• Membrane Journal
• /
• v.28 no.1
• /
• pp.67-74
• /
• 2018

In the molecular dynamics study of polymeric membranes, it is very important to select the proper length of the polymer main chain because it requires a large number of constituent atoms and a long time to simulate the permeation behavior. In this study, we tried to investigate how the correlation between polymer main chain length and permeation behavior appears in actual molecular dynamics simulation results. Molecular dynamics were performed using the widely known commercial polymer Kapton(R) polyimide structure and the gas permeation behavior was simulated. The movement of the polymer main chain was not related to its length and the short main chain length did not act more actively. In addition, unlike the prediction that the end group of the polymer main chain is relatively easy to move, there are many cases where the atoms located at the middle of the polymer main chains have a higher movement than the atoms located at the end groups. Finally, permeabilities of the gas molecules was not affected by the length of the main chain and the end groups of the polymer, which indicates that the end effect should be carefully mentioned and followed by the verification process.

• Economic and Environmental Geology
• /
• v.49 no.4
• /
• pp.315-323
• /
• 2016

This study reports a gneiss dome in the Hongseong area, southwestern margin of the Gyeonggi massif. This gneiss dome, named here as 'Oseosan dome' because it is located around the Oseosan, the highest peak along the western coastal area, is composed mainly of the Neoproterozoic to Paleozoic ortho- and paragneiss, mafic metavolcanic rock, and metadolerite. Migmatization affected these rock units, in which leucocratic(granitic) materials derived from anatexis frequently occur as patch and vein parallel to or cutting through internal foliation. The Oseosan dome shows overall concentric geometry and outward-dipping internal foliation, but also partly complicatedly changeable or inward-dipping foliation. Taking available petrological and geochronological data into account, the Oseosan dome is interpreted to be exhumed quickly into the upper crustal level during the Late Triassic, accompanied in part with anatexis and granite intrusion. In addition, extensional shear zone intruded by the Late Triassic synkinematic granite and sedimentary basin have been reported around the Oseosan dome. These evidences possibly suggest that the Oseosan dome formed in closely associated with the Late Triassic extensional movement and diapiric flow. Alternatively, 1) thrust- or reverse fault-related doming or 2) interference between independent folds during structural inversion of the Late Traissic to Middle Jurassic sedimentary basin can be also considered as dome-forming process. However, considering the northern limb of the Oseosan dome, cutting by the Late Traissic granite, and the southern limb, cutting by contractional fault reactivated after the Middle Jurassic, it is likely that the domal structure formed during or prior to the Late Triassic.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.1-9
• /
• 2009

A doll created by various materials is a miniature based on human model, and it has been one of components in a puppet show to take some responsibility for human's culture activity. However, demand and supply keeps on the decrease in the puppet show industry, since professional puppeteer has been reduced rapidly, and also it is difficult to initiate into the skill. Therefore, many studies related Robotic Marionette for automation of puppet show have been internationally accompanied, and more efficient structure design and process development are required for better movement and express of puppet with motor based controller. In this research, we suggest the effective way to enable to express the marionette's motion using motion data based on motion capture and 3D graphic program, and through applying of 3D motion data and proposal of simulation process, it will be useful to save time and expenses when the Robotic Marionette System is practically built.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.6
• /
• pp.603-611
• /
• 2016

Research and development of mineral-resource-related products has progressed with the increased need to develop mineral resources. The DTH hammer is a resultant product. However, owing to particular work conditions of underground drilling, it is difficult to obtain direct data on the DTH hammer. A DTH drill rig requires a significant amount of money and time for actual testing. This thesis aimed to resolve this problem by using CAE. In a previous paper, the structure of the DTH hammer and its movement were analyzed, and a standard model based on simulation was proposed. Then, experimentation and comparison verification were conducted. In this paper, by using an experimental design method, we derived a control factor of the impact force and efficiency of the DTH hammer and attempted to optimize the design. As a result, the impact energy increased by 14.9%, and the efficiency increased by 3.3%.

• International Commerce and Information Review
• /
• v.14 no.2
• /
• pp.349-367
• /
• 2012

Recently, the global paradigm on the economic structure has been changed from the price-oriented borderless competition toward the sustainable quality movement due to the ever-increasing global warming and environmental issues. Since Korea hosted the global 20 summit in 2010, it has promoted the green growth policies and asked for the other countries to participate in. Unfortunately, it is not easy to figure out the green growth or green productivity because the economic performance has a side effect of environmental pollution such as CO2 emission. This paper aims to analyzes the methodological comparison for all the related issues with green productivity and suggests the new paradigm of global Malmquist-Lundberger index (GML) as the most flexible field and performance-oriented criteria to measure the green productivity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1807-1814
• /
• 2014

Natural disaster has been hard to prevent the occurrence of itself, thus in order to reduce the economic damages and loss casualties, it is important to be prepared in cases that the disasters should occur in advance. Interest of the related project to prevent various natural disasters has been grown along with an investment in Korea. Along with this movement, when investments related to natural disaster prevention projects were built on, the post evaluation that can verify the ripple effects of those investments on the community should be emerging as an essential task. For evaluating the effects of public investment projects such as natural disaster prevention projects in this study, the related researches would continue through qualitative analyses, for example, cost-benefit analysis. Even the qualitative analysis alone cannot fully explain the effects of those projects, the diverse methods of analyzing and evaluating those effects might not have been presented in those fields. For the post evaluation of natural disaster prevention projects through the qualitative analysis, this study derived subjects that had effects on the post evaluation of natural disaster prevention projects. Also, employing the structural equation modeling (SEM), the causation between post evaluation subjects and the effects of projects were quantitatively analyzed, and the weighting factors of evaluation items were calculated respectively. Based on these results, post evaluation index formula was proposed for the natural disaster prevention projects in Korea.

