• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.177-182
• /
• 2012

Automotive sub-mat carpet for convenience and comfort of floor administration is additional supplemented floor mat. Sub Mat Backing of the current vehicle's materials reclaimed rubber, PVC, etc. are used, but secondary rubber and PVC Backing have bad sound absorption. Also rubber is heavy too. Contact surfaces between PET staple fiber, PET non-woven, PVC backing and car's floor carpet was measured the coefficient of friction for each sub-mat's non-slip evaluation. A surface of PET non-woven sub-mat has the highest coefficient of friction. Each of sample was observed by optical microscope the contact surfaces before and after. Contact surfaces of PET staple fiber sub-mat was changed increasingly to non-woven. This fact is shown that the sub-mat would be tangled between its contact surface and top of the floor carpet. It is expected to be highly non-slip. In case of PET non-woven sub-mat had not different for contact surfaces between before and after. And PVC backing was shown lower non-slip than other samples. The result of optical microscope and coefficient of friction is seems to be related.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.171.2-171.2
• /
• 2016

The 2-dimensiona electron gas (2DEG) layers have opened tremendous interests in the heterooxide interfaces formed between two insulating materials, especially between LaAlO3 and $SrTiO_3$. The 2DEG layers exhibit extremely high mobility and carrier concentrations along with metallic transport phenomena unlike the constituent oxide materials, i.e., $LaAlO_3$ and $SrTiO_3$. The current work inserted artificially the interfacial layer, $Sr_xCa_{1-x}TiO_3$ between $LaAlO_3$ and $SrTiO_3$, with the aim to controlling the 2-dimensional transports. The insertion of the additional materials affect significantly their corresponding electrical transports. Such features have been probed using DC and AC-based characterizations. In particular, impedance spectroscopy was employed as an AC-based characterization tool. Frequency-dependent impedance spectroscopy have been widely applied to a number of electroceramic materials, such as varistors, MLCCs, solid electrolytes, etc. Impedance spectroscopy provides powerful information on the materials system: i) the simultaneous measurement of conductivity and dielectric constants, ii) systematic identification of electrical origins among bulk-, grain boundary-, and electrode-based responses, and iii) the numerical estimation on the uniformity of the electrical origins. Impedance spectroscopy was applied to the $LaAlO_3/Sr_xCa_{1-x}TiO_3/SrTiO_3$ system, in order to understand the 2-dimensional transports in terms of the interfacial design concepts. The 2-dimensional conduction behavior system is analyzed with special emphasis on the underlying mechanisms. Such approach is discussed towards rational optimization of the 2-dimensional nanoelectronic devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.188.2-188.2
• /
• 2015

The presence of the conduction interface in epitaxial $LaAlO_3/SrTiO_3$ thin films has opened up challenging applications which can be expanded to next-generation nano-electronics. The metallic conduction path is associated with two adjacent insulating materials. Such device structure is applicable to frequency-dependent impedance spectroscopy. Impedance spectroscopy allows for simultaneous measurement of resistivity and dielectric constants, systematic identification of the underlying electrical origins, and the estimation of the electrical homogeneity in the corresponding electrical origins. Such unique capability is combined with the intentional control on the interface composition composed of $SrTiO_3$ and $CaTiO_3$, which can be denoted by $SrxCa1-_xTiO_3$. The underlying $Sr_xCa1-_xTiO_3$ interface was deposited using pulsed-laser deposition, followed by the epitaxial $LaAlO_3$ thin films. The platinum electrodes were constructed using metal shadow masks, in order to accommodate 2-point electrode configuration. Impedance spectroscopy was performed as the function of the relative ratio of Sr to Ca. The respective impedance spectra were analyzed in terms of the equivalent circuit models. Furthermore, the impedance spectra were monitored as a function of temperature. The ac-based characterization in the 2-dimensional conduction path supplements the dc-based electrical analysis. The artificial manipulation of the interface composition will be discussed towards the electrical application of 2-dimensional materials to the semiconductor devices in replacement for the current Si-based devices.

• Journal of Ceramic Processing Research
• /
• v.19 no.5
• /
• pp.388-393
• /
• 2018

Sublimation of $Bi_2O_3$-based materials is an important degradation issue for the long-term applications of many electronic devices. A series of $SnO_2$-doped $Bi_2O_3$ materials (SBO), was synthesized, densified, and then tested in air or strong reducing atmosphere. The $SnO_2$-doping effects and sublimation kinetics of the SBO materials were studied by X-ray diffraction (XRD), scanning electron microscope (SEM) and precise mass loss measurement. The results show that formation of $Bi_2Sn_2O_7$ phase greatly retards the mass loss of SBO. The SBO samples show a surface sublimation in an energy of $52.6kJ{\cdot}mol^{-1}$. However, the sublimation is also controlled by surface microstructure as the amount of vaporizing species (the Bi or gaseous Bi-oxides) is more than 0.1 mass%. The evaporation is retarded on the rough surface and the mechanism of surface evaporation is changed to diffusional control.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.366.2-366.2
• /
• 2014

