• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.59-67
• /
• 2000

With increased height of structure, the effect of column shortening need special consideration in the design and construction of high-rise buildings. The shortening of each column affects nonstructural members such as partitions, cladding, and M/E systems, which are not designed to carry gravity forces. The slabs and beams will tilt due to the cumulative differential shortening of adeacent vertical members. The main purpose of estimating the total shortening of vertical structural member is to compensate the differential shortening between adeacent members. This paper presents effect of parameters for phenomenon of column shortening in vertical members. The paper presents effect of parameters for phenomenon of column shortening in vertical members. The conclusions obtained from this study are follow as ; Strength of concrete and steel ratio effected on column shortening caused by elastic and inelastic shortening. Also, it is known that Ultimate-shrinkage-Value, Specific-Creep-Value, and volume to surface ratio effected on inelastic shortening only. Particularly, Ultimate-Shrinkage-Value and Specific-Creep-Value effected considerable on the amount of total column shortening.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.143-147
• /
• 1992

Description of the behavior of the R.C structural members fixed on massive concrete is not normally generalization of recognized configuration for regular R.C. design guidanes. This can be due to the complexity of evaluation of internal resistancy and deflection changes of the members subjected to the various external forces. On the base of axially loaded member fixed on footing, however, the estimation of deflection changes due to flexural force shear force and rotational force is to be carried out in ways of specifying the bond characteristics of axial bars embedded in massive concrete. This work is to quantify adhesion of steel-concrete, initial concrete cracking stress near bar rib, maximum bond stress and residual stress in concrete respectively. In addition to quantification of them for particulate behavior, the suggestions of multi-linear bond stress-slip diagram made in carrying out finite element analyses for adhesion failure, examining concrete cracking status and reviewing existing experimental data lead to alternatively constructed relationship between bond stress and slip for a axial bars embedded massive concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.95-100
• /
• 1996

Creep, drying shrinkage, modulus of elasiticity and Poisson's ratio of concrete are influenced by a number of factors such as mix type, member thickness, curing condition and loading cases. Particularly, creep and shrinkage in concrete have yet to be studied due to its complicated time-dependent properties. In this study, the concrete creep tests were carried out at varous ages of loading-7, 28, 90, 180 and 365 days in order to investigate and quantify its long-term properties. The test procedures and analysis of the test results were also described herein. The results of this study will enable A/E to calculate effective prestressing forces considering time-dependent prestressing loss and evaluate the structural integrity of the prestressing system using the representative values derived from this property test.

• Structural Engineering and Mechanics
• /
• 제84권3호
• /
• pp.311-321
• /
• 2022

In the buildings with long spans and high floors, such as logistics warehouses and semiconductor factories, it is difficult to install supporting posts under beams during construction. Therefore, the size of structural members becomes larger inevitably, resulting in a significant increase in construction costs. Accordingly, a prestressed hybrid wide flange (PHWF) beam with hollowed steel webs was developed, which can reduce construction costs by making multiple openings in the web of the steel member embedded in concrete. However, since multiple openings exist and prestress is introduced only into the bottom flange concrete, it is necessary to identify the shear resistance mechanism of the PHWF beam. This study presents experimental shear tests of PHWF beams with hollowed steel webs. Four PHWF beams with cast-in-place (CIP) concrete were fabricated, with key variables being the width and spacing of the steel webs embedded in the concrete and the presence of shear reinforcing bars, and web-shear tests were conducted. The shear behavior of the PHWF beam, including crack patterns, strain behavior of steel webs, and composite action between the prestressed bottom flange and CIP concrete, were measured and analyzed comprehensively. The test results showed that the steel web resists external shear forces through shear deformation when its width is sufficiently large, but as its width decreased, it exerted its shear contribution through normal deformation in a manner similar to that of shear reinforcing bars. In addition, it was found that stirrups placed on the cross section where the steel web does not exist contribute to improving the shear strength and deformation capacity of the member. Based on the shear behavior of the specimens, a straightforward calculation method was proposed to estimate the web-shear strength of PHWF beams with CIP concrete, and it provided a good estimation of the shear strength of PHWF beams, more accurate than the existing code equations.

• 한국강구조학회 논문집
• /
• 제21권3호
• /
• pp.257-266
• /
• 2009

다이아그리드 노드의 지진 및 바람에 의한 반복하중에 대한 구조성능을 해석적으로 평가하는 것은 용접특성의 반영이 어려워서 한계가 있다. 이 연구에서는 횡하중을 받는 다이아그리드 노드의 구조거동을 알아보기 위해 다이아그리드의 노드부를 축소한 모형을 이용해 실험을 수행했다. 실험체는 총 5개이며 실험의 변수는 각 부분의 용접방법, 측면스티프너와 가새 웨브의 겹침길이이다. 한쪽 대각가새에는 인장력을, 다른쪽 대각가새에는 압축력을 가하는 반복가력 실험을 수행하였다. 실험 결과 주요 파괴 원인은 축력과, 방향이 상이한 두 힘의 합력으로 인한 부가적 모멘트에 의한 작용으로 나타났다. 인장력에 의해서 가새 부재의 플랜지가 파단하였고, 압축력에 의해서 가새 플랜지의 국부좌굴이 일어났다. 또한 겹침길이와 용접타입은 초기 강성, 항복 내력 및 에너지 흡수능력에 영향을 미치는 것으로 나타났다.

