• Journal of the Korean Data and Information Science Society
• /
• 제18권2호
• /
• pp.489-506
• /
• 2007

Gene structure prediction, which is to predict protein coding regions in a given nucleotide sequence, is the most important process in annotating genes and greatly affects gene analysis and genome annotation. As eukaryotic genes have more complicated structures in DNA sequences than those of prokaryotic genes, analysis programs for eukaryotic gene structure prediction have more diverse and more complicated computational models. There are Ab Initio method, Similarity-based method, and Ensemble method for gene prediction method for eukaryotic genes. Each Method use various algorithms. This paper introduce how to predict genes using HMM(Hidden Markov Model) algorithm and present the process of gene prediction with well-known gene prediction programs.

• 한국건설관리학회논문집
• /
• 제13권2호
• /
• pp.91-101
• /
• 2012

공공아파트 프로젝트의 기획단계에서 수행되는 적정 공사비 예측은 기획부터 유지관리까지 전(全) 단계에 걸쳐서 영향을 미치게 되므로 명확한 예측기준 및 방법이 제시되어야 한다. 그러나 현재까지 다양한 다중회귀모델을 활용한 공사비 예측 방법이 개발되어 왔으나, 정성변수를 포함하여 공사비를 예측하는 방법에 대한 연구는 부족한 상황이다. 따라서 본 연구에서는 기획단계 활용을 위한 정성변수를 포함하는 공사비 예측모델을 개발하고자 하였다. 이를 위하여 공사비 영향요인을 분석 및 추출하고, 회귀분석을 위한 독립변수를 선정하였다. 그리고 정성변수를 포함하는 공사비 예측모델을 개발하며 사례적용을 통한 검증을 실시하였다. 개발된 공사비 예측모델과 "RESAMPLING 기법"을 사용하여 구조형식별 공사비 가산비율을 제시하였다. 본 연구에서 제시한 더미회귀모델과 가산비율을 활용하면, 일반적인 공사비 예측과 함께 동일한 평형, 세대수, 연면적에서 평면형식과 구조형식을 변경시켰을 때의 공사비 예측이 가능할 것으로 기대된다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권4호
• /
• pp.71-77
• /
• 1995

Electrical fire in residential, commercial, and industrial areas occupies 40 percent of overall fire accidents as of the year of 1994. The causes of most electrical fires were studied and, based on this investigation, the principle of the early detection or prediction of the electrical fires is developed. The basic principle is to early detect electrical arcs or sparks caused by faulty connections and insulation failures. the structure of the prediction system based on microcontroller technique is presented.

• Wind and Structures
• /
• 제9권5호
• /
• pp.387-396
• /
• 2006

This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to compare with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).

• 콘크리트학회논문집
• /
• 제11권6호
• /
• pp.89-100
• /
• 1999

Service life of concrete structures that are exposed to the environmental attack is largely influenced by the corrosion of reinforcing bare due to the chloride contamination. Chloride ions penetrate continuously into concrete from the environment, and chloride diffusion velocity is governed by a mechanical steady stage. In this study, a method is developed to predict corrosion initiation of reinforcing bars in the sea-shore structures, based on governing equations that take into account the diffusing of chloride ions and a mechanical steady state. As a result of this study, Corrosion Prediction System (CPS) is developed, and it can be used to determine an optimal time for repair and rehabilitation actions need to be taken. Futhermore, CPS assists the concrete mixing structures by predicting of chloride concentrations in concrete mixture, exposed to salt concentrations and service environment.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.269-273
• /
• 1998

The failure of material structures or mechanical system is considered as a direct or indirect result of fatigue. In the design of mechanical structure for estimating of reliability, the prediction of failure life is the most important failure mode to be considered. However, because of a complicated behavior of fatigue in mechanical structure, the analysis of fatigue is in need of much researches on life prediction. This document presents a prediction of fatigue life of the SAPH45 steel, which is extensively for vehicle frame. The method using lethargy coefficient and stress distribution factor at pediction of fatigue life based on the consideration of the failure characteristics from the tensile test should be provided in this study.

