• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3331-3335
• /
• 2014

We examine the potential use of disordered mesoporous carbon as a functional additive for confining dissolved Li-polysulfides and improving the cycling performance of Li-S batteries. To promote a better understanding of the correlation between the total pore volume of disordered mesoporous carbon and the cycling performance of Li-S batteries, a series of disordered mesoporous carbons with different total pore volumes are successfully synthesized using a commercial silica template. Based on the electrochemical and structural analyses, we suggest that the total pore volume of disordered mesoporous carbon is a predominant factor in determining its capability for either the absorption or adsorption of Li-polysulfides, which is primarily responsible for enhancing the cycling performance. The addition of disordered mesoporous carbon is also effective in enhancing the homogeneous distribution of active sulfur in the cathode, thereby affecting the cycling performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.7
• /
• pp.1049-1053
• /
• 1999

Chopped wheat straw (0.5-1.5 cm) was subjected to different treatment combinations in a $5{\times}4$ factorial arrangement involving the five levels of urea (0, 2, 3, 4 and 5%, w/w) and four levels of lime (0, 2, 4 and 6%, w/w) at 50% moisture and kept for 3 wk reaction period at about $35{^{\circ}C}$ in laboratory. Treated wheat straw samples were analyzed to study the associative effect of urea and lime on chemical composition, in sacco and in vitro digestibilities. Results showed that cell wall constituents (CWC) solubilized significantly (p<0.01) due to urea and lime treatment on one hand and substantially increase the crude protein (CP) on the other in wheat straw. The main effect on synergism of both chemicals was noticed on organic matter (OM), neutral detergent fibre (NDF), hemicellulose (HC), acid detergent lignin (ADL) and silica by solubilising their contents as a result of considerable increase in cell contents in treated wheat straw. The respective decreases were 5.45, 13.0, 37.23, 44.95 and 26.16% in different treatment combinations. The most interesting feature of the treatment was evident by increase in ash content on each level of lime application. CP content increase up to 12.78% due to urea treatment in comparison with untreated wheat straw (2.56%). The effect of solubilization of structural carbohydrates and increased crude protein due to synergistic effect of urea and lime were clearly seen on improved digestibility of OM and DM. The increase in ISOMD, ISDMD, and IVDMD were 21.67, 21.67, 16.24, and 17.5 units. The increase in digestibility were relative to additions of both chemicals and digestibility values increased with increasing levels of urea plus lime concentration in different treatment combination. The maximum improvement was noticed at 4% urea and 4% lime levels at 50% moisture for 3 wk reaction period in treated wheat straw.

• Journal of the Mineralogical Society of Korea
• /
• v.5 no.1
• /
• pp.6-13
• /
• 1992

Thermodynamic data of mineral reactions were used to construct a phase diagram for the formation of illite from andalusite at one bar and 325${\circ}C$ in the hydrothermal alteration. Based on chemical compositions, the free energy of formation of illite coexisting with andalusite was calculated by assuming the ideal mixing ina bunary system consisting of muscovite and pyrophyllite components. For illite with structural formula $K_{0.86}Al_{2.93}Si_{3.03}O_{10}(OH)_2$, its free energy of formation is -1147.727 kcal/mole at the condition under consideration. The stability area of illite is more narrow than that of end-member muscovite and prefers lower activity of silica. Illite was formed by hydration of andalusite while pyrophyllite decomposed. Illitization took place preferentially at margin and/or along fractures of andalusite.