Impedance spectroscopy allows for simultaneous characterization of interface-controlled materials and/or devices in terms of electrical and dielectric aspects. Recently, there have tremendous interests in 2-dimensional electron gas layers (2DEGs) involving $LaAlO_3$ and $SrTiO_3$ whose features incorporates extremely high mobility and carrier concentrations along with metallic responses unlike the constituents, $LaAlO_3$ and $SrTiO_3$. Impedance spectroscopy offers the following unique features, such as simultaneous determination of conductivity and dielectric constants, identification of electrical origins among bulk-, grain boundary-, and electrode-based responses. Impedance spectroscopy was applied to the 2DEG $LaAlO_3/SrTiO_3$ system, in order to extract the electrical and dielectric information operating in the 2DEG system. The unique responses of the 2DEG system are investigated in terms of temperature and device structures. The underlying mechanism of the 2DEG system is proposed with the aim to optimizing the high-mobility 2DEG responses and to expedite the associated devices towards the high-density integrated chips.

• Bulletin of the Korean Mathematical Society
• /
• v.15 no.2
• /
• pp.53-57
• /
• 1979

• Journal of Mushroom
• /
• v.20 no.2
• /
• pp.69-77
• /
• 2022

Eco-friendly materials, such as alternative vegan materials using various fungal resources, are being actively researched to reduce environmental pollution and facilitate a healthy lifestyle. The fungal mycelium-based mushroom mycelium mat is one such emerging material. In this study, the commonly used mushroom mycelium culture method was modified to reduce the time required to produce the mycelium mat, lower the possibility of contamination, and improve the properties and quality of the mat. Shortening the period required for the previously used primary bag culture and secondary mat production culture. A culture method in which the bag culture was omitted was attempted using a mycelium mutated by gamma irradiation to the mycelium of Trametes orientalis. In addition, various nutrients were added to the fungal solution to observe the change in physical properties of the fungal mat. High-quality mycelium mats were produced in the experimental group containing 1.5% CaCO₃ in sawdust medium, and the period was also reduced by more than 10 days compared to the existing production method. In the future, for mass producing mycelium mats, additional selection of medium components and optimization of culture conditions are essential.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.738-741
• /
• 2000

Univorm epitaxial $CoSi_2$layers have been grown in situ on a (100) Si substrate at temperatures near$ 600^{\circ}C$ by reactive chemical vapor deposition of cyclopentadienyl dicarbonyl cobalt, (Co(η(sup)5-C(sub)5H(sub)5) ($CO_2$). The growth kinetics of an epitaxial $CoSi_2$layer on al Si(100) substrate was investigated at temperatures ranging from 575 to $650^{\circ}C$. In initial deposition stage, plate-like discrete $CoSi_2$spikes were nucleated along the <111> directions in (100) Si substrate with a twinned structure. The discrete $CoSi_2$plates with both {111} and (100) planes grew into an epitaxial layer with a flat interface on (100) Si. For epitaxial $CoSi_2$growth on (100) Si, the activation energy of the parabolic growth was found to be 2.82 eV. The growth rate seems to be controlled by the diffusion of Co through the $CoSi_2$layer.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.5
• /
• pp.200-207
• /
• 2020

MoSi₂, (Mo_1/2W_1/2)Si₂, and WSi₂ powders were synthesized by self-propagating high-temperature synthesis (SHS) method. The synthesized powders were heat-treated at 500, 1,000, 1,200, 1,300, 1,400, 1,500 and 1,600℃ in ambient atmosphere. Oxidation of Mo-W silicide powder was found at low temperature of 500℃. XRD structure analysis and DTA/TG data showed that MoO₃ was formed with 500℃ heat treatment for 1 hour, and that it was α-cristobalite phase that was formed with 1200℃ heat treatment, not α-quartz phase which is commonly found and stable at room temperature. Existence of W accelerated decomposition at both low and high temperature. Fully sintered MoSi₂ and (Mo_1/2W_1/2)Si₂ specimen did not show decomposition or weight loss by oxidation, with 1 hour heat treatment at either low or high temperature. Notably, it was difficult to sinter WSi₂ because of oxidation reaction at low temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6151-6158
• /
• 2012

By the activation of environment-friendly river works, application of vegetation mats is increasing, however, evaluation techniques for hydraulic stability of vegetation mats are not presented. This study is conducted to develop the objective test method for vegetation mats. Two kind of vegetation mats are tested by the real scale experiments, and hydraulic quantities are measured and analyzed to evaluate acting shear stresses. Roughness and shear stress are evaluated by 1 D non-uniform model. After each tests, changes in mat surfaces and sub-soil are evaluated, and from these evaluation, 3 types of mat surface damages and 2 types of sub-soil damages are presented. In the study, the case in which some damages in mat surface don't cause loss of sub-soil, is presented to be in the stable condition. Appling this stable condition and acting shear stresses, permissible shear stresses of vegetation mats are evaluated, and the results show that the reinforced mat with wire netting has more permissible shear stress.