• Korean Journal of Materials Research
• /
• v.12 no.1
• /
• pp.75-81
• /
• 2002

The ferroelectric properties of Pb(Zr,Ti)O$_3$[PZT] films degrade when the films with Pt top electrodes are annealed in hydrogen containing environment. This is due to the reduction activity of atomic hydrogen that is generated by the catalytic activity of the Pt top electrode. At the initial stage of hydrogen annealing, oxygen vacancies are formed by the reduction activity of hydrogen mainly at the vicinity of top Pt/PZT interface, resulting in a shift of P-E (polarization-electric field) hysteresis curve toward the negative electric field direction. As the hydrogen annealing time increases, oxygen vacancies are formed inside the PZT film by the inward diffusion of hydrogen ions, as a result, the polarization degrades significantly and the degree of P-E curve shift decreases gradually. The direction and the magnitude of the remnant polarization in the PZT film affect the motion of hydrogen ions which determines the degradation of polarization characteristics and the shift in the P-E hysteresis curve of the PZT capacitor during hydrogen annealing. When the remnant polarization is formed in the PZT film by applying a pre-poling voltage prior to hydrogen annealing, the direction of the P-E curve shift induced by hydrogen annealing is opposite to the polarity of the pre-poling voltage. The hydrogen-induced degradation behavior of the PZT capacitor is also affected by the internal field that has been generated in the PZT film by the charges located at the top interface prior to hydrogen annealing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.3875-3891
• /
• 2021

In this study, a Velostat pressure sensor was manufactured to develop a plantar pressure measurement system and a C#-based application was developed to monitor and collect plantar pressure data in real time. In order to evaluate the characteristics of the proposed plantar pressure measurement system, the accuracy of plantar pressure index and personal classification was verified by comparing with MatScan, a commercial plantar pressure measurement system. As a result, the output characteristics according to the weight of the Velostat pressure sensor were evaluated and a trend line with the reliability of r² = 0.98 was detected. The Root Mean Square Error(RMSE) of the weighted area was 11.315 cm², the RMSE of the x coordinate of Center of Pressure(CoP_x) was 1.036 cm and the RMSE of the y coordinate of Center of Pressure(CoP_y) was 0.936 cm. Finally, inaccuracy of personal classification, the proposed system was 99.47% and MatScan was 96.86%. Based on the advantage of being simple to implement and capable of manufacturing at low cost, it is considered that it can be applied to various fields of measuring vital signs such as sitting posture and breathing in addition to the plantar pressure measurement system.

• International Journal of High-Rise Buildings
• /
• v.4 no.4
• /
• pp.241-247
• /
• 2015

In this study, an approximate computer-based method was developed to analyze the behavior of raft and piled raft foundations. Special attention is given to the improved analytical method proposed by considering raft flexibility and soil nonlinearity. The overall objective of this study is to focus on the application of a simplified analysis method for predicting the behavior of sub-structures. Through the comparative studies, it is found that the computer programs (YS-MAT and YSPR), developed in this study, is in agreement with the general trends observed by field measurements. Therefore, YS-MAT (Yonsei-Mat) and YSPR (Yonsei Piled Raft) can be effectively used for the preliminary design of a raft or a piled raft foundation for high-rise buildings.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.2
• /
• pp.78-88
• /
• 2003

This study was conducted to develop the plant-mat for ecological restoration which was formed as the thin multi-layers of woven nets, soil media, seeds, etc. The experimental site was selected at a slope of 240$m^2$ at the rear of Design College of Sangmyung University and divided into 8 sub-experimental plots (20$m^2$ each) according to mat types. (forest-type and grass-type mats with and without seed attachment, respectively) Also, the existing vegetation plot and the no-treatment plot were included in this experiment for comparison. The experiment construction was conducted on September 3, 2002. Mat covered plots regardless of seed attachment showed nearly no signs of erosion even if rainy season in summer compared to the no-treatment plot. Vegetation monitoring result showed that germination rates were somewhat high in both forest and grass-type mats without seed attachment in the initial germination stage. Although germination rates of seed attached mats were somewhat slower than non-seed attached mats in the germination stage, but over time, it showed a good rooting and shooting environment for germinated tree and grass species because of soil media existence within the mat. This indicates that while non seed-attached mats require follow-up maintenance, seed-attached mats does not require maintenance after rooting and germination.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.403-408
• /
• 2014