• The Korean Journal of Mycology
• /
• v.14 no.1
• /
• pp.61-70
• /
• 1986

Sterigmatocystin bears a close structural relationship to aflatoxin $B_1$ and is a carcinogenic compound that has been shown to affect various species of experimental animals. Reaction and toxicity of sterigmatocystin in the artificial gastric juice were investigated. Sterigmatocystin was degraded in artificial gastric juice and extracted by the method of A.O.A.C. After cleaned up by silica gel column chromatography, this substance was detected and characterized by thin layer chromatography, UV, IR and mass spectra. It showed $R{\mathcal{f}}$ 0.4 and brick-red color by TLC. Especially, in the mass spectrum of it, fragment peak at m/e 327 was due to the loss of the $-CH_3$ and $-H_2O$, fragment peak at m/e 341 was due to the loss of the $H_2O$ and $-H^+$, and fragment peak at m/e 239 was due to the loss of the 2-chloro-tetrahydrofuran and methyl group from the parent molecule. Therefore, a degraded substance of sterigmatocystin reacted in artificial gastric juice (Sub. K) was estimated with additional formation of hydrochloric acid. In four-day-old chicken embryos, the mean lethal dose $(LD_{50})$ was $140\;{\mu}g/egg$, and 90 to 100% of the embryos were killed with 1 mg/egg. This $LD_{50}$ $140\;{\mu}g/egg$ compared with an $LD_{50}$ $14.69\;{\mu}g/egg$ for sterigmatocystin (acute toxicity) showed the substance to be much less toxic than sterigmatocystin.

• Journal of Life Science
• /
• v.17 no.7 s.87
• /
• pp.915-922
• /
• 2007

In order to discover physiologically active substance, we investigated a powder obtained by processing of Opuntia ficus-indica var. saboten Makino trunk. The powder was treated by sulfuric acid and then extracted by several solvents such as methanol, methylene chloride, ethanol etc. Among them, the best antimicrobial activity was showed by methylene chloride extract. To identify materials exhibiting physiological activation, the acid hydrolyzed extract was separated by 7 fractions through preparative silica gel TLC. The effective fraction exhibiting the best broad antimicrobial activity was identified, named as MBT-01108. From structural analysis of the products extracted to acid hydrolysis, a compound exhibiting the antimicrobial activities is identified to levulinic acid. Levulinic acid isolated from Opuntia ficus-indica var. saboten Makino may be applicable as a natural preservative of food or cosmetic and for prevention of bacterial diseases, an ingredient of acne, ageing and whitening cosmetics and an antimicrobial agent.

• Korean Journal of Materials Research
• /
• v.19 no.4
• /
• pp.228-231
• /
• 2009

Phase transition in ferroelectric polymer is very interesting behavior and has been widely studied for real device applications, such as actuators and sensors. Through the phase transition, there is structural change resulting in the change of electrical and optical properties. In this study, we fabricated the Febry-Perot interferometer with the thin film of ferroelectric P(VDF-TrFE) 50/50 mol% copolymer, and thermo-optical properties were investigated. The effective thermo-optical coefficient of P(VDF-TrFE) was obtained as $2.3{\sim}3.8{\times}10^{-4}/K$ in the ferroelectric temperature region ($45^{\circ}C{\sim}65^{\circ}C$) and $6.0{\times}10^{-4}/K$ in the phase transition temperature region ($65^{\circ}C{\sim}85^{\circ}C$), which is a larger than optical silica-fiber and PMMA. The resonance transmission peak of P(VDF-TrFE) with the variation of temperature showed hysteretic variation and the phase transition temperature of the polymer in heating condition was higher than in the cooling condition. The elimination of the hysteretic phase transition of P(VDF-TrFE) is necessary for practical applications of optical devices.

• Smart Structures and Systems
• /
• v.24 no.4
• /
• pp.541-552
• /
• 2019

Construction development and greenhouse gas emissions have globally required a strategic management to take some steps to stain and maintain the environment. Nowadays, recycled aggregates, in particular ceramic waste, have been widely used in concrete structures due to the economic and environmentally friendly solution, requiring the knowledge of recycled concrete. Also, one of the materials used as a substitute for concrete cement is wollastonite mineral to decrease carbon dioxide (CO2) from the cement production process by reducing the concrete consumption in concrete. The purpose of this study is to investigate the effect of wollastonite on the mechanical properties and durability of conventional composite concrete, containing recycled aggregates such as compressive strength, tensile strength (Brazilian test), and durability to acidic environment. On the other hand, in order to determine the strength and durability of the concrete, 5 mixing designs including different wollastonite values and recovered aggregates including constant values have been compared to the water - cement ratio (w/c) constant in all designs. The experimental results have shown that design 5 (containing 40% wollastonite) shows only 6.1% decrease in compressive strength and 4.9% decrease in tensile strength compared to the control plane. Consequently, the use of wollastonite powder to the manufacturing of conventional structural concrete containing recycled ceramic aggregates, in addition to improving some of the properties of concrete are environmentally friendly solutions, providing natural recycling of materials.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.6
• /
• pp.533-541
• /
• 2018

