• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.511-520
• /
• 2010

In general, spot welding is used at no welding rod or flux for the process, low welding point temperature compared to arc welding, short heating time, less damage to the parent material, and low deformation and residual stress, relatively. Also, because of the pressurization effect, better mechanical qualities of the welding parts are obtained. Therefore, in various fields of industry its rapid operation speed can make mass production possible such as motor industry. In FEM analysis for the spot welding process, it is effective to use simple modeling rather than complicated one because of its numerous number of spots and reduction of analysis time. Therefore, this study provides with not only simplification of modeling analysis by using beam component composition of structure without re-compositing the spot welding point mesh but also modeling analysis of which property of fracture strength is reflected. In addition complete spot welding model is examined at rectangular post shape (hat shape) by impact test, compared the results, and verified its validity. As a result, it is possible to optimize the welding position and to recognize the strength of structure and the proposed equal distance model shows the effect of welding point reduction and improvement of stiffness.

• Journal of Contemporary Eastern Asia
• /
• 제10권1호
• /
• pp.55-71
• /
• 2011

China has been experiencing high economic growth along with massive change in its industrial structure. How will the industrial structure change affect the Chinese economy? Similar changes were observed by Japan, when the Japanese banking system fell into a structural failure in terms of the inability to respond to the paradigm shift from "catching up" to "frontier economy." This paper is undertaken to highlight the lessons that China can learn from Japan's prolonged financial slump. We point out that big cities in China have already shifted to frontier economy and major provinces are on the same trend. We argue that in spite of economic reform reshaping the Chinese banking system, the financing pattern of state owned commercial banks (SOCB) is not in line with the industrial change. The Chinese banking system should be overhauled or transformed to respond to the increasing uncertainty along with the paradigm shift. Otherwise, China may fall into the same dilemma that Japan had faced in its industrial structure change.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권5호
• /
• pp.18-25
• /
• 2016

본 연구는 MIDAS-Gen을 사용하여 골조-전단벽 구조에서 상부 전단벽의 미배치에 대한 구조적인 효과를 검토하였다. 본 연구에서는 해석 변수로 상부 전단벽의 미배치 층수, 상하 기둥 단면 치수의 변화, 상하 전단벽 두께 치수의 변화를 설정하였다. 골조-전단벽 구조에서 상부 전단벽의 미배치에 대한 구조적인 효과를 검토하기 위하여 전단벽의 미배치에 따른 전단력/전도모멘트 분포, 전단벽의 변곡점, 수평강성에 대하여 비교분석하였다. 본 연구의 결과는 골조-전단벽 구조에서 상부 전단벽의 미배치가 수평강성과 같은 구조성능에 미치는 영향을 정량적으로 제시하였다. 더욱이 본 연구의 결과는 합리적인 골조-전단벽 구조를 위한 구조설계 자료를 제공하는데 도움이 된다고 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.161-164
• /
• 2009

This research is to show the mechanical properties of structural steels by welding at high temperature. Welding parts are divided with weld metal and HAZ(Heat Affected Zone). HAZ is formed by interval from welding heat source and heating and cooling rates. Then, the change of both microstructure and mechanical properties occurs. Discontinuity of mechanical and chemical property at HAZ is the cause of safety decrease of structure. At this point, in this research, tensile tests at high temperature with test pieces of base metal and weld metal of SS400 and SM490 are accomplished. From the results, the mechanical properties of both SS400 and SM490 are standardized without welding or non-welding.

• 한국시뮬레이션학회논문지
• /
• 제7권2호
• /
• pp.115-123
• /
• 1998

A simulation is performed to investigate the effect of the pipe supports on the change of the natural frequencies of curved pipe systems containing fluid flow, for different elbow angles and geometry of the pipe systems. Based upon the Hamilton's principle, the equations of motions are derived, and the finite element equation is constructed to solve the corresponding eigenvalue problem. The angles of elbows do not affect the change of the fundamental natural frequency, but affect the change of the third or higher natural frequencies. Without any support, the change of the fundamental natural frequency due to the geometric change is smaller than the change of the second or higher natural frequencies. The more curve parts exist in the pipe system, the less change of lower frequency range, compared with the change of higher frequency range, is observed. Spring supports can be used to reduce the fundamental natural frequency, without change of the second or higher natural frequencies. To avoid resonance, which is critically dangerous from the view point of structural dynamics, the mechanical properties such as stiffness or the location of pipe supports are need to be changed to isolate the natural frequencies from the frequency range of dominant vibration modes.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.212-216
• /
• 2015

