• 전기화학회지
• /
• 제18권1호
• /
• pp.17-23
• /
• 2015

$Li_4Ti_5O_{12}$는 우수한 안정성으로 자동차용 리튬 이온 이차전지의 음극 활물질로서 각광 받고 있다. 그러나 넓은 밴드갭에 기인한 절연체 특성으로 고율 충/방전을 가능하게 하기 위해서는 전자 전도도의 개선이 필수적이다. 본 연구에서는 Cr 도핑을 통해 $Li_4Ti_5O_{12}$의 전자 전도도 개선을 목표로 하였으며, wet-mixing법을 통한 물질 합성시 도판트인 Cr 프리커서의 용해도 차이에 의한 Cr-doped $Li_4Ti_5O_{12}$의 전기화학적 특성 변화를 고찰하고자 하였다. 시료의 물리적 특성은 ICP, XRD, SEM, EXAFS을 통하여 확인하였고 1.0V~3.0V (vs. $Li/Li^+$) 하에서 충/방전 특성을 조사하였다. 프리커서의 용해도는 합성된 물질의 상(phase) 및 모폴로지에 큰 영향을 미쳤으며, 가장 용해도가 높은 $Cr(NO_3)_2$ 프리커서로부터 합성된 경우 Bare $Li_4Ti_5O_{12}$와 비교하여 약 2배 개선된 고율 충/방전 특성(130 mAh/g @ 10 C)을 확인하였다.

• 해양환경안전학회지
• /
• 제22권2호
• /
• pp.253-258
• /
• 2016

선박 및 해양구조물에서의 생물학적 오손을 방지하기 위하여 나노크기의 $MnO_x-WO_3-TiO_2$ 분말을 졸겔법으로 합성하여 특성을 제어하였고, 입자의 결정과 미세구조 등 분체특성 평가를 실시하였다. 자기마모형 방오도료의 안료에 적용하기 위하여 수지에 첨가된 $TiO_2$계 나노분말 안료의 함량에 따른 표면특성 및 방오성능을 확인하였다. $TiO_2$계 안료의 분체특성으로 비표면적은 약 $90m^2/g$, 입자크기는 약 100 ~ 150 nm을 보였다. 텅스텐 산화물은 망간산화물과 티타늄산화물과 상관관계를 통해, 삼원계 분체가 분체특성 및 표면특성이 우수하였다. 망간산화물의 첨가는 독특한 산화환원 특성으로 인하여 방오성능을 증가시키고, 텅스텐 산화물은 안료의 분체특성을 향상시킴으로, 안료와 수지의 비율을 조절하여 분산성, 표면특성 및 방오성능을 제어하였다. 그 결과로, 분산성 및 표면특성에 있어서 1, 5 wt. % 안료가 첨가된 것이 일부 우수하였으나, 5개월 동안의 해상침지시험에서는 2 wt. % 함유된 시편이 높은 방오성능을 보여 해양구조물의 방오안료 적용가능성을 확인하였다.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.490-497
• /
• 2002

$CaO-SiO_2-B_2O_3$계의 결정화유리의 소결 특성 및 기계적 특성, 생체활성을 알아보았다. 이 조성의 결정화유리는 750-830${\circ}$ 사이에서 소결 되었으며 치밀한 미세구조를 보였다. 이 결정화 유리는 단사정계 월라스토나이트(monoclinic wollastonite), 칼슘보레이트(Calcium borate, $CaB_2O_4$) 결정상과 보로실리케이트(borosilicate) 유리 기지상(matrix)의 3상으로 구성되었다. 기계적 강도는 지금까지 알려진 다른 생체활성 세라믹스보다 우수하였으며 특히 압축강도(2813 MPa), 파괴인성($3.12 MPa{\cdot}m^{1/2}$)이 높았다. 생체활성은 결정화유리 중 calcium borate와 보로실리케이트 유리의 양에 의존하였는데, 용해도가 높은 calcium borate는 의사체액(SBF)의 칼슘이온의 과포화도를 상승시키고 borosilicate 유리는 탄산아파타이트 핵생성에 필요한Si-OH기를 형성시켜 탄산아파타이트 층이 빨리 생성되기 때문으로 판단된다. 따라서 $CaB_2O_4$와 borosilicate 유리가 많을수록 결정화유리의 생체활성이 뛰어난 것으로 생각된다.

