• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.603-609
• /
• 2022

Bottom hole assembly(BHA) is a key component of the drilling system, consisting of various components and tools(including the drill bit and mud motor) which operate at the bottom of the wellbore and physically drill the rock. This paper investigates the dynamic characteristics of the mud motor which is a drilling propulsion tool. And computational structural analysis is performed to calculate the von-Mises stress and the safety factor of components constituting the mud motor. In this process, the field test data of onshore drilling are used for analysis.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1842-1850
• /
• 2017

Reducing the noise and vibration of the BLDC motors is very essential for some special applications. In this paper, a new structural design is introduced to increase the natural frequencies of the stator in BLDC motors as increasing the natural frequencies can reduce the severe effects of the structural resonances, including high levels of noise and vibration. The design is based on placing a single hole on definite regions at the stator cross sectional area (each region contains one tooth and its upper parts in the stator yoke) in an optimum way by which the natural frequencies at different modes are shifted to the higher values. The optimum diameter and locations for the holes are extracted by the Response Surface Methodology (RSM) and the modal analyses in the iterative process are done by Finite Element Method (FEM). Moreover, the motor performance by the optimum stator structure is analyzed by FEM and compared with the prototype motor. Preventing the stator magnetic saturation and the motor cogging torque enhancement are the two constraints of the optimization problem. The optimal structural design method is applied experimentally and the validity of the design method is confirmed by the simulated and experimental results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.45-55
• /
• 2012

The road luminaires have been treated as subsidiary electric apparatuses in the road although they are indispensable facilities which people use the road safely. Because of this misunderstanding, there are not many researches on luminaire supports against the wind loads. Therefore, a typhoon has overturned or damaged many luminaire supports without having sufficient structural safeties. The purpose of this study is to review the current design criteria and to suggest the improvement of design methods based on the structural safety and compatible with the site conditions of luminaire supports. The stress concentration around the inspection hole, which causes the collapse of luminaire supports, is analyzed and stress reduction method is suggested with the improved design methods.

• Structural Engineering and Mechanics
• /
• v.31 no.4
• /
• pp.439-451
• /
• 2009

The paper deals with the problem related to the modelling of riveted assemblies for crashworthiness analysis of full-scale complete aircraft structures. Comparisons between experiments and standard FE computations on high-energy accidental situations onto aluminium riveted panels show that macroscopic plastic strains are not sufficiently localised in the FE shells connected to rivet elements. The main reason is related to the structural embrittlement caused by holes, which are currently not modelled. Consequently, standard displacement FE models do not succeed in initialising and propagating the rupture in sheet metal plates and along rivet rows as observed in the experiments. However, the literature survey show that it is possible to formulate super-elements featuring defects that both give accurate singular strain fields and are compatible with standard displacement finite elements. These super-elements can be related to the displacement model of the hybrid-Trefftz principle of the finite element method, which is a kind of domain decomposition method. A feature of hybrid-Trefftz finite elements is that they are mainly used for elastic computations. It is thus proposed to investigate the possibility of formulating a hybrid displacement finite element, including the effects of a hole, dedicated to crashworthiness analysis of full-scale aeronautic structures.

• Structural Engineering and Mechanics
• /
• v.69 no.5
• /
• pp.537-545
• /
• 2019

Stress analysis of bottom-hole rock has to be considered with much care to further understand rock fragmentation mechanism and high penetration rate. This original study establishes a fully coupled simulation model and explores the effects of overburden pressure, horizontal in-situ stresses, drilling mud pressure, pore pressure and temperature on the stress distribution in bottom-hole rock. The research finds that in air drilling, as the well depth increases, the more easily the bottom-hole rock is to be broken. Moreover, the mud pressure has a great effect on the bottom-hole rock. The bigger the mud pressure is, the more difficult to break the bottom-hole rock is. Furthermore, the maximum principal stress of the bottom-hole increases as the mud pressure, well depth and temperature difference increase. The bottom-hole rock can be divided into three main regions according to the stress state, namely a) three directions tensile area, b) two directions compression areas and c) three directions compression area, which are classified as a) easy, b) normal and c) hard, respectively, for the corresponding fragmentation degree of difficulty. The main contribution of this paper is that it presents for the first time a thorough study of the effect of related factors, including stress distribution and temperature, on the bottom-hole rock fracture rather than the well wall, using a thermo-poroelastoplasticity model.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.42.2-42.2
• /
• 2013

