• Elastomers and Composites
• /
• 제54권4호
• /
• pp.321-329
• /
• 2019

A series of poly(hyroxyamide)s (PHAs) was prepared by direct polycondensation reaction of 4,4'-(2,3-pyridinedioxy)dibenzoic acid and/or isophthalic acid with 3,3'-dihydroxybenzidine. The yield percentages of the products were high, and the inherent viscosities of the polymer in DMAc solution at 35℃ were 0.31-0.59 dL/g. All PHA polymers were found to be soluble in polar aprotic solvents such as DMAc, DMSO, NMP, and DMF. On the other hand, LiCl was required to dissolve IPHA-1 in aprotic solvents. Poly(benzoxazole)s (PBOs) were partially soluble in conc-H₂SO₄; IPBO-4, -5, and -6 were partially soluble in NMP only when LiCl was added to the solution, and the solution was heated. The PBO polymers showed a maximum weight loss in the temperature range of 654-680℃, and the char yields at 900℃ under nitrogen atmosphere exceeded 63%.

• Corrosion Science and Technology
• /
• 제22권2호
• /
• pp.90-98
• /
• 2023

In this study, cobalt oxide (Co₃O₄) and cobalt-doped magnetite (CoFe₂O₄) nanoparticles were synthesized by a hydrothermal method. They were then used as corrosion inhibitors for corrosion protection of AA2024-T3 aluminum alloys. These obtained nanoparticles were characterized by x-ray diffraction, field-emission scanning electron microscopy, and Zeta potential measurements. Corrosion inhibition activities of Co₃O₄ and CoFe₂O₄ nanoparticles were determined by performing electrochemical measurements for bare AA2024-T3 aluminum alloys in 0.05 M NaCl + 0.1 M Na₂SO₄ solution containing Co₃O₄ or CoFe₂O₄ nanoparticles. Corrosion protection for AA2024-T3 aluminum alloys by a water-based epoxy with or without the synthesized Co₃O₄ or CoFe₂O₄ nanoparticles was investigated by electrochemical impedance spectroscopy during immersion in 0.1 M NaCl solution. The corrosion protection of epoxy coating deposited on the AA2024-T3 surface was improved by incorporating Co₃O₄ or CoFe₂O₄ nanoparticles in the coating. The corrosion protection performance of the epoxy coating containing CoFe₂O₄ was higher than that of the epoxy coating containing Co₃O₄.

• Geomechanics and Engineering
• /
• 제20권2호
• /
• pp.165-174
• /
• 2020

The enzyme-induced carbonate precipitation (EICP) method has been investigated to improve the hydro-mechanical properties of natural soil deposits. This study was conducted to explore the stiffness evolution during various stress scenarios. First, the optimal concentration of urea, CaCl₂, and urease for the maximum efficiency of calcite precipitation was identified. The results show that the optimal recipe is 0.5 g/L and 0.9 g/L of urease for 0.5 M CaCl₂ and 1 M CaCl₂ solutions with a urea-CaCl₂ molar ratio of 1.5. The shear stiffness of EICP-treated sands remains constant up to debonding stresses, and further loading induces the reduction of S-wave velocity. It was also found that the debonding stress at which stiffness loss occurs depends on the void ratio, not on cementation solution. Repeated loading-unloading deteriorates the bonding quality, thereby reducing the debonding stress. Scanning electron microscopy and X-ray images reveal that higher concentrations of CaCl₂ solution facilitate heterogeneous nucleation to form larger CaCO₃ nodules and 11-12 % of CaCO₃ forms at the interparticle contact as the main contributor to the evolution of shear stiffness.

• Current Optics and Photonics
• /
• 제6권3호
• /
• pp.337-343
• /
• 2022

Microfluidic chips are new devices that can manipulate liquids at the micrometer level, and terahertz (THz) time-domain spectroscopy has good applicability in biochemical detection. The combination of these two technologies can shorten the distance between sample and THz wave, reduce THz wave absorption by water, and more effectively analyze the kinetics of biochemical reactions in aqueous solutions. This study investigates the effects of different external magnetic field intensities on the THz transmission characteristics of deionized water, CuSO₄, CuCl₂, (CH₃COO)₂Cu, Na₂SO₄, NaCl, and CH₃COONa; the THz spectral intensity of the sample solutions decrease with increasing intensity of the applied magnetic field. Analysis shows that the magnetic field leads to a change in the dipole moment of water molecules in water and electrolyte solutions, which enhances not only the hydrogen-bond networking ability of water but also the hydration around ions in electrolyte solutions, increasing the number of hydrogen bonds. Increasing the intensity of this magnetic field further promotes the hydrogen-bond association between water molecules, weakening the THz transmission intensity of the solution.