• Journal of Dairy Science and Biotechnology
• /
• 제38권3호
• /
• pp.161-167
• /
• 2020

Cheese pizzas fortified with casein phosphopeptide (CPP) and calcium were subjected to an in vitro digestion to assess whether CPP could prevent the precipitation of calcium. The total calcium content of the cheese pizzas was adjusted to 1,000 mg per pizza (~370 g) with the addition of calcium originating from eggshells. Two levels of trypsin-digested caseins (367 and 459 mg), with a CPP content of ~20%, were added to each pizza. The in vitro digested pizzas were then centrifuged and the supernatant was mixed with Na₂HPO₃ at 37℃ to estimate the possible soluble effect of CPP on calcium. After 24 h of reaction, the solution was centrifuged and the calcium content in the resultant supernatant was analyzed by inductively coupled plasma-atomic emission spectroscopy. One-way statistical analyses showed that CPP had a positive effect on the solubilization of calcium against phosphate (p<0.05). Cheese pizza supplemented with 459 mg of CPP powder was able to prevent precipitation of calcium by 98.8%, whereas no CPP-added cheese pizza solubilized 86.4% of the calcium. A sensory test was also carried out, revealing that panelists could not discern the bitter taste of the CPP added to the pizzas.

• 한국의류학회지
• /
• 제34권11호
• /
• pp.1767-1778
• /
• 2010

This study investigates applying $TiO_2$ (titanium dioxide) nanoparticles to polypropylene nonwoven fabrics via electrospinning for the development of UV-protective materials. To fabricate uniform nanocomposite fibers, three types of $TiO_2$ nanoparticles were applied: powder, colloid, and $TiO_2$ coated polymer pellets. $TiO_2$/polyurethane (PU) and $TiO_2$/poly(vinyl alcohol) (PVA) nanocomposite fibers were electrospun and the morphology was examined using a field-emission scanning electron microscope and a transmission electron microscope. Layered fabric systems with electrospun $TiO_2$ nanocomposite fiber webs were developed at various concentrations of $TiO_2$ in a range of the web area density. The effects of $TiO_2$ concentration and web area density on UV-protective properties were examined. When $TiO_2$ colloid was added into a PVA polymer solution, uniform nanocomposite fiber webs in which $TiO_2$ particles were evenly dispersed were produced. Water-soluble PVA nanofiber webs were given a heat treatment to stabilize the electrospun PVA fibrous structure against dissolution in water. $TiO_2$/PVA nanoeomposite fiber webs with 2wt% $TiO_2$ and 3.0g/$m^2$ web area density exhibited an ultraviolet protection factor of greater than 50, indicating excellent UV protection.

• 한국대기환경학회지
• /
• 제28권4호
• /
• pp.384-395
• /
• 2012

This study was performed to develop the source profiles for fine particles ($PM_{2.5}$) emitted from the biomass burning. The multi-method research strategy included a usage of combustion devices such as field burning, fireplace, and residential wood burning to burn rice straw, fallen leaves, pine tree, and oak tree. The data were collected from multiple sources and measured water-soluble ions, elements, elemental carbon (EC), and organic carbon (OC). From this study, it turned out that OC (34~67%) and EC (1.2~39%) are the major components emitted from biomass burning. In the case of burning rice straw at field burning, OC (66.6%) was the most abundant species, followed by EC (4.3%), $Cl^-$ (3.6%), Cl (2.1%), and $SO^{2-}_4$(1.9%). Burning rice straw, fallen leaves, pine tree, and oak tree at fireplace, the amount of OC was 58.5%, 52.7%, 52.5%, and 61.2%, and that of EC was 1.2%, 18.4%, 36.5%, and 2.7%, respectively. The ratio of OC for the burning of pine tree and oak tree from the residential wood burning device was 56.9% and 34.3%, and that of EC was 25% and 38.6%, respectively. Applying the measured data with respect to the proportion of components emitted from biomass burning to reference model, it turned out that self-diagnosed result was appropriate level, and the result based on the model is in highly corresponding to actual timing of biomass burning.

• The Korean Journal of Physiology and Pharmacology
• /
• 제24권3호
• /
• pp.223-232
• /
• 2020

Sesamin, a lipid-soluble lignin originally isolated from sesame seeds, which induces cancer cell apoptosis and autophagy. In the present study, has been reported that sesamin induces apoptosis via several pathways in human lung cancer cells. However, whether mitophagy is involved in sesamin induced lung cancer cell apotosis remains unclear. This study, the anticancer activity of sesamin in lung cancer was studied by reactive oxygen species (ROS) and mitophagy. A549 cells were treated with sesamin, and cell viability, migration ability, and cell cycle were assessed using the CCK8 assay, scratch-wound test, and flow cytometry, respectively. ROS levels, mitochondrial membrane potential, and apoptosis were examined by flow cytometric detection of DCFH-DA fluorescence and by using JC-1 and TUNEL assays. The results indicated that sesamin treatment inhibited the cell viability and migration ability of A549 cells and induced G₀/G₁ phase arrest. Furthermore, sesamin induced an increase in ROS levels, a reduction in mitochondrial membrane potential, and apoptosis accompanied by an increase in cleaved caspase-3 and cleaved caspase-9. Additionally, sesamin triggered mitophagy and increased the expression of PINK1 and translocation of Parkin from the cytoplasm to the mitochondria. However, the antioxidant N-acetyl-L-cysteine clearly reduced the oxidative stress and mitophagy induced by sesamin. Furthermore, we found that cyclosporine A (an inhibitor of mitophagy) decreased the inhibitory effect of sesamin on A549 cell viability. Collectively, our data indicate that sesamin exerts lethal effects on lung cancer cells through the induction of ROS-mediated mitophagy and mitochondrial apoptosis.

