• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.259-269
• /
• 2012

With the lower supply voltage and the higher operating frequency in integrated circuits, the analysis of the power distribution network (PDN) including on-chip inductances becomes more important. In this paper, an effective inductance extraction method for a regular on-chip power grid structure is proposed. The loop inductance model applicable to chip layout is proposed and the inductance extraction tool using the proposed inductance model based on post layout RC circuits is developed. The accuracy of the proposed loop model and the developed tool is verified by comparing the test circuit simulation results with those from the partial element equivalent circuit (PEEC) model. The voltage fluctuation from the RLC circuits extracted by the developed tool was examined for the analysis of on-chip inductance effects. The significance of on-chip power grid inductance was investigated by the co-simulation of chip-package-PCB.

• Journal of architectural history
• /
• v.14 no.2 s.42
• /
• pp.41-55
• /
• 2005

Temple with Multi-Buddha's Pavilions is a temple consisting of more than 2 Buddha's Pavilions. Individual Buddha's Pavilions tend to form distinguished area, or to keep independent axis from other Buddha's Pavilions. This study is to understand the philosophy of layout of individual Buddha's Pavilions located in the Temple with Multi-Buddha's Pavilions. To investigate a relationship to layout of individual Buddha's Pavilions on the basis of Buddhism doctrine makes us to understand philosophies about temple layout which temple constructors had. Bulkooksa, a temple having several pavilions placed in parallel, integrates diverse philosophies such as Vairocana Buddha-Ksetra from Vairocana Buddha's Pavilion, Sakyamuni Buddha-Ksetra from both Sakyamuni Buddha's Pavilion and two stupa, and Amitayus Buddha-Ksetra (Sukhavati) from Amitayus Buddha-Ksetra Pavilion. Sakyamuni Buddha's Pavilion and Amitayus Buddha's Pavilion are placed east to west in parallel, and Vairocana Buddha's Pavilion is placed behind them. Beobjusa, a temple having several pavilions placed cross axis, combines three axes such as the first, main axis linking Kumkang Gate - Chunwang Gate - Palsang Pavilion - Amitayus Buddha's Pavilion - Sakyamuni Buddha's Pavilion, the second axis linking Palsang Pavilion -Maitreya Pavilion, and the third axis linking Amitayus Buddha's Pavilion - Avalokiteshvara Pavilion. Relationship among each Buddha's land is clearly expressed by means of this cross axis layout of Buddha's Pavilions, reflecting a philosophy of rebirth in Nirvana that Wonhyo and Eusang propagated. Buseoksa, a temple having several pavilions placed the before and the behind, combines three Buddha's lands such as Maitreya Buddha-Ksetra, Amitayus Buddha-Ksetra and Vairocana Buddha-Ksetra, by means of arrangement of Maitreya Pavilion, Anyang Pavilion and Amitayus Buddha's Pavilion at bended axis, and east facing Amitayus Buddha. By investigating the philosophy of Temple layout with Multi-Buddha's Pavilions in this study, Buddha's Land conception, for people, that ancient Korean temples have, is understood.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.5
• /
• pp.95-102
• /
• 2013

In metabolomics, metabolic pathway is represented by well-displayed graph. Metabolic pathways, especially, have a complex binding structure, which makes the graphical representation hard to visualize. There is a problem that edge crossings exponentially increase as the number of nodes grows. To apply automatic graph layout techniques to the genome-scale metabolic flow of metabolism domains, it is very important to reduce unnecessary edge crossing on a metabolic pathway layout. we proposed a metabolic pathway layout algorithm based on 2-layer layout. Our algorithm searches any meaningful component existing in a pathway, such as circular components, highly connected nodes, and the components are drawn in upper layer. Then the remaining subgraphs except meaningful components are drawn in lower layer by utilizing a new radial layout algorithm. It reduces ultimately reduced the number of edge crossings. This algorithm is the basis of flexible analysis for metabolic pathways.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.6
• /
• pp.71-79
• /
• 2013

Metabolic pathway, represented by well-displayed graph, have a complex binding structure, which makes the graphical representation hard to visualize. To apply automatic graph layout techniques to the genome-scale metabolic flow of metabolism domains, it is very important to reduce unnecessary edge crossing on a metabolic pathway layout. we proposed a metabolic pathway layout algorithm based on 3-layer layout. Our algorithm searches any meaningful component existing in a pathway, such as circular components, highly connected nodes, and the components are drawn in middle layer. Then the remaining subgraphs except meaningful components are drawn in upper and lower layer by utilizing a new radial layout algorithm. It reduces ultimately reduced the number of edge crossings. Our algorithm solve the problem that edge crossings exponentially increase as the number of nodes grows.

