• Wind and Structures
• /
• 제19권3호
• /
• pp.233-247
• /
• 2014

Vortex-induced oscillation is a type of aeroelastic phenomenon, to which extended structures such as long-span bridges are most susceptible. The vortex-induced vibration (VIV) behaviors of a concerned bridge were investigated conventionally in virtue of wind tunnel tests on string-mounted sectional models. This necessitates the building of a linkage between the response of the sectional model and that of the prototype structure. Although many released literatures have related to this issue and provided suggestions, there is a lack of consistency among them. In this study, some theoretical models describing the vortex-induced structural motion, including the linear empirical model, the nonlinear empirical model and the modified (or generalized) nonlinear empirical model, are firstly reviewed. Then, the concept of equivalent mass density is introduced based on the principle that an equal input of energy should result in identical structural amplitudes. Based on these, the theoretical linkages between the amplitude of a section model and that corresponding to the prototype bridge are discussed with different analytical models. Theoretical derivation indicates that such connections are dependent mainly on two factors, one is the presupposed shape of deformation, and the other is the theoretical VIV model employed. The theoretical analysis in this study shows that, in comparison to the nonlinear empirical models, the linear one can result in obvious larger estimations of the full bridges' responses, especially in cases of cable-stayed bridges.

• 한국강구조학회 논문집
• /
• 제16권2호통권69호
• /
• pp.285-293
• /
• 2004

사회 기반 특수 시설로서 케이블을 이용한 현수교는 완공 후에 일반적인 교량 보다 더 신중한 안전점검 및 유지관리가 필요하다. 그러나, 교량의 설계 및 유지관리를 위한 구조해석은 구조체의 단순화된 기하학적 형상만을 고려하고 있다. 특히 강상판을 포함한 교량 구조물의 해석 모델링은 쉽지 않다. 본 논문에서는 완성계 현수교에 대한 행거 부재의 고유진동수와 전산해석을 통해 구조적 거동과 성능을 평가하였다. 전산해석의 정확도를 높이기 위해 해석 모델에 뼈대 구조물과 강상판을 고려하였다. 또한, 측정된 행거 장력과 상시 진동시에 측정된 구조물의 고유진동수 및 차량 재하시험 결과를 해석에 적용하였다. 결과로서, 제안된 알고리즘에 의한 예상 구조거동은 실제 구조물에서 측정된 자료와 매우 유사한 결과를 보였다. 또한, 내륙에 상륙한 태풍 매미에 의해 측정된 자료를 적용한 결과, 해석모델이 구조물의 예비설계 및 유지관리에 효과적으로 적용될 수 있음을 확인하였다.

• 한국조경학회지
• /
• 제35권5호
• /
• pp.82-91
• /
• 2007

Currently, bridges are regarding as the structure with formative, scenic and environmental values more than their function as simple passageways. Because an attempt to work on the diversity of the bridge types and installation of the large structures on bridge are part of the project of the regional amenity enterprises, a study that harmonizes bridges with landscape is needed at this point in time. This background can influence the direction of bridge landscapes that considers local features by analysis of visual preferences on a bridge simulated scene. The results were as follows: analyzing the change of the simulated landscape image, forest landscape are damaged by the input of a bridge which was natural, harmonic and intimate. On the other hand, when a bridge was inserted into the ocean landscape, it was thought to improve the ocean landscape, especially, upper part form of arch bridge various or suspension bridge were improved in polished and various image. The insertion of a bridge into an urban landscape change from a negative image to a beautiful, harmonic and attractive image. The intimate, harmonic and natural image of a rural landscape was damaged by inserting a bridge. As analysis result about change of landscape preference by input of bridge, there is difference between before and after as input the bridge, and bridge influences as main object in the simulated scene. Visual preference was the highest in the ocean landscape, and the lowest in the suspension bridge in the rural landscape. The complicated shape of bridge follows on the background type difference certainly appear. Thee simulated scene preference except the urban landscape of the simulated scene fell generally Especially, fall of preference of girder bridge in the forest and ocean landscape, suspension bridge in the rural landscape appeared notedly.

