• Microbiology and Biotechnology Letters
• /
• v.48 no.1
• /
• pp.48-56
• /
• 2020

This study aimed to optimize the culture conditions to improve the crude biosurfactant activity of Bacillus pumilus IJ-1, using a 3³ full-factorial design of response surface methodology (RSM). It was found that submerged fermentation of B. pumilus improved the activity of the crude biosurfactant. The factors selected for optimization were NaCl concentration, temperature, and tryptone concentration. Response surface analysis revealed that the fitted quadratic model was statistically significant and produced an adequate R² value (0.9898) and a low probability value (<0.0001). The optimum level for each factor was found to be 0.567% (w/v) NaCl, 21.851℃ and 0.765% (w/v) tryptone, respectively. Crude biosurfactant activity was found to be most affected by tryptone concentration; then temperature, and finally NaCl concentration. Our results may potentially facilitate large-scale biosurfactant production from B. pumilus IJ-1.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.5
• /
• pp.341-346
• /
• 2001

For the purpose of mass producing Monascus red pigments optimum medium composition and environmental conditions were investigated in submerged flask cultures. The optimum carbon and nitrogen sources were determined to be 30g/L of glucose and 1.5 g/L of monosodium glutamate (MSG). Of the three metals examined, Fe$\^$2+/ showed the strongest stimulatory effect on pigment production and some stimulatory effect was also found in Mn$\^$2+/. Optimum pH and agitation speed were determined to be 6.5 and 700 rpm, respectively. Under the optimum culture conditions batch fermentation showed that the maximum biomass yield and specific productivity of red pigments were 0.20 g DCW/g glucose and, 32.5 OD$\sub$500/g DCW$\^$-1/h$\^$-1/, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.3
• /
• pp.204-208
• /
• 1993

A fully automatic image analysis method was applied to obtain detailed data on morphological parameters of a glucoamylase fermentation broth with Aspergillus niger No. PFST-38. a mutant strain for glucoamylase hyperproducer. In the initial stage of fermentation. there was an increase in hyphal length. whereas at the end of the fermentation a decrease in hyphal length and increase in hyphal thickness were observed. The percentage of clumps declined with dilution and the influence of shear stress upon hyphal length was negligible. It was found that the slower the decrease in the main hyphal length and the number of tips with the fermentation time. the higher the glucoamylase production rate was recorded. The production rate of glucoamylase was closely related to the increase in the hyphal thickness.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.5
• /
• pp.1017-1028
• /
• 2024

Lignocellulolytic enzymes play a crucial role in efficiently converting lignocellulose into valuable platform molecules in various industries. However, they are limited by their production yields, costs, and stability. Consequently, their production by producers adapted to local environments and the choice of low-cost raw materials can address these limitations. Due to the large amounts of olive stones (OS) generated in Morocco which are still undervalued, Penicillium crustosum, Fusarium nygamai, Trichoderma capillare, and Aspergillus calidoustus, are cultivated under different fermentation techniques using this by-product as a local lignocellulosic substrate. Based on a multilevel factorial design, their potential to produce lignocellulolytic enzymes during 15 days of dark incubation was evaluated. The results revealed that P. crustosum expressed a maximum total cellulase activity of 10.9 IU/ml under sequential fermentation (SF) and 3.6 IU/ml of β-glucosidase activity under submerged fermentation (SmF). F. nygamai recorded the best laccase activity of 9 IU/ml under solid-state fermentation (SSF). Unlike T. capillare, SF was the inducive culture for the former activity with 7.6 IU/ml. A. calidoustus produced, respectively, 1,009 ㎍/ml of proteins and 11.5 IU/ml of endoglucanase activity as the best results achieved. Optimum cellulase production took place after the 5th day under SF, while ligninases occurred between the 9th and the 11th days under SSF. This study reports for the first time the lignocellulolytic activities of F. nygamai and A. calidoustus. Furthermore, it underlines the potential of the four fungi as biomass decomposers for environmentally-friendly applications, emphasizing the efficiency of OS as an inducing substrate for enzyme production.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.423-429
• /
• 2009