BACKGROUND: Kiwifruit is a warm-temperate, deciduous fruit tree. It is sensitive to frost or freeze damage during winter. Therefore, the farmers cover kiwifruit trunk with rice straw to preclude freeze injury. This study was conducted to evaluate trunk wraps for protection of freeze injury of kiwifruit (Actinidia deliciosa) vines. METHODS AND RESULTS: The experimental orchard was located in Sacheon (lat. $34^{\circ}56'N$, long. $128^{\circ}03'E$) of Gyeongsangnam-do, South Korea. The vines were 5-6-year-old 'Hayward'. Two wrap materials, rice straw and silver-cushioned mat (reflective foil-coated, plastic-foamed mat, Ganan Industry, Rep. of Korea) were evaluated for their heat-retaining ability. The trunks of kiwifruit vines were wrapped in late December, and the wraps were removed in mid-April the following year (2012/13 and 2013/14). Temperature inner wraps were recorded from January to March in 2013 and 2014 by WatchDog 2450 (Spectrum Technologies, Inc., USA). In 2013, the lowest ambient temperature of January and February was $-10.2^{\circ}C$, $-10.9^{\circ}C$, respectively. The lowest temperature of inner-wrap of silver -cushioned mat was $-6.3^{\circ}C$, $-2.6^{\circ}C$ in January and February, respectively. However, rice straw showed $-9.8^{\circ}C$ and $-9.9^{\circ}C$ in its lowest value of January and February. And also silver cushioned mat appeared to be superior to rice straw in its ability of heat-retaining during night time.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.583-597
• /
• 1995

We investigated the effect of the oxygne partial pressure on the phase stability of B $i_{2}$S $r_{2}$Ca C $u_{2}$ $O_{8+x}$ and B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ at 82$0^{\circ}C$. As the oxygen pressure decreased, B $i_{2}$Sr/sb 2/CaC $u_{2}$ $O_{8+x}$ melted at 2.2$\times$10$^{-3}$ atm $O_{2}$. In the case of the B $i_{1.7}$P $b_{0.4}$S $r_{2}$C $a_{2}$ $O_{10+x}$, it started to decompose into theree phases of B $i_{2}$S $r_{2}$Cu $O_{6+y}$, $Ca_{2}$Cu $O_{3}$ and C $u_{4}$ $O_{3}$ and C $u_{4}$ $O_{3}$ at 8.0$\times$10$^{-3}$ atm $O_{2}$ and was completely decomposed at 4.3$\times$10$^{-3}$ atm $O_{2}$ B $i_{2}$S $r_{2}$C $a_{2}$C $u_{3}$ $O_{10+x}$ phase was not formed by the solid state reaction from the mixutre of $i_{2}$S $r_{2}$CaCu.sub 2/ $O_{8+x}$, $Ca_{2}$Cu $O_{3}$ and CuO down to 2.2$\times$10.sub -3/ atm O.sub 2/ but formed by the solidifciation of the formed from the mixture of the intermediate compounds in the Bi-Sr-Ca-Cu-O system and the fromation temperature of Bi.sub 2/S $r_{2}$C $a_{2}$Cu.$_{3}$ $O_{10+x}$ can be lowered by reducing oxygen partial pressure.e.e.ure.e.e.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.47-52
• /
• 2012

