• Earthquakes and Structures
• /
• v.9 no.3
• /
• pp.657-671
• /
• 2015

The level of ductility is determined by depending on the intended use of the building, the region's seismic characteristics and the type of structural system when buildings are planned by engineers. Major portion of seismic energy is intended to be consumed in the plastic zone in structural systems of high ductility, so the occurrence of damages in load bearing and non-load bearing structural elements is accepted in planning stage under severe earthquakes. However, these damages must be limited among specific values in order not to endanger buildings in terms of the bearing capacity. Isolators placed between the basement and upper structure make buildings behave elastically by reducing the effects of seismic loads and improving seismic performance of building significantly. Thus, damages can be limited among desired values. In this study, the effectiveness of seismic isolation is investigated on both fixed based and seismic isolated models of a hospital building with high ductility level with regard to lateral displacements, internal forces, structural periods and cost of the building. Layered rubber bearings are interposed between the base of the structure and foundation. Earthquake analysis of the building are performed using earthquake records in time domain (Kocaeli, Loma Prieta and Landers). Results obtained from three-dimensional finite element models are presented by graphs and tables in detail. That seismic isolation reduces significantly the destructive effects of earthquakes on structures is seen from the results obtained by seismic analysis.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.3
• /
• pp.15-24
• /
• 2022

In this research, the case of modern wooden structures since 1950 with span of 30m or more was investigated and analyzed the construction status and structural planning characteristics of wooden large space architecture. As a result, wooden large space buildings have built around Asia, North America, and Europe, in which cases of ice skating stadiums with span of 30m to 60m were concentrated. In the case of baseball parks and football stadiums, even a span of about 165m was built in a wooden structure. In addition, it was found that the structural systems used in wooden large space structures were a funicular arch and truss structure, in that cases, funicular arch system consisting of radial arrangements was used in the examples exceeded 150m and the two way truss system was also used in long span wooden structures exceeding 100m. As the truss structure with a tie-rod or the flexure+tension structure was partially investigated, it can be seen that various timber structural systems need to be devised and researched. Also, It was investigated that a technique in which some members of the truss are made of steel or a composite member of steel and timber is also possible to develop

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.363-375
• /
• 2013

Today, a shortage of the skilled operator has been intensified gradually and the necessity of an earthwork in extreme environment operators are difficult to access is increasing for the purpose of resource development and new living space creation. For this reason, an effort to develop an unmanned excavation robot for fully automated earthwork system is continuing globally. In Korea, a research consortium called 'Intelligent Excavation System' has been formed since 2006 as a part of Construction Technology Innovation Program of Ministry of Land, Transport and Maritime Affairs of Korea. Among detailed technologies of the Task Planning System is one of the core technologies of IES, this paper explains research and development process of the Local Area Design Module, which provides informatization unit to create automated excavators' work command information at operation level such as location, range, target, and sequence for excavation work. Designing of Local Area should be considered various influential factors such as excavator's specification, working mechanism, heuristics, and structural stability to create work plan guaranteed safety and effectiveness. For this research, conceptual and detail design of the Local Area is performed for analyzing design element and variable, and quantization method of design specification corresponding with heuristics and structural safety is generated. Finally, module is developed through constructed algorithm and developed module is verified.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.5
• /
• pp.38-59
• /
• 2008

This research has a meaning to provide basic data for eco-friendly way of district unit plans and ecological landscape planning by evaluation of biotope preservation value at the level of district unit and designating land development of the site, the whole area of Sinseo-dong (Dong-gu, Daegu metropolitan city) for research site. The summary of analysis result is as follows. As a result of classification of biotope types on the research site, it is divided into 11 biotope groups such as a residential biotope group and 51 specific biotope types which is subordinate to the groups. As a result of the first value assessment on classified biotope types, there are 16 types of natural rivers which is full of vegetation as a I class. Also it is analysed as 9 types of IIclass, 14 of IIIclass, 8 of IVclass, and 4 of Vclass. In particular, in light of a wildlife habitat, EB, in case of broad-leaved tree of mixed forest assessed as a II class, was classified into Iclass which is one-step upgraded as a final class with the analysis as there is a structural characteristic (more than 71% of low density, 50 years of age-class). As a result of second assessment, it is analysed that there are 17 special sites (1a,1b) and 33 special sites (2a, 2b, 2c) respectively for preservation of species and biotope. Particularly, in case of the No. 27 space, it was assessed that it has the value of about medium (IIIclass) level, but its value was upgraded with the on-spot detailed investigation that most of Aristolochia contorta, designated as a rare plant by Ministry of Environment, is growing. It is regarded that the above-mentioned research result on evaluation of biotope preservation value is expected to provide very important basic materials for future district unit plans and smooth integration with landscape ecology plans and eco-friendly space development.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.543-553
• /
• 2008