We investigate the cosmic evolution of the black hole mass-bulge luminosity relation with a sample of 52 moderate-luminosity AGNs at $z{\simeq}0.36$ and $z{\simeq}0.57$, corresponding to look-back times of 4 and 6 Gyrs. By employing robust multi-component spectral and structural decomposition methods to the obtained high-quality Keck spectra and high-resolution HST images, black hole masses ($M_{BH}$) are estimated from the Hbeta broad emission line with the 5100A nuclear luminosity, and bulge luminosities ($L_{bul}$) are derived from the surface photometry. Based on these consistent measurements, we constrain the redshift evolution of the $M_{BH}-L_{bul}$ relation by performing the Monte Carlo simulations designed to account for selection effects. We provide implications of our results in terms of the black hole-galaxy co-evolution and discuss possible bulge growth mechanisms.

• Structural Engineering and Mechanics
• /
• v.51 no.1
• /
• pp.111-130
• /
• 2014

The aim of this study is to investigate the effects of the beam aspect ratio(L/h), hole diameter, hole location and stacking layer sequence ($[0/45/-45/90]_s$, $[45/0/-45/90]_s$ and $[90/45/-45/0]_s$) on natural frequencies of glass/epoxy perforated beams under room and high (40, 60, 80, and $100^{\circ}C$) temperatures for the common clamped-free boundary conditions (cantilever beam). The first three out of plane bending free vibration of symmetric laminated beams is studied by Timoshenko's first order shear deformation theory. For the numerical analyses, ANSYS 13.0 software package is utilized. The results show that the hole diameter, stacking layer sequence and hole location have important effect especially on the second and third mode natural frequency values for the short beams and the high temperatures affects the natural frequency values significantly. The results are presented in tabular and graphical form.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.100-108
• /
• 2017

Because of urbanization, Industrialization and expansion of transportation network, blasting works are recently increasing in construction field. The blasting work influences environmental effects to residents and the safety of facilities around the working place, so the development of blasting technology is needed to reduce the damage to residents. The blasting mechanism in the hole was studied and tested in the blasting sites by the difference of diameter between explosives and drilling hole, which is named by the decoupling effect. This effect was tested by changing the medium between explosives and hole wall in three working sites(railway, highway and industrial complex). The vibration velocity of blasting was recorded and vibration equations were produced by regression analyses. Finally, the structure separation distance was derived using these equations. The testing results show that the specific gravity of medium is larger, the separation distance is smaller and the duration time of blasting is shorter in case of large specific gravity of medium, so the vibration effect stops more fastly in the water compared with the air.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.3 s.40
• /
• pp.301-309
• /
• 1999

The purpose of this study is to develop a method to deduce existing stress of steel member in inelastic range. Based on the previous experimental study, modified factor method considering the local plastification due to stress concentration was proposed. Finite element analysis was performed to investigate the stress distribution around hole and the results of the finite element analysis were compared with those from the Hole Drilling Method in elastic-plastic range. As a result of applying a modified factor method, proposed method shows very good approximation of 2% error for exact value of stress in the plastic range.

• Structural Engineering and Mechanics
• /
• v.81 no.1
• /
• pp.39-50
• /
• 2022

Layer separation (delamination) is an essential threat to fiber-reinforced polymer (FRP) plates under dynamic, static, and fatigue loads. Under compressive load, the growth of delamination will lead to structural instability. The aim of this paper is to present a method using shape memory alloy (SMA) stitches to suppress the delamination growth in a FRP plate and to improve the buckling behavior of the plate with a rectangular hole. The present paper is divided into two parts. Firstly, a closed-form (CF) formulation for evaluating the buckling load of the FRP plate is presented. Secondly, the finite element method (FEM) will be employed to calculate the buckling loads of the plates which serves to validate the results obtained from the closed-form method. The novelty of this work is the development of the closed-form solution using the p-Ritz energy approach regarding the stress-dependent phase transformation of SMA to trace the equilibrium path. For the FEM, the Lagoudas constitutive model of the SMA material is implemented in FORTRAN programming language using a user material subroutines (VUMAT). The model is simulated in ABAQUS/Explicit solver due to the nature of the loading type. The cohesive zone model (CZM) is applied to simulate the delamination growth.