• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.638-641
• /
• 2004

This study suggests the optimum deconstruction management system for minimizing construction waste and increasing reuse and recycle rate of material to be different from traditional demolition. The purpose of this system is to minimize environmental damages and reduce construction waste quantity of a country by planning and operating preliminarily estimation of demolition quantity, demolition methods of each structural elements and reuse or recycle methods of C&D waste. This system is consist of four modules such as planning of preliminary demolition survey, estimating of demolition quantity, planning of demolition schedule and planning of construction waste management, and these all modules can be used individually module according to user's utilization purpose.

• KIEAE Journal
• /
• v.3 no.3
• /
• pp.67-74
• /
• 2003

The repair and maintenance planning is the principal transaction to prevent from the degradation of apartment buildings to prolong their lives. Various building components as part of living area should be maintained properly and timely before critical defects are realized, then the building life might be extended until the limit of its usability. In other words, various building components such as utilities, finishes and structural members are needed to be repaired and replaced in different time interval after completion. To do this systematically, a maintenance management system for Long-Range Planning (LRP) needs developing. The LRP should be figured out based on the forecast of repairing and replacing cycle of building components according to work trades. And the precise forecast of repairing and replacing time of the components helps to enhance the usability of the developed system. The purpose of this paper is to suggest a system with which apartment building managers carry out the tasks of periodical check, diagnosis and replacement of building components based on the maintenance calendar. By using the system, they can easily forecast repairing and replacing time of the components with the consideration of life cycle of building materials and build the LRP.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.157-162
• /
• 2005

It is necessary for us to research and analyze of Open Housing in order to change new housing system, because exiting multi family housing is lack of flexibility and easy remodeling. The purpose of this study is to supply and grasp basic planning and design data for flexibility of Open Housings in Korea. This study is based on the literature survey and actual investigation through visiting 17 open housing sites from 1995 to 2005 in Netherlands, Finland and Japan, which are main Open Housing. We analyzed the planning methods and elements for flexibility of open housing block and unit plan, and described the contents of analyses. We found a lot of planning and design methods-supplying option plan and user participation before occupation, various structural system for openness, common piping shaft location, slab-down and applying access flooring system, movable and demountable partition wall system etc. -applied to the open housings, and findings are applicable to the planning and designing works of apartment housings in Korea.

• Journal of Korea Planning Association
• /
• v.53 no.7
• /
• pp.5-22
• /
• 2018

While the competitiveness of small and medium sized cities has become important for balanced development at the national scale, they have experienced continuous decline in population and employment, particularly those in non-capital regions. In addition, some of small and medium sized cities have been classified into shrinking cities that have declined due to their long-term structural reasons. To address these issues, a regional approach, by which a hub city and its surrounding small and medium sized cities can collaborate has been suggested. Given this background, the purpose of this study is to identify and delineate hub cities and their impact areas by using travel data as a functional network index. This study uses a centrality index to identify the hub cities of small and medium sized cities and Markov-chain model and cluster analysis to delineate regional boundaries. The mean first passage time (MFPT) generated from the Markov-chain model can be interpreted as functional distance of each region. The study suggests a methodological approach delineating the boundaries of regions incorporating functional relationships of hub cities and their impact areas, and provides 59 hub cities and their impact areas. The results also provide policy implications for regional spatial planning that addresses appropriate planning boundaries of regions for enhancing the economic competitiveness of small and medium sized cities and ensuring services for shrinking cities.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.1157-1168
• /
• 2021

Hotels drive the growth and development of tourism. Despite their important role, many hotels are small and medium-sized firms (SME) that are struggling to survive against fierce competition. Experts agree that strategic planning is vital for SME survival, but it is not wholly applicable for SME managers. Meanwhile, Mintzberg's concept of crafting strategy offers a more productive insight into SME strategic planning, but its abstract nature has historically discouraged empirical research on its practical benefits. This study will be the first to empirically explore the operationalization of Mintzberg's crafting strategy characteristics, and analyze its influence on organizational learning using structural equation model. Using a sample of 50 hotels in Bali, Indonesia, this study reveals that managing pattern and stability, detecting discontinuity, and knowing the business have a positive but weak effect, whereas reconciling change and continuity proves to have a positive and significantly strong effect on organizational learning. This study has bridged the gap between the abstract concepts of crafting strategy, which is a potentially better approach for SMEs, with daily operational practices. This study also proves that Mintzberg's approach can be used to predict organizational learning. This relationship is crucial since previous studies concluded that organizational learning improves company performance.

