• Structural Engineering and Mechanics
• /
• 제56권3호
• /
• pp.385-407
• /
• 2015

This paper deals with the problem of the global stabilization for a class of tension leg platform (TLP) nonlinear control systems. It is well known that, in general, the global asymptotic stability of the TLP subsystems does not imply the global asymptotic stability of the composite closed-loop system. Finding system parameters for stabilizing the control system is also an issue need to be concerned. In this paper, we give additional sufficient conditions for the global stabilization of a TLP nonlinear system. In particular, we consider a class of NN based Takagi-Sugeno (TS) fuzzy TLP systems. Using the so-called parallel distributed compensation (PDC) controller, we prove that this class of systems can be globally asymptotically stable. The proper design of system parameters are found by a swarm intelligence algorithm called Evolved Bat Algorithm (EBA). An illustrative example is given to show the applicability of the main result.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.459-474
• /
• 2019

This study develops a novel recursive algorithm to significantly enhance the computation efficiency of a recently proposed stochastic subspace identification (SSI) methodology based on an alternative stabilization diagram. Exemplified by the measurements taken from the two investigated office buildings, it is first demonstrated that merely one sixth of computation time and one fifth of computer memory are required with the new recursive algorithm. Such a progress would enable the realization of on-line and almost real-time monitoring for these two steel framed structures. This recursive SSI algorithm is further applied to analyze 20 months of monitoring data and comprehensively assess the environmental effects. It is certified that the root-mean-square (RMS) response can be utilized as an excellent index to represent most of the environmental effects and its variation strongly correlates with that of the modal frequency. More detailed examination by comparing the monthly correlation coefficient discloses that larger variations in modal frequency induced by greater RMS responses would typically lead to a higher correlation.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2879-2888
• /
• 2023

In fusion environments, large scales of helium (He) atoms are produced by a radical transformation along with structural damage in structural materials, resulting in material swelling and degradation of physical properties. To understand its irradiation effects, this paper investigates the stability, electronic structure, energetics, charge density distribution, PDOS and TDOS, and diffusion processes of He impurities in 6HSiC materials. The formation energy indicates that a stable, favorable position for interstitial He is the HR site with the lowest energy of 2.40 eV. In terms of vacancy, the He atom initially prefers to substitute at pre-existing Si vacancy than C vacancy due to lower substitution energy. The minimum energy paths (MEPs) with migration energy barriers are also calculated for He impurity by interstitial and vacancy-mediated diffusion. Based on its calculated energy barriers, the most possible diffusion path includes the exchange of interstitial and vacancy sites with effective migration energies ranging from 0.101 eV to 1.0 eV. Our calculation provides a better understanding of the stabilization and diffusion behaviors of He impurities in 6H-SiC materials.

• BMB Reports
• /
• 제35권2호
• /
• pp.155-164
• /
• 2002

The structural aspects of ervatamin B have been studied in different types of alcohol. This alcohol did not affect the structure or activity of ervatamin B under neutral conditions. At a low pH (3.0), different kinds of alcohol have different effects. Interestingly, at a certain concentration of non-fluorinated, aliphatic, monohydric alcohol, a conformational switch from the predominantly $\alpha$-helical to $\beta$-sheeted state is observed with a complete loss of tertiary structure and proteolytic activity. This is contrary to the observation that alcohol induces mostly the $\alpha$helical structure in proteins. The O-state of ervatamin B in 50% methanol at pH 3.0 has enhanced the stability towards GuHCl denaturation and shows a biphasic transition. This suggests the presence of two structural parts with different stabilities that unfold in steps. The thermal unfolding of ervatamin B in the O-state is also biphasic, which confirms the presence of two domains in the enzyme structure that unfold sequentially. The differential stabilization of the structural parts may also be a reflection of the differential stabilization of local conformations in methanol. Thermal unfolding of ervatamin B in the absence of alcohol is cooperative, both at neutral and low pH, and can be fitted to a two state model. However, at pH 2.0 the calorimetric profiles show two peaks, which indicates the presence of two structural domains in the enzyme with different thermal stabilities that are denatured more or less independently. With an increase in pH to 3.0 and 4.0, the shape of the DSC profiles change, and the two peaks converge to a predominant single peak. However, the ratio of van't Hoff enthalpy to calorimetric enthalpy is approximated to 2.0, indicating non-cooperativity in thermal unfolding.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2624-2626
• /
• 2000

The stabilization controls of coupled tank system and ball-beam system are difficult control tasks because of their high order time delay, nonlinearity and structural unstability. Fuhermore, a series of classical methods such as a conventional PID and a full state feedback controller(FSFC) based on the local linearizations have narrow stabilizable regions. Therefore, in this paper, in order to stabilize two representative nonlinear system mentioned above, a Sliding Mode Controller based on a Real Variable Elitist Genetic Algorithm(RVEGA SMC) was proposed.