• Smart Structures and Systems
• /
• 제21권1호
• /
• pp.53-64
• /
• 2018

Nondestructive testing methods are required to assess the condition of civil structures and formulate their maintenance programs. Axial force identification is required for several structural members of truss bridges, pipe racks, and space roof trusses. An accurate evaluation of in situ axial forces supports the safety assessment of the entire truss. A considerable redistribution of internal forces may indicate structural damage. In this paper, a novel compressive force identification method for prismatic members implemented using static deflections is applied to steel beams. The procedure uses the Euler-Bernoulli beam model and estimates the compressive load by using the measured displacement along the beam's length. Knowledge of flexural rigidity of the member under investigation is required. In this study, the deflected shape of a compressed steel beam is subjected to an additional vertical load that was short-term measured in several laboratory tests by using fiber Bragg grating-differential settlement measurement (FBG-DSM) sensors at specific cross sections along the beam's length. The accuracy of midspan deflections offered by the FBG-DSM sensors provided excellent force estimations. Compressive load detection accuracy can be improved if substantial second-order effects are induced in the tests. In conclusion, the proposed method can be successfully applied to steel beams with low slenderness under real conditions.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권3호
• /
• pp.102-113
• /
• 2017

비정형 판 부재의 탄소성 좌굴 강도를 평가할 수 있는 새로운 지표를 제안하였다. 부재 경계면에 작용하는 하중 또는 경계면의 변화에 따른 외부일 또는 변형에너지를 부재의 평형 변형경로에 따라 계산하고, 이 에너지의 이차 변분량의 부호가 양에서 음으로 바뀌는 시점을 안정한계로 제안하였다. 판 부재의 단면력을 등분포 또는 선형으로 근사한 상태로 단면력을 사용하여 좌굴한계를 평가하는 현 기법과는 반대로 단면력의 변화가 비선형적인 복잡한 경우에도 간단히 좌굴한계를 평가할 수 있다. 선형탄성 문제에 대해서는 본 기법의 결과와 전통적인 방법이 동일한 결과를 도출한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권2호
• /
• pp.175-186
• /
• 2006

FRP 시스템으로 보강된 철근콘크리트 단면 대부분이 철근콘크리트로 구성되어 있어 휨해석 및 휨설계를 직사각응력블록을 이용한 강도설계법에 의존하는 경향이 있다. 그러나, 보강단면의 인장철근 및 FRP시스템에 의한 인장력이 부족한 단면의 FRP 시스템의 변형률이 인장파단변형률을 초과하면 강도설계법을 적용할 수 없는 해석상 모순에 빠져든다. 인장철근과 탄소섬유시트에 의한 인장력이 낮은 탄소섬유시트 보강보 실험에서 콘크리트 최대압축변형률이 0.003보다 낮은 것으로 측정되었을 뿐 아니라 최대휨모멘트는 강도설계법으로 산정된 공칭휨모멘트보다 작은 것으로 측정되어, FRP 시스템 보강단면의 공칭휨모멘트 산정에 강도설계법의 적용한계가 있는 것으로 나타났다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.88-96
• /
• 1995

Seismic design provisions in Korea has developed based on seismic provisions in United States (e.g., ATC 3-06). Current seismic design provisions in U .S. is moving toward adopting enhanced concept for design. Federal Emergence Management Agency (FEMA) Provides the NEHRP recommended Provisions for the Development of Seismic Regulations for New Buildings which can be used as a source document for use by any interested members of the building community. Current seismic design provisions in U .S. generally use a uni-level force. These provisions can not be satisfied if the limit state design is concerned. Limit state can be defined as a state causing undesirable performance o( a structure (e .g., serviceability, ultimate, buckling, etc.). Even if there are provision for controlling drift by two levels, it is still difficult to satisfy limit states using uni-level force. Architectural Institute of Japan (AIJ) uses a hi-level forces Int seismic loadings which can satisfy serviceability and ultimate limit state. However, the seismic parameters used in AIJ guideline are basically determined by subjective manner of code committee member and professions. These parameters need to be determined based on target quantities (target reliability, target energy dissipation, target displacement, target stress level, etc.). This study develops the method to determine the sesmic design parameters based on a certain taget level. Reliability is used as a target level and load factors in ANSI/ASCE 7-88 are selected as design parameters to be determined.

• Journal of the Korean Wood Science and Technology
• /
• 제42권1호
• /
• pp.20-26
• /
• 2014

본 연구에서는 유한요소해석을 이용하여 응력적층 바닥판의 구조성능을 평가하였다. 바닥판의 구조성능은 처짐과 응력, 압체력의 변화로 평가할 수 있다. 하중 재하 후 바닥판의 처짐 형상을 확인한 결과 하나의 판처럼 거동하는 것을 확인하였다. 이는 압체력에 의해 각 부재 사이에 마찰력이 작용했기 때문이다. 또한 초기 압체력과 산출된 압체력을 비교한 결과 바닥판의 처짐과 함께 압체력이 감소했다. 이는 하중에 의해 바닥판의 변형이 발생하면서 작용하는 힘이 줄어듦에 따라 압체력이 감소한 것으로 판단된다. 그러나 재료의 소성 특성이 제대로 반영되지 않았기 때문에 잔류응력과 잔류변형이 고려되지 않았으므로 추후 이에 대한 연구가 필요하다.