• Journal of Ocean Engineering and Technology
• /
• v.17 no.4
• /
• pp.31-36
• /
• 2003

In case of this thick rolling-steel for a multistory building, a large oil-drilling structure, a large vessel, a bridge and so on, Lamella Tearing around the welded joint zone is the most serious problems. In order to prevent Lamella Tearing, not only is choice of material important, but also the comprehensive investigation for the structural design and the construction. The Lamella Tearing that is a staircase-shape occurs due to the contraction stress to the thickness direction of the plate and has the character that the cracks progress along the elongated inclusion by rolling. In general, because cracks occur at the heat affected zone and around HAZ, it is necessary to establish the safety and the confidence of the welded structure to restrain the welding defect such as Lamella Tearing. The mechanical approaches are the easier and more economical than the approaches of the material and the construction method. In addition, the appropriate welding profile and the optimum welding condition contribute toward the improvement of the productivity and influence on the standardization of the manufacturing technology.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.1-11
• /
• 2005

A bi-level damage detection algorithm that utilizes the dynamic responses of the structure as input and neural network (NN) as pattern classifier is presented. Signal anomaly index (SAI) is proposed to express the amount of changes in the shape of frequency response functions (FRF) or strain frequency response function (SFRF). SAI is calculated using the acceleration and dynamic strain responses acquired from intact and damaged states of the structure. In a bi-level damage identification algorithm, the presence of damage is first identified from the magnitude of the SAI value, then the location of the damage is identified using the pattern recognition capability of NN. The proposed algorithm is applied to an experimental model bridge to demonstrate the feasibility of the algorithm. Numerically simulated signals are used for training the NN, and experimentally-acquired signals are used to test the NN. The results of this example application suggest that the SAI-based pattern recognition approach may be applied to the structural health monitoring system for a real bridge.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.57-65
• /
• 2006

This paper presents hybrid structural damage monitoring system which performs both global damage assessment of structure and damage detection of local structural joints. Hybrid damage monitoring system is composed of vibration-based technique and electro/mechanic impedance technique. Vibration-based technique detects global characteristic change ot structure using modal characteristic change of structure, and electro/mechanical impedance technique detects damage existence of local structural joints using impedance change of PZT sensor. For the verification of the proposed hybrid monitoring system, a series of damage scenarios are designed to loosened bolts situations of the structural joints, and acceleration response and impedance response signatures are measured. The proposed hybrid monitoring system is implemented to monitor global damage-state and local damages in structural joints.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.2
• /
• pp.92-98
• /
• 2015

Recently, buildings tend to be large size, complex shape and functional. As the size of buildings is becoming massive, the need for structural health monitoring (SHM) technique is increasing. Various SHM techniques have been studied for buildings which have different dynamic characteristics and influenced by various external loads. "Abnormal behavior point" is a moment when the structure starts vibrating abnormally and this can be detected by comparing between before and after abnormal behavior point. In other words, anomalous behavior is a sign of damage on structures and estimating the abnormal behavior point can be directly related to the safety of structure. Abnormal behavior causes damage on structures and this leads to enormous economic damage as well as damage for humans. This study proposes an estimating technique to find abnormal behavior point using Hilber-Huang Transform which is a time-frequency signal analysis technique and the proposed algorithm has been examined through laboratory tests with a bridge model using a shaking table.

• Journal of the Korea Furniture Society
• /
• v.17 no.2
• /
• pp.57-68
• /
• 2006

This study understands rockers of today and supplies basic data of design and manufacture studying pattern change of rockers arisen in West, there is the purpose. Also, this study is investigated by dividing theoretical background of rockers, 7 kinds of American traditional rockers and European rockers from 18th century to opening part of 20th century and contemporary rockers since 20th century. The theoretical background and the style of 2 rockers (Windsor rocker, Boston rocker) were investigated to study the stylistic changes of rockers. Originally a rocker was invented by a European farmer around 1700. It developed to a household which equip practicality and comfortablness in the United States than Europe. Early rockers in a primal form appeared in the 1740s in the United States. American early rockers connected skate to established chair bridge. Rockers are deep connection with family's emotion. Rockers can provide playing functions for children and medically treating functions for adults. Windsor Rockers developed by attaching skate is mammy bench and according to shape of back form bow or hoop-back rocker, birdcage rocker, comb-back rocker. Windsor Rockers formed peculiar American tradition of craftsman furniture through structure that have a unique back of a chair and round seat. Boston Rockers were the first chairs made by mass production method. They show a particular shape with S-curve style seat and rectangular crest at the upper part of the back. Often Crests were decorated by stenciled pattern with curled leaves such as rosettes and scrolled designs.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.2
• /
• pp.17-29
• /
• 1997