Abstract: In this study, PAN/$TiO_2$ fiber mats were fabricated from polyacrylonitrile (PAN) and titanium(IV) butoxide ($Ti(OBu)_4$) by an electrospinning method with various solution concentrations, applied voltages and solution flow rates. The fiber mats were irradiated with an electron beam to induce structural crosslinking and enhance photocatalytic activity. As a result, uniform and bead-free fibers without pits or cracks on surface were obtained at 5 wt% of $Ti(OBu)_4$ solution with 15 kV and 0.02 mL/min flow rate. The PAN/$TiO_2$ fiber mats were irradiated with an electron beam of 1.14 MeV acceleration voltage, 4 mA of current and $1{\times}10^4kGy$. Electron beam irradiation was enhanced the photocatalytic activity of PAN/$TiO_2$ nano fiber mat. The photocatalytic activity of the PAN/$TiO_2$ fiber mat was analyzed by degradation of methylene blue and volatile organic compounds.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.592-599
• /
• 2018

An increase in the global production of biodiesel has resulted in the newfound significance of its byproduct, glycerol. The synthesis of acetins is an economical avenue to enhance the value of glycerol derived from biodiesel. WE developed an eco-friendly process for the synthesis of fuel additives from glycerol using a mixed oxide $SO{_4}^{2-}/CeO_2-Al_2O_3$ as catalyst. The $CeO_2-Al_2O_3$ mixed oxide was synthesized by the combustion method and then sulfated. The characterization of the catalyst was by means of XRD, BET, FTIR, and SEM. The influence of temperature, mole ratio and catalyst loading on yield and selectivity of the acetins was studied for the esterification of glycerol. The reaction rate constants ($k_1$, $k_2$ and $k_3$) were estimated using optimization method in MAT lab, and the activation energies ($E_1$, $E_2$ and $E_3$) were determined by the Arrhenius equation. Furthermore, a kinetic model was developed.

• The Korean Journal of Ceramics
• /
• v.7 no.2
• /
• pp.70-73
• /
• 2001

Phase transformation of TiSi$_2$ confined in sub-micron area of which the size is around or smaller than the grain size of C49 TiSi$_2$ phase is studied. It has been known that the C49 to C54 phase change is massive transformation that occurs abruptly starting from C54 nuclei located at triple point grain boundaries of C49 phase. When the C49 phase is confined in sub-micron area, however, the massive phase transformation is observed to be hindered due to the lack of the triple point grain boundaries of C49 phase. Heat treatment at higher temperatures starts to decompose the C49 phase, and the resulting decomposed Ti atoms diffuse to, and react with, the underneath Si material to form C54 phase that exhibits spherical interface with silicon. The newly formed C54 grains can also trigger the massive phase transformation to convert the remaining undecomposed C49 grains to C54 grains by serving as nuclei like conventional C54 nuclei located at triple point grain boundaries.

• Geomechanics and Engineering
• /
• v.28 no.4
• /
• pp.385-396
• /
• 2022

The accurate determination of the subgrade reaction modulus (K_s) of soil is an important factor for geotechnical engineers. This study estimated the K_s of soft soil improved with floating deep cement mixing (DCM) columns. A novel prediction model was developed that emphasizes the accuracy of identifying the most significant parameters of K_s. Several multi-layer perceptron (MLP) models that were trained using the Levenberg Marquardt (LM) backpropagation method were developed to estimate K_s. The models were trained using a reliable database containing the results of 36 physical modelling tests. The input parameters were the undrained shear strength of the DCM columns, undrained shear strength of soft soil, area improvement ratio and length-to-diameter ratio of the DCM columns. Grey wolf optimization (GWO) was coupled with the MLPs to improve the performance indices of the MLPs. Sensitivity tests were carried out to determine the importance of the input parameters for prediction of K_s. The results showed that both the MLP-LM and MLP-GWO methods showed high ability to predict K_s. However, it was shown that MLP-GWO (R = 0.9917, MSE = 0.28 (MN/m²/m)) performed better than MLP-LM (R =0.9126, MSE =6.1916 (MN/m²/m)). This proves the greater reliability of the proposed hybrid model of MLP-GWO in approximating the subgrade reaction modulus of soft soil improved with floating DCM columns. The results revealed that the undrained shear strength of the soil was the most effective factor for estimation of K_s.