Shipbuilding is a kind of ETO(Engineering To Order) industry which designs and produces a product in accordance to various requirement of customers, rules and regulations. Recently, the number of ordered ships has been increased by up to two or three times in each domestic shipyards. Most shipyards have been adopted 3D ship CAD, ERP(Enterprise Resource Planning) and APS(Advanced Planning System) to get an efficient product development and manufacturing system. However, not only the effective operation of 3D ship CAD, ERP and APS but also the production efficiency can be achieved only if product information management which can manages the product data is implemented in an integrated environment. Present study has suggested a systematic approach to implement a PLM system to manage the product data in early design shipbuilding. Also, a prototype of PLM is implemented to manage the product data in a basic ship-design. In the prototype system, a product structure and architecture of PLM is considered.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.2
• /
• pp.77-81
• /
• 2011

Aluminum nitride (AlN) thin films were prepared by using nitrogen ion beam assisted reactive radio frequency (RF) magnetron sputtering on the glass substrates without intentional substrate heating. After deposition, the effect of nitrogen ion beam energy on the structural and optical properties of AlN films were investigated by x-ray diffraction (XRD), atomic force microscope (AFM) and UV-Vis. spectrophotometer, respectively. AlN films deposited with $N^+$ ion irradiation at 100 eV show the higher (002) peak intensity in XRD pattern than other films. It means that $N^+$ ion energy of 100 eV is the favorable condition for low temperature crystallization. AFM images also show that surface average roughness is increased from 1.5 to 9.6 nm with $N^+$ ion energy in this study. In an optical observation, AlN films which deposited by $N^+$ ion beam energy of 100 eV show the higher transmittance than that of the films prepared with the other $N^+$ ion beam conditions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.4
• /
• pp.50-60
• /
• 1996

The purpose of this study is to investigate the prime factors that affect user satisfaction of area and facilities in urban forests, to classify those factors, to find out factorial structure of user satisfaction about them, and then to suggest important indicators in the urban forest planning, design, and development. The survey research was done using the self-administered questionnaire method by the people in the city of the Pusan who participated in recreational activities in the Mt. Keumjung. Factor analysis was used to extract the prime factors related to the recreational satisfaction concerning the area and facilities of the urban forest by the SPSS program, and then prime factors were used to investigate the factorial structure of user recreational satisfaction in the urban forest by the LInear Structure RELation program. According to the factor analysis concerning the 13 variables, 4 prime factors by the statistical values were considered as effective, indicating, 'health and recreational facilities', 'convenience and management facilities','facilities for the physical and psychological training' and 'historical and cultural areas'. The results of the causal structure analysis were identified as having significant effects mutually on endogenous variables, 'overall recreational satisfaction of the areas and facilities in the Mt. Keumjung','health and recreational facilities','convenience and management facilities','facilities for the psychological training', and 'historical and cultural areas'. But exogenous variables which have significant effects on endogenous variables were also indentified. Overall fits of both causal model were very good. The hypothetical causal structural equation models based on the results found partially significant correlation between dndogenous variables and between envogenous and exogenous variables. These significant relationships indiate important factors and variables that should be considered in planning, design, and development of the urban forests. Therefore, development direction of the Mt. Keumjung has to be analyzed as significant factors concerning user recreational satisfaction in a systematic was, recognized as important variables for planning process. The plan for development and management also should reflect the natural conservation policy from the environmental conservation movement like natural conservation advertisement and environmental education.