• Journal of the Korean Institute of Educational Facilities
• /
• v.16 no.5
• /
• pp.27-33
• /
• 2009

The existing universities enlarged the scope, filled up the facilities. And many new universities are founded by increase of university students, the change of curriculum and extension of installations for new curriculum. However, the planning for university campus hinders desirable activities in campus and also the origin function of university, because of the problems caused by an application of a uniform planning standard that lacks in logical analysis and such a short step as the occasion demands for the growth and the change of the university campus changing more rapidly than any other field in society. This dissertation is for space program beginning from architectural explanation and basic planning concluding a general structure-planning for land utility, circulation planning, and building layout planning in order to find the practical solution for the applicable campus plan. The contents of this dissertation is summarized below. First, I studied the characteristics of the university, the structure of the university facilities and the expansion the development process of the campus. Second, through the case study of domestic campus planning, I analyzed the characteristics and the problems about space programming, facility layout planning, circulation planning and exterior space planning. Third, in the basis of the above analyses, I set up the directions of comprehensive campus master plan.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.161-168
• /
• 2005

The absorbing material is mostly used to changing the acoustic energy to the heat energy in the passive control, and that consists of the porous media. That controls an air borne noise while the stiffened plates, damping material and additional mass control a structure borne noise. The additional mass can decrease the sound by mass effect and shift of natural frequency, and damping material can decrease the sound by damping effect. The passive acoustic control using these kinds of control materials has an advantage that is possible to control the acoustic in the wide frequency band and the whole space at a price as compared with the active control using the various electronic circuit and actuator. But the space efficiency decreased and the control ability isn't up to the active control. So it is necessary to maximize the control ability in the specific frequency to raise the capacity of passive control minimizing the diminution of space efficiency such an active control. Therefore, the characteristics of control materials and the optimum layout of control materials that attached to the boundary of structure-acoustic coupled cavity were studied using sequential optimization on this study.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.312-318
• /
• 2022

Robot-based layout automation has been recently promoted for the purpose of improving productivity and quality. Marking robots have various functional demands to secure marking precision and environmental adaptability. In particular, in order to automate marking work of building structure, correction of the marking line through position recognition of rebars placed is required. Because the rebars must maintain a constant cover thickness from the formwork surface, if the rebars are out of planned position, the rebar or marking line need to be corrected to secure the cover thickness. Thus, the marking robot for structural work needs to have the function for determining the position correction of the rebar or the marking line. In order to judge the correction of marking line, it is required to measure the distance between the planned marking line and the rebar placed. Therefore, this study proposes an algorithm that can measure the distance between the planned line and the rebar, and correct marking line for the automatic operation of the marking robot. The results of this study will be utilized as a core function for unmanned operation of the marking robot and contribute to securing precise marking by reflecting construction errors.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.6 s.107
• /
• pp.36-51
• /
• 2005

The purpose of this thesis is to analyse modem urbanization process and the morphological transformation of the urban tissues in Kunsan between the you 1899 and 2001, The method of this study is to investigate the transformation process of morphological elements such as plot structure, building layout, building facades, land use, exterior space structure and their use, with actual field surveys, the analysis of land registration maps in 1912, and various topological map. Morphological analysis on modern Kunsan is progressed by three steps-typo-morphological analysis of urban tissue in old-town area, interpretation of morphological process, and transformation process, of morphological structure in Japanese concession in view of plots system. As a result, it is found that there is cyclical relationship among the morphological transformation processes of morphological elements, plots, buildings, land-uses, and access space to buildings. From the view of town plan change, the period of restoration of war damage in 1950s and compressive growing period in 1960s have important meaning in the morphological process of old-town area. Particularly the first building plan and layout type together with plot form and structure is acted as the main factor to decide the subsequent plot transformation system, exterior space system and the particular streetscape in Kunsan.

• Korean Institute of Interior Design Journal
• /
• no.36
• /
• pp.93-101
• /
• 2003

The first object of this study is to clarify the newly demanded service to the visiter in the museum. And the second is to consider the spatial configuration on the layout of exhibition and the shape of exhibition room from the view points of behavior of appreciation and other methodology. The results of this study are as follows : The exhibition content and structure of Seoul Museum of History formed by a story-line according to the theme of an each zone fixed sequence in an each exhibition that we are achieved. But the layout of exhibition and the shape of exhibition consist on the other hand of the freedom selection. So the problem appeared In the difference of the exhibition content and the layout of exhibition to the behavior of appreciation. It can be said that the concept of exhibition space should be taken into account and the spatial configuration by the completed floor plan in order to satisfy the planning concepts.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.253-257
• /
• 2001

This study reveals the sheet metal working with multi-forming type ultra precision process. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena, die structure, machining condition for die making, die material, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multi-forming ultra precision progressive die as a bending and drawing working of multi-stage and performed through the try out for thin sheet metal. This part I of papers related to the analysis of production part and strip process layout design through the metal forming simulation by DEFORM and IDEAS.