• Steel and Composite Structures
• /
• v.15 no.5
• /
• pp.519-538
• /
• 2013

The design optimization of a cold-formed steel portal frame building is considered in this paper. The proposed genetic algorithm (GA) optimizer considers both topology (i.e., frame spacing and pitch) and cross-sectional sizes of the main structural members as the decision variables. Previous GAs in the literature were characterized by poor convergence, including slow progress, that usually results in excessive computation times and/or frequent failure to achieve an optimal or near-optimal solution. This is the main issue addressed in this paper. In an effort to improve the performance of the conventional GA, a niching strategy is presented that is shown to be an effective means of enhancing the dissimilarity of the solutions in each generation of the GA. Thus, population diversity is maintained and premature convergence is reduced significantly. Through benchmark examples, it is shown that the efficient GA proposed generates optimal solutions more consistently. A parametric study was carried out, and the results included. They show significant variation in the optimal topology in terms of pitch and frame spacing for a range of typical column heights. They also show that the optimized design achieved large savings based on the cost of the main structural elements; the inclusion of knee braces at the eaves yield further savings in cost, that are significant.

• Journal of the Korean housing association
• /
• v.26 no.6
• /
• pp.103-113
• /
• 2015

Modular construction is a process in which a building is produced off-site in module boxes using standard materials. Since the introduction of prefabrication in building construction, Modular Coordination (MC) has become an essential design tool in building design and construction. However, in Korea, the design standardization has not been adequately applied to modular construction. This study intends to analyze the current status of modular construction in Korea and explore the applicability of MC design in the construction industry. The analysis of the current status of MC design within Korean four major modular construction companies indicates that an incremental dimension is not properly used in horizontal planning modules, which results in a problem of increasing construction cost by high material loss rate. But, in vertical planning modules, a incremental dimension of 100 mm (1 M) is found to be used although the structural system varies among manufacturers, which demonstrates the potential for an open system to be well applied in modular construction, despite different structural systems.

• International Journal of High-Rise Buildings
• /
• v.3 no.4
• /
• pp.243-254
• /
• 2014

In this study, a demolition analysis code using the adaptively shifted integration (ASI)-Gauss technique, which describes structural member fracture by shifting the numerical integration point to an appropriate position and simultaneously releasing the sectional forces in the element, is developed. The code was verified and validated by comparing the predicted results with those of several experiments. A demolition planning tool utilizing the concept of a key element index, which explicitly indicates the contribution of each structural column to the vertical load capacity of the structure, is also develped. Two methods of selecting specific columns to efficiently demolish the whole structure are demonstrated: selecting the columns from the largest index value and from the smallest index value. The demolition results are confirmed numerically by conducting collapse analyses using the ASI-Gauss technique. The numerical results suggest that to achieve a successful demolition, a group of columns with the largest key element index values should be selected when explosives are ignited in a simultaneous blast, whereas those with the smallest should be selected when explosives are ignited in a sequence, with a final blast set on a column with large index value.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.1
• /
• pp.11-17
• /
• 2023

In this study, the effect of orchard expansion, structural improvement, and potential demand of the orchard scale-up project implemented since 2004 to strengthen the competitiveness of orchard farmers was examined. The results of the analysis are summarized as follows. First, looking at the effect of scale-up by checking the standard income data of the Rural Development Administration, it was possible to confirm the effect of scale-up in that the income per unit area increases as the scale increases. Second, through the scale-up project, the effect of structural improvement in transferring the orchards of the aged farm households to the younger farm households was confirmed to be 13 years old on average in the case of a sale business and 16 years old in the case of a lease business. Third, it was found that income increased at a statistically significant level after participating in the orchard scale-up project for major fruit crops such as apples, pears, and peaches. Fourth, it was found that age and cultivated area had a statistical effect on the probability of participating in the orchard scale-up project for farmers who did not participate in the project. The potential business demand using the estimated results was found to be between 25,203 and 37,089.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.269-281
• /
• 2016

This research made a evaluation indicators of public management system for operating efficient urban and housing redevelopment. We analyzed how satisfaction of participants about the evaluation indicators are used to parameters and affects intension of participation structure by using PLS structural equation model. We choose result evaluation tools: Foucs Group Interview and Balanced Score Card for appraising public management system. Specifically, We categorized setting business planning and selecting business tool, operating participation groups, motivating participation, post management and sustainability, and economics of business. As a results of the evaluation, setting business planning and selecting business tool, post management and sustainability, and economics of business influence comprehensive satisfaction. Post management and sustainability, economics of business, and setting business planning and selecting business tool turned out that they are very influential in the arranged order.