The objective of this study was to investigate the potential of the application of lactic acid bacteria (LAB) from kimchi as a starter culture in the production of fermented sausages. To achieve this, a submerged model medium that contained LAB as part of a complex system of kimchi (0.5, 1.0, 1.0, 3.0, and 5.0%) and lyophilized kimchi powder (0.2 and 0.5%) was fermented for 120 h. During the fermentation period, the growth of total viable organisms and LAB, and the changes in the pH and the titratable acidity, were investigated. The initial LAB counts ranged from 6.4 to 7.7 Log CFU/mL for the kimchi media, and from 6.9 to 6.9 Log CFU/mL for the kimchi powder media. In all the kimchi batches, the LAB increased logarithmically, and the highest LAB counts (around 9 Log CFU/mL) were reached in 24 h. An evident lag phase of the LAB was observed in the kimchi powder samples and reached 8.8 Log CFU/mL in 8 h. The decrease in the pH and the formation of lactic acid were rapid in the kimchi batches, and reached pH values of 3.4-3.5 in 12 h. With these results, the LAB that was integrated with the addition of kimchi or kimchi powder demonstrated its potential utility as a substitute for starter culture.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.543-550
• /
• 1992

The production of xylanase and $\beta$-xylosidase was investigated in submerged culture of Aspergillus niger NRC 107. The maximum production occurred when the pH was controlled at 6.0 during the fermentation. Among the various carbon sources investigated, corn-cob xylan (1.5%, w/v) yielded maximal production of the enzymes. The $NaNO_{3}$ was the most favorable nitrogen source for enzyme production and $KH_2P0_4$ concentration at 0.3%(w/v) was found to be optimum. Incorporation of wheat bran to the culture medium improved xylanase production. Addition of L( -) sorbose to the culture medium promoted the secretion of $\beta$-xylosidase. It was possible to increase the production of xylanase (39.43 units/ml) and that of $\beta$-xylosidase (4.2 unitslml) by submerged culturing the A. niger NRC 107 in the modified medium.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.510-518
• /
• 1989

Most of orange peels are disposed from orange juice manufacturing process. Thus, our purpose is to utilize these orange peels as fermentation substrate. We have investigated culture conditions and factors influencing citric acid production by an isolated strain, Asp. niger. Citric acid production was much higher in semisolid culture than in submerged culture and the particle size of ground orange peels was favored at 20 mesh in semisolid culture. The optimal pH and temperature were 4.5-5.0 and 3$0^{\circ}C$ respectively and the temperature cycling at 35$^{\circ}C$ for 20 hrs durig exponential phase, 1$0^{\circ}C$ for 4 hrs and 3$0^{\circ}C$ during stationary phase showed higher citric acid production than did at fixed temperature, 3$0^{\circ}C$. The addition of NH$_4$NO$_3$0.2%, MgSO$_4$7$H_2O$ 0.1%, methanol 2.5%, ethanol 1.5%, to culture medium promoted citric acid production but the addition of trace metal ions as nutrients had not effect on the acid production in orange peel medium. Under the optimal culture conditions, maximum yield of citric acid was 80.4% in solid medium. Almost of all original components of citrus peel was consumed by Asp. niger during fermentation.