Chloride attack, one of the major deterioration phenomena in RC(Reinforced Concrete) structure, causes corrosion of reinforcement, and this leads degradation of serviceability and structural problems. The application of silicate based impregnant to concrete surface are known for excellent constructability and cost-benefit for the maintenance of RC structure. In the work, the compressive strength and resistance of chloride diffusion for concrete were evaluated after improving property of concrete surface through two types of silicate based impregnant. Furthermore, based on the previous research and the result from the work, service life analysis was performed. After impregnating of silicate, strength and resistance of chloride diffusion were remarkably improved, and the service life increase to 159% for silicate A impregnation and 304% for silicate B impregnation, respectively.

• Computers and Concrete
• /
• v.29 no.6
• /
• pp.375-391
• /
• 2022

This paper examined the impact of the cross-sectional structure on the structural results under different loading conditions of reinforced concrete (RC) members' management limited in Carbon Fiber Reinforced Polymers (CFRP). The mechanical properties of CFRC was investigated, then, totally 32 samples were examined. Test parameters included the cross-sectional shape as square, rectangular and circular with two various aspect rates and loading statues. The loading involved concentrated loading, eccentric loading with a ratio of 0.46 to 0.6 and pure bending. The results of the test revealed that the CFRP increased ductility and load during concentrated processing. A cross sectional shape from 23 to 44 percent was increased in load capacity and from 250 to 350 percent increase in axial deformation in rectangular and circular sections respectively, affecting greatly the accomplishment of load capacity and ductility of the concentrated members. Two Artificial Intelligence Models as Extreme Learning Machine (ELM) and Particle Swarm Optimization (PSO) were used to estimating the tensile and flexural strength of specimen. On the basis of the performance from RMSE and RSQR, C-Shape CFRC was greater tensile and flexural strength than any other FRP composite design. Because of the mechanical anchorage into the matrix, C-shaped CFRCC was noted to have greater fiber-matrix interfacial adhesive strength. However, with the increase of the aspect ratio and fiber volume fraction, the compressive strength of CFRCC was reduced. This possibly was due to the fact that during the blending of each fiber, the volume of air input was increased. In addition, by adding silica fumed to composites, the tensile and flexural strength of CFRCC is greatly improved.

• Structural Engineering and Mechanics
• /
• v.85 no.1
• /
• pp.29-53
• /
• 2023

High-strength shielding concrete against gamma radiation is a priority for many medical and industrial facilities. This paper aimed to investigate the gamma-ray shielding properties of high-strength hematite concrete mixed with silica fume (SF) with nanoparticles of lead dioxide (PbO₂), tungsten oxide (WO₃), and bismuth oxide (Bi₂O₃). The effect of mixing steel fibres with the aforementioned binders was also investigated. The reference mixture was prepared for high-strength concrete (HSCC) containing 100% hematite coarse and fine aggregate. Thirteen mixtures containing 5% SF and nanoparticles of PbO₂, WO₃, and Bi₂O₃ (2%, 5%, and 7% of the cement mass, respectively) were prepared. Steel fibres were added at a volume ratio of 0.28% of the volume of concrete with 5% of nanoparticles. The slump test was conducted to workability of fresh concrete Unit weight water permeability, compressive strength, splitting tensile strength, flexural strength, and modulus of elasticity tests were conducted to assess concrete's engineering properties at 28 days. Gamma-ray radiation of 137Cs emits photons with an energy of 662 keV, and that of 60Co emits two photons with energies of 1173 and 1332 keV were applied on concrete specimens to assess radiation shielding properties. Nanoparticles partially replacing cement reduced slump in workability of fresh concrete. The compressive strength of mixtures, including nanoparticles was shown to be greater, achieving 94.5 MPa for the mixture consisting of 7.5 PbO2. In contrast, the mixture (5PbO₂-F) containing steel fibres achieved the highest values for splitting tensile, flexural strength, and modulus of elasticity (11.71, 15.97, and 42,840 MPa, respectively). High-strength shielded concrete (7.5PbO2) showed the best radiation protection. It also showed the minimum concrete thickness required to prevent the transmission of radiation.