decreased in proportion to the amount of plant fibers. IM or KV and polyester blended nonwovens showed improved properties over P100 that could be substituted for P100 as a novel material for textiles.

• Clinics in Shoulder and Elbow
• /
• v.7 no.2
• /
• pp.65-69
• /
• 2004

Purpose: The purpose of this study is to evaluate the short-term clinical outcome of the capsulolabral repair using absorbable suture anchor in traumatic anterior instability of shoulder. Materials and Methods: From June 2000 to September 2001, 15 shoulders with recurrent anterior instability were operated with arthroscopic Bankart repair using absorbable suture-anchor 'PANALOK' (Mitek, westwood, MA), and were followed up over 1 year (average; 13 months). The mean age was 23-years. There were fourteen males and one female. The mean duration from the initial symptoms to the operation was 24 months. Associated pathologies were Hill-Sachs defect in 12 cases, SLAP in 6 cases, and partial rotator cuff tear in 2 cases. The results were evaluated by patien's satisfaction, Modified Rowe Score in regard to joint stability, mobility, pain and function in comparison with the preoperative ones, and other complications. Results: At the last follow-up, the total Rowe Score increased from 38 points to 92 points. There were no recurrence and 14 patients among 15 patients gained pre-operative level of sports activity and no other complications. Conclusion: Effective capsulolabral repair could be obtained by the absorbable anchoring without any untoward complications. This procedure is simple and safe one and this system can be a good substitute for the metallic anchor.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.2
• /
• pp.11-20
• /
• 2009

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing the design parameter for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 21 kinds of the laboratory model tests with the end restraint conditions of the reinforcement that comprises the constrained and partially constrained (3 types) conditions were conducted. Moreover, a new procedure was proposed to take into account the effect of the stiffness of Reinforce materials on bearing capacity theory of Surface Reinforcement Method for Soft Ground.

• Composites Research
• /
• v.27 no.6
• /
• pp.254-259
• /
• 2014

In this study, a device and pressure press process that is able to substitute autoclave process is developed. This process complements disadvantages of autoclave process which are long process-time and high production cost. The developed device provides air pressure as well as the vacuum which are greatest feature of autoclave process. The device is sealed using hydraulic pressure to keep the air pressure inside the mold. The transfer of the heat is designed to be direct. The heating and pressure charging time are decreased by reducing the interior space. Tooling cost is reduced dramatically compared to autoclave process. Spring-back phenomenon is measured and compared. The temperatures of several parts of the mold during molding are measured. The fiber volume fraction of the parts molded by autoclave process and by the developed process are compared.

• Journal of Oral Medicine and Pain
• /
• v.39 no.3
• /
• pp.90-95
• /
• 2014

Purpose: To investigate viscosity and wettability of hyaluronic acid (HA) solutions according to supplementation of lysozyme and/or peroxidase, and different ionic strength and pH conditions. Methods: Solutions containing HA were prepared using distilled deionized water (DDW) and simulated salivary buffer (SSB) in different conditions. Different concentrations of hen egg-white lysozyme and bovine lactoperoxidase was added into HA solutions. HA solutions with antimicrobials in different ionic strength and pH conditions were prepared. Viscosity was measured using cone-and-plate digital viscometer at six different shear rates and wettability on acrylic resin and Co-Cr alloy was determined by contact angle. Results: The viscosity values of HA dissolved in DDW were decreased in order of HA, HA containing lysozyme, HA containing peroxidase, and HA containing lysozyme and peroxidase. The viscosity values for HA in DDW were decreased as the concentration of lysozyme and/or peroxidase increased. However, the viscosity values for HA in SSB showed no significant changes according to the concentration of lysozyme and/or peroxidase. The viscosity values of HA solutions were inversely proportional to ionic strength and pH. The contact angle of HA solutions showed no significant differences according to tested surface materials, addition of lysozyme and/or peroxidase, and different ionic strength and pH conditions. Contact angles on acrylic resin by HA solutions in all tested conditions were much higher than those by human saliva. Conclusions: The rheological properties of HA supplemented with lysozyme and/or peroxidase in different ionic strength and pH conditions were objectively confirmed, indicating the possibility of HA with lysozyme and/or peroxidase as main components in the development of effective saliva substitutes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.83-86
• /
• 2008

The concrete used most in construction materials. There is an overcrowded iron dimensions use of the concrete at time of the other concrete theory on the reinforcing rod back which did congestion and compares it with this, and there are more few dimensions of the aggregate than concrete, and quantity of aggregate passage is superior in mortar than concrete. If a volume rate of the aggregate writes mortar than concrete against this, therefore, unit amount increases, and quantity of paste increases and quantity of dry shrinkage than increase concrete. However, I let I regulate lay priest distribution of the aggregate, and the results rates increase and reduce unit amount and decrease quantity of dry shrinkage, and separation resistance and the gap passage characteristics are judged because it can be it in a substitute document of very superior concrete. I came to carry out the study that I watched to let I was useful a little more and do the improvement repair of a become building wall body, a basement pillar and repair reinforcement of the assistant in the reinforcing rod back, the old age when I made congestion here. I regulated lay priest distribution of the aggregate in the study and regulated substitution rate of the aggregate (40%, 50%, 60%) and divided W/C 30%, 40% standards and produced mortar and I compared quantity of air by this, slump, compression robbery and showed it this time.