• 한국표면공학회지
• /
• 제57권1호
• /
• pp.8-13
• /
• 2024

Anodizing of Al6061 alloy was conducted in two different electrolytes of 20% sulfuric acid and 8% sulfuric acid + 3 % oxalic acid solutions at a constant current or decreasing current density conditions, and its dielectric breakdown voltage was measured. The surface morphology of anodic oxide films was observed by TEM and thermal treatment was carried out at 400 ℃ for 2 h to evaluate the resistance of the anodic oxide films to crack initiation. The anodic oxide film formed in 8% sulfuric acid + 3 % oxalic acid solution showed higher dielectric breakdown voltage and better resistance to crack initiation at 400 ℃ than that formed in 20% sulfuric acid solution. The dielectric breakdown voltage increased 6 ~12% by applying decreasing current density comparing with a constant current density.

• 한국재료학회지
• /
• 제9권9호
• /
• pp.872-877
• /
• 1999

본 연구에서는 NH(sub)4OH에 계면 활성제를 첨가한 세정액의 특성 및 세정 효과를 H(sub)2O(sub)2가 첨가된 NH(sub)4OH 세정액과 비교 연구하였다. NH(sub)4OH에 계면 활성제를 첨가한 경우 용액의 pH 및 산화 환원전위(Eh) 는 NH(sub)4OH의 값과 거의 유사하고 H(sub)2O(sub)2를 첨가한 경우에 pH는 감소하고 Eh는 증가하는 경향을 보였다. 표면장력은 계면 활성제를 첨가한 경우 약 72 dynes/cm에서 약 38dynes/cm로 감소하였으나 H(sub)2O(sub)2를 첨가한 경우에는 NH\ulcornerOH 용액과 비교 거의 변화가 없었다. 실리콘 웨이퍼의 식각 속도를 측정한 결과 H(sub)2O(sub)2나 계면 활성제를 첨가하지 않은 초순수와 1 : 5(NH(sub)4OH : H(sub)2O(sub)2)의 부피비의 NH(sub)4OH용액이 첨가한 용액에 비해 최소 50배 이상의 높은 식각 속도를 보였다. 파티클 제거 실험에서 H(sub)2O(sub)2가 첨가된 NH(sub)4OH 세정액은 실험에 사용한 실리콘 표면위의 직경 0.67$\mu\textrm{m}$의 PSL파티클을 세정액의 온도와 무관하게 잘 제거하였으나 계면 활성제를 첨가한 NH\ulcornerOH경우에 상온에서는 파티클을 제거할 수 없었으나 온도를 5$0^{\circ}C$와 8$0^{\circ}C$로 증가시킨 경우 H(sub)2O(sub)2가 첨가된 NH(sub)4OH와 유사한 세정 효과를 나타내었다.

• 현장농수산연구지
• /
• 제15권1호
• /
• pp.85-93
• /
• 2013

수확 시 과방의 생장(과방중, 과방장, 과방폭, 과병의 직경크기, 과병장)은 무처리에 비하여 GA₃ 10 mg·L^-1 처리가 증가되었다. GA₃ 농도별 과립의 생장 (과립수, 과립중, 과립경, 과립장)은 차이가 없었으나 지경중은 무처리에 비하여 GA₃ 5, 10, 20, mg·L^-1 처리 농도에서 증가되었다. 그러나 GA₃ 40 mg·L^-1 처리는 차이가 없었다. 과립의 밀착정도, 과분 발생 정도, 가용성고형물 및 과피의 착색 정도는 큰 차이가 없었으나 무핵 정도는 GA₃ 10 mg·L^-1 처리에서 다른 처리에 비하여 증가하였다. 과립의 열과 발생률은 무처리에 비하여 GA₃ 농도 5, 10, 20, 40 mg·L^-1에서 현저하게 감소하였다. 과립의 탄저병 발생률은 큰 차이가 없었다. 과방당 총 지경장은 무처리, 20 및 40 mg·L^-1 처리에 비하여 5 및 10 mg·L^-1처리에서 현저하게 증가하였다. 지경 순서에 의한 1번 지경부터 15번 지경까지 지경장은 GA₃ 10 mg·L^-1 처리는 증가하였다.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.230-237
• /
• 2020