• Journal of KIISE
• /
• v.43 no.3
• /
• pp.353-361
• /
• 2016

During image-guided radiation treatment of lung cancer patients, it is necessary to track the tumor motion because it can change during treatment as a consequence of respiratory motion and cardiac motion. In this paper, we propose a method for tracking the motion of the lung tumors based on the three-dimensional image information from planning 4D MDCT and treatment 4D CBCT images. First, to effectively track the tumor motion during treatment, the global motion of the tumor is estimated based on a tumor-specific motion model obtained from planning 4D MDCT images. Second, to increase the accuracy of the tumor motion tracking, the local motion of the tumor is estimated based on the structural information of the tumor from 4D CBCT images. To evaluate the performance of the proposed method, we estimated the tracking results of proposed method using digital phantom. The results show that the tumor localization error of local motion estimation is reduced by 45% as compared with that of global motion estimation.

• Structural Engineering and Mechanics
• /
• v.39 no.3
• /
• pp.427-447
• /
• 2011

The progressive collapse phenomenon is generally regarded as dynamic. Due to the impracticality of nonlinear dynamic computations for practitioners, an interest arises for the development of equivalent static pushover procedures. The present paper proposes a methodology to identify such a procedure for sudden column removals, using energetic evaluations to determine the pushover loads to apply. In a dynamic context, equality between the cumulated external and internal works indicates a vanishing kinetic energy. If such a state is reached, the structure is sometimes assumed able to withstand the column removal. Approximations of these works can be estimated using a static computation, leading to an estimate of the displacements at the zero kinetic energy configuration. In comparison with other available procedures based on such criteria, the present contribution identifies loading patterns to associate with the zero-kinetic energy criterion to avoid a single-degree-of-freedom idealisation. A parametric study over a family of regular steel structures of varying sizes uses non-linear dynamic computations to assess the proposed pushover loading pattern for the cases of central and lateral ground floor column failure. The identified quasi-static loading schemes are shown to allow detecting nearly all dynamically detected plastic hinges, so that the various beams are provided with sufficient resistance during the design process. A proper accuracy is obtained for the plastic rotations of the most plastified hinges almost independently of the design parameters (loads, geometry, robustness), indicating that the methodology could be extended to provide estimates of the required ductility for the beams, columns, and beam-column connections.

• Journal of architectural history
• /
• v.7 no.4 s.17
• /
• pp.61-75
• /
• 1998

The Unite d'Habitation at Marseilles was an experimental project that Le Corbusier had been waiting for since 1920s in order to explore his ideals and visions in mass housing and city planning. As a leader of the first generation members in CIAM, Le Corbusier tried to give a new form and an order to the Unite d'Habitation at Marseilles in both building design and city planning level. The purpose of this research is to investigate the design characteristics of the Unite d'Habitation at Marseilles in three different levels of built environment with a particular emphasis on the process through which an original form is derived from its contextual settings. In the level of city planning, Le Corbusier aimed to reshape traditional low-rise urban housing by deploying several Unites spaciously. Le Corbusier believed that the spacious deployment of Unites would bring us both the functional economy in the city and the natural amenity in the suburbs. As Unite d'Habitation would be called frequently as vertical garden city, the influence of suburban garden city on Unite d'Habitation is apparent. In the building level, the binomial harmony of individual-collectivity was pursued by providing three different public floors and by combining 23 different family unit types in the Unite d'Habitation at Marseilles. In order to visualize the concept of object-type, family units were prefabricated and inserted into the structural frame of the Unite d'Habitation at Marseilles. Two family units are combined to make a three-story section with street corridor in the middle. This three-story section unit is very original as it has access corridor every third floor and each unit could have considerable depth with the help of the living space of two story height. In consideration of formal and plan similarity as well as contextual edivdence, it is concluded that the three-story section of the Unite d'Habitation is derived more from Narkomfin Apartments than from the monastery at Ema or Immuble Villas.