• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.6
• /
• pp.59-66
• /
• 2013

Spray characteristics of single round jet with liquid nitrogen and coaxial spray with liquid nitrogen and gaseous argon were observed. Shadowgraph method was used for spray visualization, and density gradient magnitude image was used to analyse the result. In subcritical condition, irregularity of the jet surface was harder in the coaxial spray. In supercritical condition, diffusion of nitrogen injected from shear coaxial injector was faster than single jet. Jet diameter was induced by averaging images, in supercritical condition, difference of diameter of coaxial jet was rapidly decreased than that of single jet.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.475-481
• /
• 2017

In this paper, high speed camera images were used to analyze the supercritical injection behavior of liquid hydrocarbon compounds used as main components of propellant fuel. Decane and Methylcyclohexane (MCH), which have different critical points among kerosene constituents, were selected as experimental fluid and Shadowgraphy technique was used for the analysis. The difference in the temperature variation from the initial injector state of the subcritical condition until the vaporization occurs was represented by the different behaviors of Decane and MCH. However, under the Supercritical conditions, the enthalpy of vaporization near the critical point approaches zero and the phase change to the Supercritical phase occurs instead of vaporization process. In the phase change of the Supercritical system, there was no rapid density change, so the liquid state image was observed in both the Decane and MCH.

• Wind and Structures
• /
• v.22 no.2
• /
• pp.253-272
• /
• 2016

The paper concerns with the method and results of wind tunnel investigations of the Strouhal number (St) of a stationary iced cable model of cable-supported bridges with respect to different angles of wind attack. The investigations were conducted in the Climatic Wind Tunnel Laboratory of the Czech Academy of Sciences in $Tel{\check{c}}$. The methodology leading to the experimental icing of the inclined cable model was prepared in a climatic section of the laboratory. The shape of the ice on the cable was registered by a photogrammetry method. A section of an iced cable model with a smaller scale was reproduced with a 3D printing procedure for subsequent aerodynamic investigations. The St values were determined within the range of the Reynolds number (Re) between $2.4{\cdot}10^4$ and $16.5{\cdot}10^4$, based on the dominant vortex shedding frequencies measured in the wake of the model. The model was oriented at three principal angles of wind attack for each of selected Re values. The flow regimes were distinguished for each model configuration. In order to recognize the tunnel blockage effect the St of a circular smooth cylinder was also tested. Good agreement with the reported values in the subcritical Re range of a circular cylinder was obtained. The knowledge of the flow regimes of the airflow around an iced cable and the associated St values could constitute a basis to formulate a mathematical description of the vortex-induced force acting on the iced cable of a cable-supported bridge and could allow predicting the cable response due to the vortex excitation phenomenon.

• Nuclear Engineering and Technology
• /
• v.14 no.3
• /
• pp.122-137
• /
• 1982

Analyzed is the sensitivity of reactor transient behavior to various reactor parameters during the reactivity induced accidents (RIA) of the Kori Unit 1. Included in the analysis is a partial spectrum of RIAs with relatively fast transients such as uncontrolled rod cluster control assembly bank withdrawl from a subcritical or low power startup condition and rod ejection accidents. The analysis can be performed generally in three steps: calculation of an average core power change, hot spot heat transfer calculation and DNBR (departure from nucleate boiling ratio) calculation. The computer codes used for the analysis are either developed based on the codes relevent to it. These codes are evaluated to be highly reliable. An extensive sensitivity analysis is performed to study the effects of various reactor design and operating parameters on the reactor transient behavior during the accidents. The assumptions and initial conditions used for the RIA analysis in the Kori Unit 1 FSAR (Final Safety Analysis Report) are reexamined, and the corresponding analysis results are reassessed, based on the sensitivity analysis results, to be conservative and reliable.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1061-1066
• /
• 2014

A stable second-order finite volume method was proposed to predict sediment transport under rapidly varied flow conditions such as transcritical flow. For the use under unsteady flow conditions, a sediment transport model was coupled with shallow water equations. HLLC approximate Riemann solver based on a monotone upstream-centered schemes for conservation laws (MUSCL) reconstruction was used for the computation of the flux terms. From the comparisons of dam break flow experiments on erodible beds in one- and two-dimensional channels, good agreements were obtained when proper parameters were provided. Lastly, dam surface erosion problem by overtopped water was simulated. Overall, the numerical solutions showed reasonable results, which demonstrated that the proposed numerical scheme could provide stable and physical results in the cases of subcritical and supercritical flow conditions.

• Journal of Environmental Impact Assessment
• /
• v.19 no.2
• /
• pp.153-168
• /
• 2010

The objectives of this study are to analyze flow characteristics for a side weir, which is an inlet structure for flow discharge reduction in the main channel through 3 dimensional numerical analysis and to understand the efficiency of the overflow effect at the side weir. In this study over 40 simulations using FLOW-3D, a computational fluid dynamics program were conducted, and the results were analyzed to find the influence of the flow hydraulics, geometry, channel and weir shapes on the coefficient. It is especially considered the relatively high stage in downstream that may cause flow within channel to be backed up along the channel. Additionally by setting up the scale of simulations much larger than the existing test equipment designed by other researchers, it is intended to analyze more accurate hydraulic behavior along with the realistic hydraulic features such as structures and volumes of flow. The results show that for design with subcritical flow only if the Froude number of upstream is sustained below 0.5 and the length of weir is 33-100% of the width of channel, it is expected to improve the efficiency of the overflow over a side weir.

• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.121-131
• /
• 2017

We studied the time-dependent behaviors of rock and concrete materials by conducting the static and dynamic long-term strength tests. In particular, acoustic emission(AE) signals generated while the tests were analyzed and used for the long-term stability evaluation. In the static subcritical crack growth test, the long-term behavior and AE characteristics of Mode I and Mode II were investigated. In the dynamic long-term strength test, the fatigue limit and characteristics of generation of AE were analyzed through cyclic four points bending test. The graph of the cumulative AE hits versus time showed a shape similar to that of the creep curve with the first, second and third stages. The possibility for evaluating the static and dynamic long-term stability of rock and concrete is presented from the log - log relationship between the slope of the secondary stage of cumulative AE hits curve and the delayed failure time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.326-326
• /
• 2017

개수로에서 비에너지(specific energy)는 수로바닥을 기준으로 단위무게의 물이 가지는 에너지로 정의되며 흐름의 위치수두와 속도수두의 합으로 표현된다. 비에너지는 수로단면의 변화에 따른 수심의 변화를 해석하기 위하여 사용되는 중요한 개념이다. 사각형 개수로에서의 비에너지 관계식은 3차방정식의 형태이며, 해석적으로 3개의 해(3개의 수심)를 가지나, 물리적인 의미를 가지는 해는 2개이며 나머지 하나의 해는 음수이므로 물리적인 의미를 가지지 않는다. 물리적인 의미를 가지는 2개의 해는 각각 흐름이 상류(subcritical flow)인 경우와 사류(supercritical flow)인 경우에 대한 수심이다. 즉, 일정한 유량이 흐르는 조건에서 동일한 비에너지를 가지는 수심이 상류와 사류에 각각 존재하는데, 이 2개의 수심을 대응수심(alternate depths)이라 정의한다. 이러한 사각형 개수로에 대한 비에너지 관계식은 3차방정식이므로 그 해석해를 구할 수 있어, 수로단면의 변화에 따른 흐름의 변화를 비교적 쉽게 해석할 수 있다. 사각형 개수로가 아닌 경우의 비에너지 관계식을 이론적으로 고찰하는 연구는 찾아보기 힘들다. 이에 본 연구에서는 포물선형 개수로에 대해서 비에너지 관계식을 유도하였다. 유도된 비에너지 관계식은 비선형 음함수의 형태로 해석적으로 해를 구할 수 없다. 유도된 관계식의 해법으로 2차의 정밀도를 가지는 Newton-Raphson방법을 이용하였으며, 계산의 초기치는 상용화된 Excel에서 쉽게 구할 수 있는 회귀식을 이용하여 구하였다. 적용 예를 통해, 단순 회귀식을 이용하는 경우에는 정해와의 상대오차가 2 - 8% 내외였는데, 본 연구에서 제안하는 방법을 사용하는 경우에는 동일한 조건에서 상대오차가 0.25% 내외를 보였다. 즉 본 연구에서 제시하고 있는 양해법을 이용하면, 포물선형 개수로 흐름의 대응수심을 용이하게 그리고 정확도가 매우 높게 산정할 수 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.45-52
• /
• 2008

In order to investigate the initiation and propagation processes of a spherical detonation wave induced by direct initiation, numerical simulations were carried out using two-dimensional compressible Euler equations with an axisymmetric assumption and a one-step reaction model based on Arrhenius kinetics with various levels of ignition energy. By varying the amount of ignition energy, three typical initiation behaviors, which were subcritical, supercritical and critical regimes, were observed. Then, the ignition energy of more than $137.5{\times}10^6$ in non-dimensional value was required for initiating a spherical detonation wave, and the minimum ignition energy(i.e., critical energy) was less than that of the one-dimensional simulation reported by a previous numerical work. When the ignition energy was less than the critical energy, the blast wave generated from an ignition source continued to attenuate due to the separation of the blast wave and a reaction front. Therefore, detonation was not initiated in the subcrtical regime. When the ignition energy was more than the minimum initiation energy, the blast wave developed into a multiheaded detonation wave propagating spherically at CJ velocity, and then a cellular pattern radiated regularly out from the ignition center in the supercritical regime. The influence on ignition energy was observed in the cell width near the ignition center, but the cell width on the fully developed detonation remained constant during the expanding of detonation wave due to the consecutive formation of new triple points, regardless of ignition energy. When the ignition energy was equal to the critical energy, the decoupling of the blast wave and a reaction front appeared, as occurred in the subcrtical regime. After that, the detonation bubble induced by the local explosion behind the blast wave expanded and developed into the multiheaded detonation wave in the critical regime. Although few triple points were observed in the vicinity of the ignition core, the regularly located cellular pattern was generated after the onset of the multiheaded detonation. Then, the average cell width on the fully developed detonation was almost to that in the supercritical regime. These numerical results qualitatively agreed with previous experimental works regarding the initiation and propagation processes.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2018

Temperatures of cryogenic nitrogen jet inside an injector and at three different downstream positions (0.9, 10.6, and 28.1d) were measured with thermocouples in sub- and supercritical states. The jet temperature decreased while cooling the supply line and injector. The jet experienced from flash boiling, boiling and then no boiling according to decreasing temperature. As an analogy to flash-boiling at the subcritical state, pseudo-flash boiling has been assumed considering the existence of pseudo-boiling at the supercritical state. By showing an area where the temperature did not increase downstream, the plausibility of pseudo-flash boiling is proposed.