In this part, an implicit time dependent solution is presented for the Boltzmann transport equation discretized by the analytic coarse mesh finite difference method (ACMFD) over the spatial domain as well as the simplified P₃ (SP₃) for the angular variable. In the first part of this work we proposed a SP₃-ACMFD approach to solve the static eigenvalue equations which provide the initial conditions for temp dependent equations. Having solved the 3D multi-group SP₃-ACMFD static equations, an implicit approach is resorted to ensure stability of time steps. An exponential behavior is assumed in transverse integrated equations to establish a relationship between flux moments and currents. Also, analytic integration is benefited for the time-dependent solution of precursor concentration equations. Finally, a multi-channel one-phase thermal hydraulic model is coupled to the proposed methodology. Transient equations are then solved at each step using the GMRES technique. To show the sufficiency of proposed transient SP₃-ACMFD approximation for a full core analysis, a comparison is made using transport peers as the reference. To further demonstrate superiority, results are compared with a 3D multi-group transient diffusion solver developed as a byproduct of this work. Outcomes confirm that the idea can be considered as an economic interim approach which is superior to the diffusion approximation, and comparable with transport in results.

• 한국재료학회지
• /
• 제27권4호
• /
• pp.179-183
• /
• 2017

$2ZrO_2{\cdot}P_2O_5$ powder, which is not synthesized by solid reaction method, was successfully synthesized through PVA solution method. In this process, the firing temperature and the PVA content strongly affected the crystallization behavior and final particle size. A stable ${\alpha}$-phase $2ZrO_2{\cdot}P_2O_5$ was synthesized at a firing temperature of $1200^{\circ}C$ and holding time of 4 h. ${\beta}$-phase $2ZrO_2{\cdot}P_2O_5$ was observed, with un-reacted $ZrO_2$ phases, for firing temperatures lower than $1200^{\circ}C$. In terms of the PVA content effect, the powder prepared with a PVA mixing ratio of 12:1 showed stable ${\alpha}$-phase $2ZrO_2{\cdot}P_2O_5$; however, the ${\beta}$-phase was found to co-exist at relatively higher PVA content. The synthesized ${\alpha}$-phase $2ZrO_2{\cdot}P_2O_5$ powder showed an average particle size of 100~250 nm and an average thermal expansion coefficient of $-2.5{\times}10^{-6}/^{\circ}C$ in the range of room temp. ${\sim}800^{\circ}C$.

• 한국인터넷방송통신학회논문지
• /
• 제20권4호
• /
• pp.171-176
• /
• 2020

본 논문은 NP-난제로 널리 알려진 최대 가중치 독립집합(MWIS) 문제에 대해 다항시간으로 풀 수 있는 알고리즘을 제시하였다. MWIS 문제에 대해 지금까지는 특정 그래프 형태에 특화된 다항시간 알고리즘, 또는 분산형, 클러스터 형성 방법들이 제안되기도 하였으나 모든 그래프 형태에 적합한 단일화된 알고리즘이 제안되지 않고 있다. 따라서 본 논문에서는 어떠한 형태의 그래프에도 적합한 유일한 다항시간 알고리즘을 제안한다. 제안된 알고리즘은 최대 가중치를 갖는 정점 v_i를 v_i와 이웃하지 않은 정점 들 중 최대 가중치를 갖는 v_j 정점과 병합하였다. 제안된 알고리즘을 무방향 그래프와 트리에 적용한 결과, 최적 해를 얻었다. 특히, 일부 데이터에 대해서는 기존에 알려진 해를 개선하는 결과도 얻었다.