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.338-343
• /
• 2007

BOLD T2*-weighted MR images reflects cortical blood flow and oxygenation alterations. fMRI study relies on the detection of localized changes in BOLD signal intensity. Since fMRI measures the very small modulations in BOLD signal intensity that occur during changes in brain activity, it is also very sensitive to small signal intensity variations caused by physiologic noise during the scan. Due to the complexity of movement of various organs associated with heart beat, it is important to reduce cardiac related noise rather than other physiological noise which could be required with relatively simple method. Therefore, a number of methods have been developed for the estimation and reduction of cardiac noise in fMRI study. But, each method has limitation. In this study, we proposed a new estimation method for brain activities influenced by blood pulsation effect using regression analysis with blood pulsation signal and the correspond slice of fMRI. We could find out that the right anterior cingulate cortex and right olfactory cortex and left olfactory cortex were largely influenced by blood pulsation effect for new method. These observed areas are mostly on the structure of anterior cerebral artery in the brain. That is convinced with that our method would be valid and our new method is easier to apply in practice and reduce computational burden than the retrospective method.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.269-281
• /
• 2021

Land creeping is the imperceptibly slow, steady, downward movement o f slope-forming soil or rock. Because creep-related failures occur frequently on a large scale without notice, they can be hazardous to both property and human life. Korea Forest Service has operated the prevention and response system from land creeping which has been on the rise since 2018. We categorized and proposed three survey steps (e.g., preliminary, regional, detailed) for investigation of creeping susceptibility site with a focus on geophysical mapping of a selected test site, Yongheung-dong, Pohang, Korea. The combination of geophysical (dipole-dipole electrical resistivity tomography and reciprocal seismic refraction technique, well-logging), geotechnical studies (standard penetrating test, laboratory tests), field mapping (tension cracks, uplift, fault), and comprehensive interpretation of their results provided the reliable information of the subsurface structures including the failure surface. To further investigate the subsurface structure including the sliding zone, we performed high-resolution geophysical mapping in addition to the regional survey. High-resolution seismic velocity structures are employed for stability analysis because they provided more simplified layers of weathering rock, soft rock, and hard rock. Curved slip plane of the land creeping is effectively delineated with a shape of downslope sliding and upward pushing at the apex of high resistive bedrock in high-resolution electrical resistivity model with clay-mineral contents taken into account. Proposed survey steps and comprehensive interpretation schemes of the results from geological, geophysical, and geotechnical data should be effective for data sets collected in a similar environment to land-creeping susceptibility area.

• Journal of the Korean Geophysical Society
• /
• v.2 no.2
• /
• pp.91-99
• /
• 1999

A high-resolution seismic profile acquired across the northeastern boundary of the Pungam Basin, one of the Cretaceous sedimentary basins in Korea, has been interpreted to delineate subsurface geological structures across the basin boundary. We identified boundary faults and unconformity surfaces of the basin and divided sediment body into three seismic depositional units (Units I, II, and III from youngest to oldest). Inferred from fault geometry and type, northeastern part of the Pungam Basin has been formed by a strike-slip fault whereas the normal faults near the boundary were formed by transtensional movement along a fault zone. A 350-400 m thick sediment layer is overlying the Precambrian gneiss. Bedding planes of Unit III are dipping westward and are closely related to an anticline in the acoustic basement. Unit II is also tilted westward, suggesting that the eastern part of the fault zone was uplifted after deposition of lower part of the sedimentary body. Afterward, the uplifted sediment layers were eroded and transported to the western part of the basin. Chaotic reflection pattern of sedimentary Units II and III may suggest that strike-slip movement along the fault zone deformed basin-filled sediments.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.135-142
• /
• 2016

Although growth potential of trade between Korea and the GCC region has existed in various fields through economic and business cooperation, few data and practical study related with trade structure and cooperation between Korea and GCC region have been found and the potential for further economic expansion has not been extensively explored. In this sense, this study is to analyze trade flows between Korea and GCC region countries(Saudi Arabia, Unites Arab Emirates, Qatar) using trade intensity index, trade complementarity index and special country bias index, identify potential for further expansion of Korea's trade into the GCC region and further propose the implication of FTA between mutual countries. Our analysis of trade flows also demonstrates that there is a high level of trade complementarity between Korea and GCC region. It means that increase of trade complementarity and special country bias come from removing not only trade barrier and increasing but also capital movement. Especially, the study reveals that there is an untapped potential for Korea to increase its exports to Saudi, based on the highest complementarities. Export expansion between Korea and Saudi through FTA will create new opportunity in near future.