• Journal of Microbiology
• /
• v.44 no.2
• /
• pp.233-242
• /
• 2006

The objectives of this study were to optimize submerged culture conditions of a new fungal isolate, Ganorderma resinaceum, and to enhance the production of bioactive mycelial biomass and exopolysaccharides (EPS) by fed-batch culture. The maximum mycelial growth and EPS production in batch culture were achieved in a medium containing 10 g/l glucose, 8 g/l soy peptone, and 5 mM $MnCl_2$ at an initial pH 6.0 and temperature $31^{\circ}C$. After optimization of culture medium and environmental conditions in batch cultures, a fed-batch culture strategy was employed to enhance production of mycelial biomass and EPS. Five different EPS with molecular weights ranging from 53,000 to 5,257,000 g/mole were obtained from either top or bottom fractions of ethanol precipitate of culture filtrate. A fed-batch culture of G. resinaceum led to enhanced production of both mycelial biomass and EPS. The maximum concentrations of mycelial biomass (42.2 g/l) and EPS (4.6 g/l) were obtained when 50 g/l of glucose was fed at day 6 into an initial 10 g/l of glucose medium. It may be worth attempting with other mushroom fermentation processes for enhanced production of mushroom polysaccharides, particularly those with industrial potential.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.2
• /
• pp.322-327
• /
• 2008

1,5-Dihydroxy-3-methoxy-7-methylanthracene-9,10-dione (shiraiarin) is a kind of antitumor and antibacterial anthraquinone, and was produced for the first time from the submerged fermentation of Shiraia bambusicola, as confirmed by ESI-MS and NMR. The production of shiraiarin was significantly influenced when varying the carbon source, and a high amount of shiraiarin was only achieved when using lactose. The production of shiraiarin was also stimulated when using $NaNO_3$ as the nitrogen source, whereas other nitrogen sources inhibited its production. Shiraiarin was formed during the stationary phase with a pH value higher than 8. The production of shiraiarin was inhibited by sporulation.

• Microbiology and Biotechnology Letters
• /
• v.8 no.3
• /
• pp.181-191
• /
• 1980

For the purpose of studies on the citric acid production, some experiments were carried out with isolated strains. The results obtained were as follows. 1) The optimal culture media of the strain M-80 in surface culture contained 140g of sucrose, 3.0g of (N $H_4$)$_2$S $O_4$, 1.5g of K $H_2$P $O_4$, 0.2g of MgS $O_4$.7$H_2O$, 3.0mg of F $e^{++}$, 1.0mg of Z $n^{++}$, 0.5N HCI to a pH of 5.0 and distilled water to 1.0 liter; and that of the strain M-315 in surface culture contained 140g of sucrose, 2.0g of N $H_4$N $O_3$, 1.0g of K $H_2$P $O_4$, 0.25g of MgS $O_4$. 7$H_2O$, 2.0mg of F $e^{++}$, 2.0mg of Z $n^{++}$, 0.05mg of C $u^{++}$, 0.5N HCI to a pH of 4.5 and distilled water to 1.0 liter. While that of the strain M-315 in submerged culture contained 140g of sucrose, 2.5g of N $H_4$N $O_3$, 1.5g of K $H_2$P $O_4$, 0.3g of MgS $O_4$. 7$H_2O$, 3.0mg of F $e^{++}$, 0.1mg of C $u^{++}$, 0.5N HCI to a pH of 4.5 and distilled water to 1.0 liter. The optimal temperature and size of inoculum were mostly 28-3$0^{\circ}C$, 10$^{7}$ -10$^{8}$ spores/50ml, respectively. 2) Through the course of citric acid production, the growth of strains had nearly been completed, pH value was rapidly decreased below 2.0 and the content of sugar was also reduced, while the accumulation of citric acid in media was remarkably begun in about 3-4 days. The yields of citric acid generally reached the maximum level in 8-10 days in surface or submerged fermentation process. 3) Methanol was effective citric acid production when they were added to fermentation media. In the case of surface culture, by addition of 2％ (strain M-80), 3％ (strain M-315), the yields of citric acid was increased 6.5％, 20.6%, respectively and 5.0% yield was increased by addition of 3% methanol in submerged culture media of the strain M-315. 4) Chromatography analysis of culture broth after fermentation under optimal culture conditions detected that the majority of acid in media was citric acid. 72.1mg/ml, 98.1mg/ml, of citric acid were determined in surface culture media by strains of M-80, M-315, and 59.8 mg/ml of citric acid was contained in the submerged culture media by the strain M-315. strain M-315.