• 자원리싸이클링
• /
• 제13권3호
• /
• pp.37-42
• /
• 2004

폴리염화비닐(PVC)을 0∼2M NaOH 수용액 중에서 반응온도 $200∼250^{\circ}C$, 반응시간 0∼5시간으로 수열 처리한 경우 탈염화수소한 PVC 잔류물의 형상과 구조를 조사했다. 잔류물의 형상은 NaOH 농도에 의해 크게 변화하였다. 수중에서는 잔류물이 응집하고, 표면에서는 약 10$mu extrm{m}$이하의 세공이 생성되었다. 또한 잔류물의 내부는 총총한 망상구조로 되어 있었다. 반면에 NaOH 수용액 중에서는 잔류물의 응집이 거의 관찰되지 않았고 비교적 구상이었다. 그리고 $250^{\circ}C$에서 수중과 NaOH 수용액 중에서의 잔류물의 IR Spectrum을 관찰한 결과 C=C 이중결합에 의한 흡수피크 및 방향환의 생성이 나타났다. 폴리염화비닐을 NaOH용액으로 탈염화수소처리시 잔류물에서는 분자 내 및 분자간에서 환화반응 또는 가교반응이 일어나는 것을 알 수가 있었다.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.66-71
• /
• 2003

The release of residual stress by mechanical loading and unloading is often performed in the fabrication of box structure fur steel bridge. The proper degree of loading and unloading is significant at release method of residual stress by mechanical loading because that degree is changed by material and geometric shape of welded structure. Therefore, the simulation model that could exactly analyze the release of residual stress by mechanical loading is to be necessary. In this study, the non-linear behavior of weldments under external loading and unloading, such as the decrease and increase of structure stiffness, was investigated by monitoring of nominal stress and strain. Tensile loading and unloading test and the proper degree of stress relaxation was measured by sectioning technique using strain gauge. Analysis model that is indispensable for the effective application of MSR method was established on the basis of test and measurement result.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.319-329
• /
• 2018

The field around additional cutout of the floor beam web in orthotropic bridge deck was subjected to high stress concentration, especially the weld toe between floor beam and U shaped rib and the free edge of the additional cutout. Based on different considerations, different geometrical parameters of additional cutout were proposed in European, American and Japanese specifications, and there remained remarkable differences among them. In this study, considering influence of out-of-plane deformation of floor beam web and U shaped rib, parameter analysis for additional cutout under typical load cases was performed by fine finite element method. The influence of additional cutout shape and height to the stress distribution around the additional cutout were investigated and analyzed. Meanwhile, the static and fatigue test on this structure details was carried out. The stress distribution was consistent with the finite element analysis results. The fatigue property for additional cutout height of 95mm was slightly better than that of 61.5 mm.

• 생명과학회지
• /
• 제9권4호
• /
• pp.460-465
• /
• 1999

In the giant freshwater prawn Macrobrachium rosenbergii, the paired testes were united by the testes bridge in a H-shape. During mating male discharged two hemispermtophores from right and left genital pore and they were joined and formed a compound spermatophore in peach shape. Hemispermatophore was considered to be produced at proximal and middle vas deferens region. The compound spermatophore consisted of an eosinophilic inner matrix, a basophilic outer matrix and paired sperm mass burried in the basophilic matrix. The size of compound spermatophore was 6.4∼ 9.3 mm in length and 2.4∼5.1 mm in width regardless of carapace length. After the spermatophore was deposited on female's ventral sternum behind of 5th pereiopod, it was moved to the ventral surface of 3rd and 4th pereiopods by means of the beating of male's 1st and 2nd pleopods.

