• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1057-1062
• /
• 2007

The purpose of this study is to find out design parameters of vibrating screen, such as particles motion, specific gravity, shape, and kinetic friction. In order to approach this problem, four materials of construction wastes, wood, styrofoam, concrete, and sand are used for dynamic modeling. To present friction between the particles material and tilt plates material, these particles model is applied in order to verify effectively. Generally, the vibrating screen is composed of three assemblies such as screen, wastes guide, supported of screen. This model regards vibrator as system of screen fixed tilt plates. The model is analyzed to present what kind of particles motion while the system is vibrating. and this vibration system has been implemented in a ADAMS dynamaic program. This modeling is consist of dynamic model separation state on particle size. This study make good technique to verify in theory.

• Journal of Biosystems Engineering
• /
• v.16 no.2
• /
• pp.178-187
• /
• 1991

In order to provide fundamental data for the achievement of safe environmental condition, investigation of the actual state of the nutriculture practices in Korea was carried out. The result obtained are summarized as follows. 1. Cultivation area of nutriculture was 6 ha and culture types included deep flow technique(43%), nutrient film technique(45%), gravel culture(6%), chaff charcoal culture(3%) and rockwool culture(3%). 2. Greenhouses were mostly made of pentite pipe frames and covered by polyethylene film, and culture beds were handy combination of cement blocks, concrete and styrofoam, which were not standard products. 3. Development of nutriculture system appropriate to our actual circumstances and improvement of establishments are required. 4. Since there was not farmhouse that performs the environmental measurement and environmental conditions of cultivation were very limited. sensor applied environmental control technology of nutriculture should be developed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.830-834
• /
• 2008

Resilient materials are generally used for the floating floors to reduce the floor impact sound. Dynamic stiffness of resilient material, which has the most to do with the floor impact sound reduction. The resilient materials available in Korea include EPS (Styrofoam), recycled urethane types, EVA (Ethylene Vinylacetate) foam rubber, foam PE (Polyethylene), glass fiber & rock wool, recycled tire, foam polypropylene, compressed polyester, and other synthetic materials. In this study, we tested floor impact sound reduction characteristic to a lot of kinds of resilient material. The result of test showed that the amount of the Light-weight impact sound reduction appeared by being influenced from this dynamic stiffness of resilient material. As the decreasing dynamic stiffness of resilient material, the impact sound reduction amount is increased, especially in the low frequency domain.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.721-727
• /
• 2000

Impedance method was carried out to design the electrode that can measure the void fraction of the bubbly flow in pool reservoir. To find out the optimum electrode shape, Styrofoam-tests were performed in a specially designed acrylic reservoir. Three kinds of electrodes were designed to compare the characteristics of water-air flow. The resistance was increased as the void fraction increased and the capacitance was decreased as the void fraction increased. The resistance is a main parameter to express the nature of the water-air flow in impedance method. Almost all the values of impedance were involved in resistance. The degree of deviation from the mean-resistance values showed reasonable results. Electrode type-I expressed excellent results among the three electrode shapes. The impedance values in void fraction 0-10% were similar to those of Maxwell's equation. But the impedance values in void fraction 10-20% were not similar to those of Maxwell' equation because of the edge effect near electrode.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.351-356
• /
• 1997

With the aid of advanced structural engineering, the construction of infrastructures has been recently accelerating to keep up with rapid economic growth. Construction activities and operation of transportation facilities cause civil petitions associated with vibration-induced damages or nuisances. As part of the decrease of vibration induced damage, the objective of this study is to develop vibration-controlled concrete with vibration-reduced materials, which can be recycled from obsolete materials, such as aged tires, plastics and etc. Appropriate mix proportion has been used for making 10 reinforced concrete panels with vibration-reduced materials, which have been tested to investigate on vibration reduction capability, based on the time and frequency domain analysis, and vibration velocity level analysis. Vibration-reduced mixtures are latex, styrofoam, rubber powder and plastic resin, which have been determined to by reduce vibration.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.4
• /
• pp.263-270
• /
• 2001

In stamping-die manufacturing, the first step is to build die patterns for lost wax casting process. A recent industry trend is to manufacture the die pattern using 3-axis NC machining. This study identifies technical considerations of the pattern machining caused by the characteristics of Styrofoam material, and proposes technical methods related to establishing a process plan and generating tool paths for optimizing the pattern machining. In this paper, the process plan includes the fellowing three items: 1) deter-mining a global machining sequence-a sequence of profile, top, bottom machining and two set-ups, 2) extracting machining features from a pattern model and merging them, and 3) determining a machining sequence of machining features. To each machining feature, this study determines the machining start point, generates the approach tool path, and proposes a tool path linking method fur reducing the distance of the cutter rapid motion. Finally, a smooth tool path generation and an automatic feedrate adjustment (AFA) method are introduced far raising the machining efficiency.