• 한국대기환경학회지
• /
• 제29권6호
• /
• pp.701-712
• /
• 2013

The purpose of this study is to determine concentrations and compositions of $PM_{2.5}$ and their characteristic variations at Ieodo Ocean Research Station in the East China Sea and to examine the influence of air pollutants transported from Asia continents. $O_3$ and meteorological parameters were measured since June 2003 and $PM_{2.5}$ filter samples were collected from June 2004 to June 2008. In total, 244 samples were analyzed for water soluble ions and carbonaceous compounds. The mean mass concentration of $PM_{2.5}$ and $O_3$ were $21.8{\pm}14.9{\mu}g/m^3$ and $51.6{\pm}16.1$ ppb, respectively. The average concentrations (mass fractions) of sulfate and ammonium were $6.26{\mu}g/m^3$ (28.74%) and $1.59{\mu}g/m^3$ (7.31%), respectively. Nitrate was considered to be lost through evaporation due to long stay at the station. The mean concentrations of EC and OC were $1.01{\mu}g/m^3$ and $2.34{\mu}g/m^3$, respectively, from June 2006 to June 2008. The average OC/EC ratio was 2.31. The organic matter converted from OC by multiplying 2.1 and elemental carbon constituted 22.60% and 4.66% of $PM_{2.5}$ mass, respectively.

• Advances in Energy Research
• /
• 제4권2호
• /
• pp.177-187
• /
• 2016

Ammonia borane $NH_3BH_3$ solubilized in organic solvent is a potential liquid-state chemical hydrogen storage material. In this study, metal acetylacetonates like $Fe(O_2C_5H_7)_3$, $Co(O_2C_5H_7)_2$, $Ni(O_2C_5H_7)_2$, $Pd(O_2C_5H_7)_2$, $Pt(O_2C_5H_7)_2$ and $Ru(O_2C_5H_7)_3$ are considered for assisting dehydrocoupling of ammonia borane in diglyme (0.135 M) at $50^{\circ}C$. The molar ratio between ammonia borane and metal acetylacetonate is fixed at 100. A protocol for the separation of the soluble and insoluble fractions present in the slurry is proposed; it consists in using acetonitrile to make the precipitation of metal-based compounds easier and to solubilize boron-based intermediates/products. The nature of the metal does not affect the dehydrocoupling mechanisms, the $^{11}B\{^1H\}$ NMR spectra showing the formation of the same reaction intermediates. The aforementioned metal acetylacetonates do mainly have effect on the kinetics of dehydrocoupling. Dehydrocoupling takes place heterogeneously and dehydrogenation of ammonia borane in these conditions leads to the formation of polyborazylene via intermediates like e.g., B-(cyclodiborazanyl) amine-borane and borazine. Our main results are reported and discussed herein.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권2호
• /
• pp.254-263
• /
• 2020

Objective: The objective of this study was to investigate the effects of wilting and additives on the fermentation quality, structural and non-structural carbohydrate composition of mulberry silages. Methods: The selected lactic acid bacteria strains Lactobacillus plantarum 'LC279063' (L1), commercial inoculant Gaofuji (GF), and Trichoderma viride cellulase (CE) were used as additives for silage preparation. Silage treatments were designed as control (CK), L1, GF, or CE under three wilting rates, that is wilting for 0, 2, or 4 hours (h). After ensiling for 30 days, the silages were analyzed for the chemical and fermentation characteristics. Results: The results showed that wilting had superior effects on increasing the non-structural carbohydrate concentration and degrading the structural carbohydrate. After ensiling for 30 days, L1 generally had a higher fermentation quality than other treatments, indicated by the lower pH value, acetic acid, propionic acid and ammonia nitrogen (NH₃-N) content, and the higher lactic acid, water soluble carbohydrate, glucose, galactose, sucrose, and cellobiose concentration (p<0.05) at any wilting rate. Wilting could increase the ratio of lactic acid/acetic acid and decrease the content of NH₃-N. Conclusion: The results confirmed that wilting degraded the structural carbohydrate and increased the non-structural carbohydrate; and L1 exhibited better properties in improving fermentation quality and maintaining a high non-structural carbohydrates composition compared with the other treatments.