• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.772-775
• /
• 1992

It is necessary to estimate hydrodynamic coefficients to design the auto-pilot system and motion simulator of submersible vehicle. In this paper, an algorithm was designed to estimate hydrodynamic coefficients of submersible vehicle. Using this algorithm, the hydrodynamic coefficients were estimated from measurements of full scale trial. The estimated hydrodynamic coefficients were used for the design of an auto-depth controller(ADC) of submersible vehicle, and the resulting ADC are proved to have a better performance than the previous one.

• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.661-667
• /
• 2010

This paper presents a failure diagnosis and accommodation strategy which is capable of tolerating faulty actuators of a submersible vehicle. The proposed method is mainly based on a sliding mode control technique. The primary ideas include a performance index to describe the effectiveness of actuators, and a controller reconfiguration strategy using the actuator effectiveness index. The actuator effectiveness proposed in this work is defined as the relationship between the sliding surface and the controlled system behavior. The resulting actuator effectiveness is then used in reconfiguring the controller in order to counteract for the deteriorated control performance in the presence of a faulty actuator. The effectiveness of the proposed method is demonstrated by means of numerical simulations with a submersible vehicle.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.850-860
• /
• 1996

This paper considers a sliding mode controller for a depth and course control of a class of submersible Vehicles. Since the vehicle used here shows complex dynamic characteristics sensitive to speed variation and buoyancy, robustness in control of vertical and horizontal plane motions of the vehicle is achieved by using the sliding mode controller of which a structure varies according to a pre-designed principle, so called the variable structure control. To compare this controller with another in robustness, PID controller for the same model of vehicle is designed. From various simulations for two controllers, it is shown that the sliding mode controller is the more robust anainst to modeling errors and disturbances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.776-779
• /
• 1992

This paper describes the auto-depth control system with depth control tank for low speed submersible vehicle that can be used for both near surface and deeply submerged keeping operations. The PDA control algorithm is used to design controller and adaptive notch filter is designed to eliminate the dominant frequency of seaway. The computer simulations demonstrate the excellent depth keeping performance of the controller under seaway effects.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권2호
• /
• pp.409-425
• /
• 2015

In this paper, we employ a dynamics modeling method for investigating a multi-body dynamics system of semi-submersible autonomous underwater vehicles consisting of a towing vehicle operated near the water surface, a tow cable, and a towfish. The towfish, which is towed by a marine cable for the purposes of exploration or mine hunting, is modeled with a Six-Degree-of-Freedom (6-DOF) equation of motion that reflects its hydrodynamics characteristics. The towing cable, which can experience large displacements and deformations, is modeled using an absolute nodal coordinate formulation. To reflect the hydrodynamic characteristics of the cable during motion, the hydrodynamic force due to added mass and the drag force are imposed. To verify the completeness of the modeling, a few simple numerical simulations were conducted, and the results confirm the physical plausibility of the model.

• 대한임베디드공학회논문지
• /
• 제13권2호
• /
• pp.65-71
• /
• 2018

In order to make the underwater vehicle carry out the mission in a submarine environment, it is needed to plan a safe and efficient route to a given destination and prevent the autonomous submersible from colliding with obstacles while moving along the planned route. The function of collision avoidance makes the travel distance of the autonomous submersible longer. Moreover, it should move slowly near to obstacles against their moving disturbance. As a result, this invokes the degradation of the navigation efficiency in the process of collision avoidance. The side effect of the collision avoidance is not ignorable in the case of high congested environments such as the coast with many obstacles. In this paper, we suggest a path planning method which provides the route with minimum travel time considering collision avoidance in congested environment. For the purpose, we define environmental congestion map related to geometric information and obstacles. And we propose a method to consider the moving cost in the RRT scheme that provides the existing minimum distance path. We verified that the efficiency of our algorithm with simulation experiments.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.389-394
• /
• 2018

Remotely operated vehicle(ROV) and autonomous underwater vehicle(AUV) have been used for underwater surveys, underwater exploration, resource harvesting, offshore plant maintenance and repair, and underwater construction. It is hard for people to work in the deep sea. Therefore, we need a vision control system of underwater submersible that can replace human eyes. However, many people have difficulty in developing a deep-sea image control system due to the deep sea special environment such as high pressure, brine, waterproofing and communication. In this paper, we will develop an Ethernet based remote image control system that can control the image mounted on ROV.

• 한국추진공학회지
• /
• 제18권4호
• /
• pp.50-60
• /
• 2014

초공동현상을 이용한 고속 수중 운동체와 함께 이를 가능하게 하는 기술로써 해수흡입 램젯 추진에 대한 연구가 여러 나라에서 진행되고 있다. 본 연구에서는 해수 흡입 램젯 엔진을 추진기관으로 하는 수중 운동체의 개념 설계를 진행하였다. 가동 환경을 확인하여 임무 작동 조건을 설정하였으며, 해당 조건 내에서 초공동현상 이론과 유체역학적 지식을 통해 운동체에 작용하는 항력을 예측하였다. 이로부터 필요 추력을 산출하여 추진기관의 대략적인 사이징과 부분별 성능해석을 수행하였으며, 설계한 추진기관의 추력 및 비추력 성능을 확인하였다.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.550-558
• /
• 2019

The roll motion of a general vessel, which is more influenced by resonance as compared to other motions, adversely affects the passenger and hull. Therefore, reducing the roll motion through an anti-rolling system is critical, and most ships use various devices such as anti-rolling tanks, bilge keels, and fin stabilizers to accomplish this. In this study, a simplified model is developed for the application of an anti-rolling device for unmanned semi-submersible vessels. The applied anti-rolling device is installed on the stern and stem of a ship using a pair of servo motors with added weight, and the motor is controlled through the Arduino. The moment of the motor is designed and implemented based on a mathematical model such that it is calculated through the restoring force according to the heel angle of the ship. The performance of the proposed system was verified by utilizing the roll damping coefficient calculated by the free-roll decay test and logarithmic decrement method and was validated by a towing tank test. The system is expected to be used for unmanned vessels to perform sustainable missions.

• 한국전산구조공학회논문집
• /
• 제15권1호
• /
• pp.1-8
• /
• 2002

물체가 수중에 입수할 때, 원래의 운동에너지는 물체와 그 주위의 물에 부가질량 형태로 분배된다. 이러한 에너지 혹은 운동량의 전달에 기인하여 물체는 유체동력학적 충격력과 가속도를 받는다. 이러한 충격거동은 수중운동체의 공중 발사에 중요한 고려 요인이 된다. 본 논문에서는 구명정 모델을 바탕으로 원통형 물체의 입수에 대한 충격거동을 해석하는 근사기법을 제안하였다. 충격력은 von Karman의 운동량 이론으로 계산하고, 운동, 특히 가속도는 유체동력학적 힘의 평형에 의하여 유도된 운동방정식의 수치 적분으로 계산하였다. 제안된 방법은 입수충격을 받는 물체의 초기설계나 운동 해석을 위한 단순하면서도 효과적인 방안이 될 수 있을 것으로 기대된다.