• Journal of the Korean Ceramic Society
• /
• v.27 no.6
• /
• pp.729-734
• /
• 1990

The microstructural dependence of thermal conductivity of a high-alumina (ca. 70%) heat-insulating frebricks(ca. 75%porosity) was investigated under special consideration of the tailored-pore shape effects. Pores different shape could be incorporated into the insulators through pore formers : Styrofoam produces spherical pores while saw dust results in parallel plate pores. Concerning the pore-shape effectiveness of thermal insulation, the specimen with irregular plate pores showed much lower values of heat conductivity than those with spherical pores, the values being 0.31 to 0.38 at $600^{\circ}C$ and 0.35 to 0.47 at 100$0^{\circ}C$, respectively. On the contrary, however, other material properties such as strength and softening temeprature under load were turned out to be better in the case of the spherical pores.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.223-225
• /
• 2000

일반적으로 많이 사용되는 고강도 스티로폼은 원료모분을 스팀발포기를 사용하여 수십배로 일차 발포한 후 금형에 넣어 스팀으로 성형한다. 이러한 스티로폼은 단열성이 뛰어난 장점이 있지만 강도가 약하여 내구성이 요구되는 재료로는 부적당하였다. 한편 자동생산공정에 사용되는 로봇 트레이는 고강도 정전기 방지 기능이 필요하게 되었고, 5배 정도의 저발포 스티로폼을 이용한 로봇 트레이가 일부 생산되고 있다. 스팀을 이용한 성형 가공의 경우 모분이 표면에서 발포 융착된 후 내부로 열이 잘 전달되지 못하여 내부 융착이 잘되지 않는 단점을 가지고 있다. 이 단점을 보완하기 위하여 물의 높은 유전율을 이용한 유전가열을 사용하여 내부 융착을 용이하게 시킬 수 있다. 본 연구는 원료모분을 3배이하로 일차 발포한 폴리스틸렌 원료를 이용하여, 스팀에 의한 성형이 아닌 고주파 유전가열을 이용한 성형 방법에 의하여 만들어진 성형물의 비젼과 문제점을 제시하였다. 본 연구에 사용한 고주파는 나무 집성가공에 많이 사용되는 13.6MHz를 사용하였고, 금형은 두랄루민 금형과 목형을 사용하여 시험하였으며, 이의 장단점 및 문제점을 비교하였다. 스팀성형가공에 비하여 내부융착이 훨씬 뛰어났으며, 일부 문제점을 보완하면 진보된 생산공정이 될 것으로 기대된다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.54-55
• /
• 2020

Recently, "The rules on the standards of evacuation and fire protection of buildings" require that non-burnable materials such as non-combustible and semi-non-combustible materials be used as the materials applied to the building's exterior walls, but styrofoam, which is a combustible material, has been applied a lot and became a social issue. In this study, we developed a non-combustible outer wall molding to secure construction and economic feasibility and free expression using CLC(CLC: Cellular Light-weight Concrete).

• Membrane and Water Treatment
• /
• v.14 no.4
• /
• pp.147-153
• /
• 2023

Urbanization has been causing such new pollutants as micro-plastic, thus the environmental impact of new pollutants on ecosystem is rapidly increasing. When it comes to micro-plastic, a representative artificial trace pollutant, its risk has been increased at a much faster rate, however the depth study associated with stormwater sediment and wetland was relatively rare. In this research, soil samples from storm water sediment were analyzed for distribution characteristics of micro-plastics in the J wetland (registered as Ramsar wetland, May 2021 and a representative environmental site in South Korea). Analyzed soil samples found approximately 201 ± 93 particle/kg (based on unit weight, Total micro plastic particles / Total Sample weight) micro-plastics in the samples. When considering the total quantitative numbers in stormwater sediment in the entire area of the J wetland, over 15,000 micro-plastics were estimated to be contaminating such area. In addition, in terms of qualitative numbers, micro-plastics were contaminating the J wetland with 94.7 % ratio of styrofoam type (43.9%) and polyethylene type (50.8%). These research results can be used as base data sets for controlling micro-plastics in the J wetland.