• 전산구조공학
• /
• 제9권4호
• /
• pp.107-115
• /
• 1996

변위응답은 교량구조의 진동특성을 결정하는데 중요한 인자 중의 하나이다. 계측된 가속도 데이타를 진동수 영역에서 적분하여 변위응답을 경제적이고 합리적으로 구할 수 있다. 이를 위해 계측된 가속도 데이타를 이산화하기 위해 적절한 표본추출 진동수가 제시되었다. 캔틸레버 보를 이용한 실내시험에서 직접 계측된 변위와 적분된 변위는 서로 잘 일치하였다. 평가된 변위응답으로부터 구한 모우드 형상도 해석치와 근접하므로 개발된 방법은 실제로 효율적으로 사용될 수 있음을 입증하였다.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.31-41
• /
• 2016

홍수 시 하천을 따라 이동하는 유송잡물로 인해 교량을 비롯한 구조물 피해가 급증하고 있다. 따라서 본 연구에서는 유송잡물 저감시설인 수직분리대, 우회말뚝, 스위퍼를 제작하여 실험수로에서 저감시설 유무에 대한 집적실험을 실시하였다. 수직분리대는 교량에 집적되는 유송잡물에 평행 흐름을 발생시켜 이를 통과시키는 저감시설로써 목재를 이용해 제작하였으며, 우회말뚝은 유송잡물의 방향을 우회시키는 방식으로 강파이프를 이용해 제작하였다. 스위퍼는 스크류 형태의 원통형 구조물이 흐름에 의한 자력 회전으로 유송잡물을 통과시키는 방법으로 아크릴을 이용하여 제작하였다. 실험은 유송잡물의 경도 및 투하 방법에 따른 집적 정도를 분석하여 저감시설의 집적률을 비교하는 방법으로 수행하였으며 5회 반복실험을 수행하였다. 실험결과 저감시설의 종류, 유송잡물 형태 등에 따라 차이가 있는 것으로 나타났으며 초기 유송잡물이 집적되는 형태에 따라 크게 좌우되는 경우가 많았다. 교량에 대한 직접적인 저감효과는 우회말뚝, 스위퍼, 수직분리대 순으로 나타났지만 우회말뚝의 경우 말뚝에 직접 집적되는 유송잡물로 인하여 흐름교란, 수위 및 하상변동, 말뚝의 유실 등으로 인한 피해가 발생할 수 있으므로 이를 고려한 설계가 필요하다.

• Structural Monitoring and Maintenance
• /
• 제2권1호
• /
• pp.77-93
• /
• 2015

The idea of using measured dynamic characteristics for damage detection is attractive because it allows for a global evaluation of the structural health and condition. However, vibration-based damage detection for complex structures such as long-span cable-supported bridges still remains a challenge. As a suspension or cable-stayed bridge involves in general thousands of structural components, the conventional damage detection methods based on model updating and/or parameter identification might result in ill-conditioning and non-uniqueness in the solution of inverse problems. Alternatively, methods that utilize, to the utmost extent, information from forward problems and avoid direct solution to inverse problems would be more suitable for vibration-based damage detection of long-span cable-supported bridges. The auto-associative neural network (ANN) technique and the probabilistic neural network (PNN) technique, that both eschew inverse problems, have been proposed for identifying and locating damage in suspension and cable-stayed bridges. Without the help of a structural model, ANNs with appropriate configuration can be trained using only the measured modal frequencies from healthy structure under varying environmental conditions, and a new set of modal frequency data acquired from an unknown state of the structure is then fed into the trained ANNs for damage presence identification. With the help of a structural model, PNNs can be configured using the relative changes of modal frequencies before and after damage by assuming damage at different locations, and then the measured modal frequencies from the structure can be presented to locate the damage. However, such formulated ANNs and PNNs may still be incompetent to identify damage occurring at the deck members of a cable-supported bridge because of very low modal sensitivity to the damage. The present study endeavors to enhance the damage identification capability of ANNs and PNNs when being applied for identification of damage incurred at deck members. Effort is first made to construct combined modal parameters which are synthesized from measured modal frequencies and modal shape components to train ANNs for damage alarming. With the purpose of improving identification accuracy, effort is then made to configure PNNs for damage localization by adapting the smoothing parameter in the Bayesian classifier to different values for different pattern classes. The performance of the ANNs with their input being modal frequencies and the combined modal parameters respectively and the PNNs with constant and adaptive smoothing parameters respectively is evaluated through simulation studies of identifying damage inflicted on different deck members of the double-deck suspension Tsing Ma Bridge.