• 정보과학회 논문지
• /
• 제41권11호
• /
• pp.900-910
• /
• 2014

다시점 비디오는 하나의 3차원 장면을 여러 시점에서 다수의 카메라로 촬영 영상으로 다시점 비디오 부호화의 계산량은 카메라 수에 비례하여 증가한다. 본 논문에서는 다시점 비디오 부호화의 계산량을 줄이면서 영상 화질을 유지하는 예측 구조와 움직임 추정 기법을 제안한다. 제안한 개선된 예측 구조는 B계층 최대 인덱스 그리고 각 Bi계층의 화면수를 고려하였다. 제안한 움직임 추정 기법은 계층적인 탐색 기법으로 수정된 다이아몬드 탐색 패턴, 점진적인 다이아몬드 탐색 패턴 그리고 수정된 래스터 탐색 패턴으로 구성된다. 제안한 예측 구조와 움직임 추정 기법의 성능을 Fraunhofer-HHI의 계층적 B화면 구조와 TZ 움직임 추정 기법을 사용한 JMVC 참조 모델의 성능과 비교한 경우, 영상 화질과 발생 비트량은 비슷하지만 다시점 비디오 부호화의 계산량을 40~70% 줄인다.

• 방송공학회논문지
• /
• 제11권4호
• /
• pp.420-430
• /
• 2006

본 논문에서는 다시점 동영상 부호화를 위한 참조 소프트웨어의 부호화기 성능을 높이기 위해 가변형 다시점GOP 예측 구조로 부호화 하는 방법을 제안한다. 다시점 동영상 부호화를 위한 참조 소프트웨어에서는 고정된 시공간 예측구조를 사용하여 다시점 동영상을 부호화한다. 그러나 다시점 동영상 부호화의 성능은 영상의 특성에 따라 예측 부호화 구조를 가변적으로 변경하는 것에 영향을 받는다. 따라서 다시점 동영상의 전역 변이를 이용하여 부호화의 기준 시점을 정하고 카메라 간의 간격을 고려하여 B-픽쳐의 개수를 조절하여 영상의 특성에 따라 다시점 동영상의 부호화 단위인 다시점GOP 예측 구조를 가변적으로 적용하는 방법을 제안한다. 실험 결과에서 제안된 가변형 다시점GOP 예측구조의 부호화 방법이 기존의 참조 소프트웨어보다 우수한 성능을 보여줌을 확인하였다. 제안 예측 부호화 구조는 기존의 부호화 구조와 비교하여 7.1%의 비트량 감소를 보였다.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.22-27
• /
• 2010

A prediction performance of Fire Dynamics Simulator(FDS) developed by NIST for the diffusion flame structure was validated with experimental results of a laminar slot jet diffusion flame. Two mixture fraction combustion models and two finite chemistry combustion models were used in the FDS simulation for the validation of the jet diffusion flame structure. In order to enhance the prediction performance of flame structure, DNS and radiation model was applied to the simulation. The reaction rates of the finite chemistry combustion models were appropriately adjusted to the diffusion flame. The mixture fraction combustion model predicted the diffusion flame structure reasonably. A 1-step finite chemistry combustion model cannot predict the flame structure well, but the simulation results of a 2-step model were in good agreement with those of experiment except $CO_2$ concentration. It was identified that the 2-step model can be used in the investigation of flame suppression limit with further adjustment of reaction rates

• Geomechanics and Engineering
• /
• 제22권1호
• /
• pp.25-33
• /
• 2020

In metropolitan areas, the quantity and density of the underground structure increase rapidly in recent years. Even though most damage incidents of the underground structure were minor, there were still few incidents causing a great loss in lives and economy. Therefore, the safety evaluation of the underground structure becomes an important issue in the disaster prevention plan. Liquefaction induced uplift is one important factor damaging the underground structure. In order to perform a preliminary evaluation on the safety of the underground structure, simplified prediction equations were introduced to provide a first order estimation of the liquefaction induced uplift. From previous studies, the input motion is a major factor affecting the magnitude of the uplift. However, effects of the input motion were not studied and included in these equations in an appropriate and rational manner. In this article, a numerical simulation approach (FLAC program with UBCSAND model) is adopted to study effects of the input motion on the uplift. Numerical results show that the uplift and the Arias Intensity (Ia) are closely related. A simple modification procedure to include the input motion effects in the Sasaki and Tamura prediction equation is proposed in this article for engineering practices.