• Composites Research
• /
• 제34권1호
• /
• pp.23-29
• /
• 2021

탄소섬유는 단위 중량 당 높은 강도 및 모듈러스를 갖기 때문에 고성능 복합 재료 제조 시 탄소보강재로 많이 사용된다. 그러나 탄소 섬유를 제조하는 공정에서 많은 시간과 높은 에너지를 소모하여 제조비용이 크게 증가하기 때문에 상용화에 어려움을 겪고 있다. 따라서 생산 비용 절감을 위하여 제조 공정에 사용되는 에너지를 대체할 수 있는 고속의 저 에너지원을 적극적으로 찾아 연구할 필요가 높아졌다. 폴리아크릴로니트릴(PAN) 전구체(Precursor)로 상용화 된 탄소 섬유는 180~300℃의 대기 분위기에서 안정화 과정이 이루어지고, 1600℃ 이하의 불활성 가스 분위기에서 탄화하여 탄소 섬유를 생산할 수 있다. 이 두 공정은 많은 시간과 높은 에너지를 사용하지만, 고성능 탄소 섬유를 생산하는 데 필수적이며 중요하다. 따라서 최근에는 공정 시간을 단축하고 에너지 소비를 줄일 수 있는 플라즈마, 전자 빔 및 마이크로파와 같은 다양한 다른 에너지원을 보조적으로 사용 함으로써 저 에너지·고속 안정화 공정 기술이 시도되고 있다. 본 연구에서는 플라즈마 공정과 열처리를 연속적으로 수행하여 PAN 전구체 안정화 공정을 연구하였으며, 모폴로지, 구조적 변화, 열적 및 물리적 특성 변화를 연구하였다.

• 경영과학
• /
• 제18권1호
• /
• pp.119-133
• /
• 2001

It is important to find the equilibrium level of real interest rate for it affects real and financial sector of economy. However, it is difficult to find the equilibrium level because like the most macroeconomic model the real interest model has parameter instability problem caused by structural change and it is supported by various theories and definitions. Hence, in order to cover these problems structural change detection model of real interest rate is developed to combine the real interest rate equilibrium model and the procedure to detect structural change points. 3 equations are established to find various effects of other interest-related macroeconomic variables and from each equation, structural changes are found. Those structural change points are consistent with common expectation. Oil Crisis (December, 1987), the starting point of Economic Stabilization Policy (January, 1982), the starting point of capital liberalization (January, 1988), the starting and finishing points of Interest deregulation (January, 1992 and December, 1994), Foreign Exchange Crisis (December, 1977) are detected as important points. From the equation of fisher and real effects, real interest rate level is estimated as 4.09% (October, 1988) and dependent on the underlying model, it is estimated as 0%∼13.56% (October, 1988), so it varies so much. It is expected that this result is connected to the large scale simultaneous equations to detect the parameter instability in real time, so induces the flexible economic policies.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.86-92
• /
• 2021

As interest and demand for high value-added industries, including the global automobile and aerospace industries, have increased recently, demand for line centers with excellent performance that can respond to the production system for producing high value-added products is also rapidly increasing. A line center improves productivity based on the installed area using a multi-spindle compared to a conventional machining center. However, as the number of spindles increases, the weight increases and results in structural problems owing to the heat and vibration generated by each spindle. Therefore, it is necessary to improve machining precision through the structural improvement of the line center. This study presents research on the stabilization design of the line center through structural stability analysis through structural analysis to develop a compact multi-axis line center. An optimization model of the line center has been proposed to improve the processing precision and increase the rigidity by performing weight reduction based on the structural analysis results.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
• /
• pp.163-173
• /
• 1997

This article presents an application of a large-scale structural mixing model (Broadwell et al. 1984) to the blowout of turbulent reacting jets discharging perpendicularly into an unconfined cross air-flow. In an analysis of a common stability curve, a plausible explanation can be made that the phenomenon of blowout is related only to the mixing time scale of the two flows. The most notable observation is that the blowout distance is traced at fixed positions at all times according to the velocity ratio R. Measurements of the lower blowout limits in the liftable flame agree qualitatively with the blowout parameter ${\varepsilon}$, proposed by Broadwell et al. Good agreement between the results calculated by a modified blowout parameter ${\varepsilon}^'$ and experimental results confirms the important effect of a large-scale structure in specifying the stabilization feature of blowouts.

• Structural Engineering and Mechanics
• /
• 제75권3호
• /
• pp.311-325
• /
• 2020

In applying the spectral stochastic finite element methods to the frequency response analysis, the conventional methods are known to give unstable and inaccurate results near the natural frequencies. To address this issue, a new sensitivity based stabilized formulation for stochastic frequency response analysis is proposed in this paper. The main difference over the conventional spectral methods is that the polynomials of random variables are applied to both numerator and denominator in approximating the harmonic response solution. In order to reflect the resonance behavior of the structure, the denominator polynomials is constructed by utilizing the natural frequency sensitivity and the random mode superposition. The numerator is approximated by applying a polynomial chaos expansion, and its coefficients are obtained through the Galerkin or the spectral projection method. Through various numerical studies, it is seen that the proposed method improves accuracy, especially in the vicinities of structural natural frequencies compared to conventional spectral methods.