Single-mode spectral analysis method is usually applied to a small-scale bridges with the simple geometric shape and uses only fundamental period to estimate the elastic earthquake forces and the displacements of the substructure. On the other hand, multi-mode spectral analysis method may be used instead if the possibilities of potential damage are developed when considering significance, scale, and geometric shape of briages. Since the dynamic responses of bridge can be significantly different depending on the modeling techniques for the restraint and support conditions etc, it may be misled to the unexpected results. In this study the dynamic analysis program which can model and analyze the bridge as a two- or three-dimensional framed structure is developed and verified with the results of other reliable program. Using this program together with the post processor, the designer can easily and readily obtain the reponses(moments, base shears, and displacements)of bridges necessary to design purpose. And further from the analysis results according to the variations of type, scale, and restraint and supprot conditions of bridges including sectional properties, applications of the effective and desirable seismic design are presented.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.3
• /
• pp.75-84
• /
• 2008

The purpose of this research is to find the visual characteristics and geographic structure in a landscape of mountains in Yangsan City. In order to carry out this study, 40 view points of 6 mountains in Yangsan City were selected to experience the mountainscape. The results are as follows. The mountainscape of Yangsan City was confirmed from the view point to the object of view as ranging in middle distance reverse, the angle of elevation 11${\sim}13^{\circ}$ which give the impression of confronted to the mountain, and the horizontal angle 50${\sim}90^{\circ}$ which gives the impression of vastness. This shows that mountainscapes are perceived impressively when seeing the mountain with the meaning to feel the texture of the mountain as a confrontational relationship rather than a pictorial relationship. The geographic structure of the view point which occurs in scenes of impressive experience is classified into eight types and its characteristics are investigated. The first type is corridor, and it emerges in a long narrow linear structure made from the surrounding environment with buildings or street trees. The second is tunnel in which a vision and light hidden while passing underneath a bridge, high-level road, or inside a tunnel can be seen. Third, the maze is formed by the mountain shape. The hill spur emerges when the direction of traffic changes after turning the coner of a building or mountain edge. The hill ground emerges at the top of a hill slope. Next, parallel emerges when the observer and the mountain are in the same direction of process. Confrontation occurs when confronting an isolated mountain. Finally, the view point emerges when passing through major points such as a bridge or square and the boundary of a village or city. This research arranged visual conditions that create impressive mountainscapes. Geographic characteristics in terms of Types that make possible to experience mountainscapes were described. The results of this research will be basic data collected for the management and preservation of mountainscapes and for landscape effect evaluation. Furthermore, this research suggests theoretical evidence to preserve and manage geographic structures that create view experiences as well as to preserve the landscape in terms of view points.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.6
• /
• pp.691-704
• /
• 2011

This paper presents an investigation on the ultimate behavior of steel cable-stayed bridges in the construction stage, considering various geometric nonlinearities and material nonlinearities. To numerically determine the state of cable-stayed bridges in the construction stage, initial shape analysis and construction stage analysis via backward process analysis were done sequentially. Then nonlinear analysis of the state under the construction load condition, considering the weight of the derrick crane and the key segment of the girder loaded onto the tip of the center span, was performed to investigate the ultimate behavior of the structure. The effects of the girder-mast stiffness ratio, the cable-arrangement types, and the area of the stay cables on the ultimate behavior were also extensively investigated. Moreover, the results of the ultimate analysis, considering both geometric nonlinearities and material nonlinearities, were compared with the results of the geometric nonlinear analysis, for a more meaningful investigation of the ultimate behavior of steel cable-stayed bridges in the construction stage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.33-42
• /
• 1987

Grid structures are extensively used in bridge and slab strucures. When the elements are assembled for the entire structure the number of degree of freedom may be very large and thus, the stiffness, mass, and damping matrices become of large dimension. Undoubtedly, determining natural frequencies and mode shapes of such structures are complicated and require large computer costs. For these reasons various eigenvalue economizer procedures have been developed, which serve to reduce the number of degree of freedom. This paper proposes an economic method of dynamic analysis of grid stuctures using static and dynamic condensation techniques. The accuracy and economy of this method are investigated by comparing some results of model analysis of N-degree of freedom. It has been shown that the method achieves remarkable economy at only a little cost of accuracy.

• Particle and aerosol research
• /
• v.12 no.4
• /
• pp.127-134
• /
• 2016

A multiwall carbon nanotube (MWCNT)/graphene (GR) composite was synthesized for an enhanced supercapacitor. Aerosol spray pyrolysis (ASP) was employed to synthesize the MWCNT/GR composites using a colloidal mixture of MWCNT and graphene oxide (GO). The effect of the weight ratio of the MWCNT/GO on the particle properties including the morphology and layered structure were investigated. The morphology of MWCNT/GR composites was generally the shape of a crumpled paper ball, and the average composite size was about $5{\mu}m$. MWCNT were uniformly dispersed in GR sheets and the MWCNT not only increase the basal spacing but also bridge the defects for electron transfer between GR sheets. Thus, it was increasing electrolyte/electrode contact area and facilitating transportation of electrolyte ion and electron in the electrode. Electrochemical data demonstrate that the MWCNT/GR (weight ratio=0.1) composite possesses a specific capacitance of 192 F/g at 0.1 A/g and good rate capability (88% capacity retention at 4 A/g) using two-electrode testing system.