Oseltamivir, also known as Tamifu, is an inhibitor of neuraminidase protein which plays an essential role in proliferation and replication of influenza virus. Binding to the active site of neuraminidase, the oseltamivir prevents the protein from enzyme reaction. Conformational change of the protein(neuraminidase) should be accompanied by the enzyme reaction, but the drug inhibits the protein to deform. In this study, we examine the influence of oseltamivir on protein's conformational change in the structural and mechanical point of view. Finite element analysis of the protein can be an useful approach to investigate the influence of oseltamivir on the deformation of a protein. We suggest the finite element based protein model, and then perform the linear static analysis with the displacement loading condition based on the first two largest motion which can be obtained from the normal mode analysis. The results show that it takes more energy to change shape of the protein with an oseltamivir attached than the protein without an oseltamivir.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권5호
• /
• pp.121-129
• /
• 2006

본 연구는 균열이 발생한 R/C보를 탄소섬유시트(Carbon fiber sheet)로 보수했을 경우 시트의 박락과 균열의 확대 및 성장 메커니즘을 조사한 것이다. 실험변수는 하중형식, 재하속도, 사전균열 유무 등이다. 실험에서, 보의 파괴는 전단력 급변에 의한 재하점 직하부의 단차박리의 발전과 전파로 시작됨이 확인되었지만, 파괴기구는 하중형식, 재하속도, 사전균열 유무 등에 영향을 받지 않았다. 특히, 사전균열을 갖는 보의 경우, 균열의 성장은 재하점 직하의 특정한 균열에 집중되고, 이 균열의 확장에 의한 탈착이 보의 파괴를 이끌었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.87-94
• /
• 2006

In this study we carried out to analyze the effect of wind load on the structural stability of a container crane according to the change of the boom shape using wind tunnel test and provided a container crane designer with data which can be used in a wind resistance design of a container crane assuming that a wind load at 75m/s wind velocity is applied on a container crane. Data acquisition conditions for this experiment were established in accordance with the similarity. The scale of a container crane dimension, wind velocity and time were chosen as 1/200, 1/13.3 and 1/15. And this experiment was implemented in an Eiffel type atmospheric boundary-layer wind tunnel with $11.52m^2$ cross-section area. Each directional drag and overturning moment coefficients were investigated and uplift forces at each supporting point due to the wind load were analyzed.

• 지역연구
• /
• 제10권1호
• /
• pp.19-37
• /
• 1994

The past studies on the change of industrial location can be reinterpreted as spatial determinism, decision making process determinism and industrial sturcure determinism according to the view of the mutual operation between the economic activity and spatial structure. From the point of the industrial structure determinism which focuses on the fact that the locational type of production activity can be differenciated by the structural change of industry itself, it is proper to explain the change of industrial location not only by spatial condition but also by containing the fundamental changing causes for the reorganization of the spatial condition. One of the most important changing causes for reorganizing economic space is industrial technology. This study aims to explain the spatialization process of industrial technology and consists of the process of suggesting the hypothesis that the spatialization process is differentiated according to the production organization as the user of industrial technology and the user of industrial technology and the production system as using method. In other words, this study attempts to internalize the technology variable, which has been treated as external in the past studies on the industrial location, as an independent one and consider the production organization and production system as a paramenter, so that it can represent 'conceptual framework' for explaining the change of industrial location.

• 한국재료학회지
• /
• 제18권2호
• /
• pp.61-64
• /
• 2008

Electrical optical switching and structural transformation of $Ge_{15}Sb_{85}$, $Sb_{65}Se_{35}$ and N2.0 sccm doped $Sb_{83}Si_{17}$ were studied to investigate the phase change characteristics for PRAM application. Sb-based materials were deposited by a RF magnetron co-sputtering system and the phase change characteristics were analyzed using an X-ray diffractometer (XRD), a static tester and a four-point probe. Doping Ge, Se or Si atoms reinforced the amorphous stability of the Sb-based materials, which affected the switching characteristics. The crystallization temperature of the Sb-based materials increased as the concentration of the Ge, Se or Si increased. The minimum time of $Ge_{15}Sb_{85}$, $Sb_{65}Se_{35}$ and N2.0 sccm doped $Sb_{83}Si_{17}$ for crystallization was 120, 50 and 90 ns at 12 mW, respectively. $Sb_{65}Se_{35}$ was crystallized at $170^{\circ}C$. In addition, the difference in the sheet resistances between amorphous and crystalline states was higher than $10^4{\Omega}/{\gamma}$.