• The Korean Journal of Community Living Science
• /
• v.20 no.3
• /
• pp.449-460
• /
• 2009

This study was performed to investigate gruel intake, preference and opinions about gruel development to produce new products for breakfast. The subjects of this study were 307 adults in Chungju city. People who favored gruels were 212(69.5%) and 50.2% of the subjects liked the gruel because of good digestion and absorption. They liked midium thick or thin gruel and also liked grain granules with some stuff as contents. The gruels often taken were abalone gruel(45.9%), pumpkin gruel(41.7%), chicken gruel(34.9%), vegetable gruel(33.6%), beef and mushroom gruel(30.3%) etc. in order. The frequency of gruel intake was 1-2 times/year and 59.6% of subjects got gruels from the special gruel restaurant. People who need gruels most were patients, indigestible person, the elderly, weaning babies, workers and students missing breakfast in order. Sesame taste obtained the highest score of all, that of bitter taste was significantly higher in over fifty year old people (p<0.05), and hot taste score was significantly higher in 30-40 year old people (p<0.01). The gruels preferred most were abalone gruel, pumpkin gruel, chicken gruel, beef and mushroom gruel, vegetable gruel, red bean gruel, pine nut gruel, egg gruel, sesame gruel, plain grain gruel etc. in order. Fifty seven percent of subjects wanted to develope new gruels fortified nutrients. In conclusion, when the substitute gruel for breakfast is developed, it is better to use food materials to be easy to digest, to have grain granules with some stuff inside and to be sesame taste.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.13-20
• /
• 2006

Alginate, which is isolated from brown seaweed, is a bioabsorbable long chain polysaccharides, ${\beta}$-D-mannuronic acid and ${\alpha}$-L-guluronic acid. The authors produced alginates and alginate-colllagen as a disc form. Then, to evaluate the efficacy of alginate and alginate-collagen complex as a wound healing material, three full-thickness skin defects of 2 cm in diameter were made at the back of the New Zealand white rabbits. Three groups of dressing materials-alginate, alginate-collagen complex and vaseline gauze as control group - were applied on the wound and the results were evaluated grossly and histopathologically. The authors compared gross findings of sizes of healed wound, wound epithelization and wound contraction by tracing the remaining wound area at 5th, 10th, 15th, 20th, 25th day after wound introduction, and wound biopsy was performed at 3rd, 7th, 14th, 21st day, respectively. Alginate and alginate-collagen complex showed statistically higher percentage of wound contraction and wound healing compared to control group(p<0.05). Alginate-collagen complex showed statistically higher percentage of wound contraction, epithelization and wound healing compared to alginate alone. In conclusion, the result suggests that alginate has a good effect of wound healing and that alginate-collagen complex is more effective in wound healing than alginate alone.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.6
• /
• pp.1018-1023
• /
• 2012

In order to substitute and recycle the existing automobile parts for GMT-sheet, researches on the effects of GMT-sheet on the establishment of precise joining strength, joining condition that are lap length of joining part, compression ratio, and closure speed must be carried out but until now. Besides, many researches on adhesion joint had been conducted until now but no systematic research on press lap joint of GMT-sheet has been implemented until recently and the reliability of joining strength is not yet established. In press lap joining molding of GMT-sheet, tensile stress and lap joining connection efficiency was increased according to the increase of lap length L. However, as the increase of compression ratio and fiber content ratio per unit area was higher in tensile test, it has caused the deterioration of lap joining efficiency after joining molding of GMT-sheet. Clarify joining strength and lap joining efficiency during high temperature compression press lap joining molding of GMT-sheet and research data regarding to the lap length of joining part was presented. The purpose of this study is to contribute to the substitution of existing products as well as usage development in non-automobile field and also to find out precise dynamic characteristics as designing data of structures.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.6
• /
• pp.334-339
• /
• 2005

Although phosphogypsum can have profound effects on both the physical and chemical properties of certain soils with supplying the essential elements, no widespread use of by-product phosphogypsum will be made unless such uses pose no threat to the public health and soil contaminations. This study was conducted to evaluate the effects of phosphogypsum on the growth of oriental melon and soil properties in plastic film house. Phosphogypsum was treated at the rate of $70kg\;CaO\;10a^{-1}$ and the effects were compared with the treatment of Ca-Mg carbonate. In the treatment of phosphogypsum, early growth of oriental melon was significantly increased comparing to the growth in the Ca-Mg carbonate treatment. Total fruit yield was not different between the treatments of phosphogypsum and Ca-Mg carbonate, but marketable fruit yield was higher in the phosphogypsum treatment. Although Ca and S contents in oriental melon were increased in the phosphogypsum treatment, contents of toxic heavy metals including As, Cd, Cr, Cu, and Pb were not different between the two treatments. Also, soil pH and contents of extractable toxic metals in the soil were not significantly different between the two treatments after the experiment. These results suggest that phosphogypsum can be a valuable substitute for lime materials in high pH soils of plastic film house.