Browse > Article
http://dx.doi.org/10.12989/sem.2014.51.1.111

Free vibration analysis of laminated composite beam under room and high temperatures  

Cunedioglu, Yusuf (Department of Mechanical Engineering, Faculty of Engineering, Nigde University)
Beylergil, Bertan (Department of Mechanical Engineering, Faculty of Engineering, Izmir Institute of Technology)
Publication Information
Structural Engineering and Mechanics / v.51, no.1, 2014 , pp. 111-130 More about this Journal
Abstract
The aim of this study is to investigate the effects of the beam aspect ratio(L/h), hole diameter, hole location and stacking layer sequence ($[0/45/-45/90]_s$, $[45/0/-45/90]_s$ and $[90/45/-45/0]_s$) on natural frequencies of glass/epoxy perforated beams under room and high (40, 60, 80, and $100^{\circ}C$) temperatures for the common clamped-free boundary conditions (cantilever beam). The first three out of plane bending free vibration of symmetric laminated beams is studied by Timoshenko's first order shear deformation theory. For the numerical analyses, ANSYS 13.0 software package is utilized. The results show that the hole diameter, stacking layer sequence and hole location have important effect especially on the second and third mode natural frequency values for the short beams and the high temperatures affects the natural frequency values significantly. The results are presented in tabular and graphical form.
Keywords
layered structures; cut-out; natural frequencies; finite element analysis;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Aksu, G. and Ali, R. (1976), "Determination of dynamic characteristics of rectangular plates with cut-outs using a finite difference formulation", J. Sound Vib., 44(1), 147-158.   DOI   ScienceOn
2 Alam, M.N., Upadhyay, N.K. and Anas M. (2012), "Efficient finite element model for dynamic analysis of laminated composite beam", Struct. Eng. Mech, 42(4), 471-488.   DOI
3 Bezazi, A., El Mahi, A., Berthelot, J.M. and Bezzazi, B. (2001), "Analyse de l'endommagement des stratifies en flexion 3-points", Proceedings of the XVeme Congres Francais de Mecanique, France, September.
4 Bezazi, A., El Mahi, A., Berthelot, J.M. and Bezzazi, B. (2003a), "Flexural fatigue behavior of cross-ply laminates: An experimental approach", Strength Mater., 35(2), 149-161.   DOI   ScienceOn
5 Bezazi, A., El Mahi, A., Berthelot, J.M. and Kondratas, A. (2003b), "Investigation of cross-ply laminates behavior in three-point bending tests. Part II: Cyclic fatigue tests", Mat. Sci., 9(1), 128-133.
6 Chandrashekhara, K. and Bangera, K.M. (1992), "Free vibration of composite beams using a refined shear flexible element", Comput. Struct., 43(4), 719-727.   DOI   ScienceOn
7 Davidson, B.D., Kruger, R. and Konig, M. (1995), "Three-dimensional analysis of center-delaminated unidirectional and multidirectional single-leg bending specimens", Compos. Sci. Technol., 54(4), 385-394.   DOI   ScienceOn
8 El Mahi, A., Berthelot, J.M. and Brillaud, J. (1995), "Stiffness reduction and energy release rate of cross-ply laminates during fatigue tests", Compos. Struct., 30(2), 123-130.   DOI   ScienceOn
9 Hassan, G.A., Fahmy, M.A. and Mohammed, I.G. (2009), "Effects of fiber orientation and laminate stacking sequence on out-of plane and in-plane bending natural frequencies of laminated composite beams", Proceedings of 9th PEDAC Conference, Egypt, February.
10 Teboub, Y. and Hajela, P. (1995), "Free vibration of generally layered composite beams using symbolic computations", Compos. Struct., 33(3), 123-134.   DOI   ScienceOn
11 Kim, N.I. and Choi D.H. (2013), "Super convergent laminated composite beam element for lateral stability analysis", Steel Compos. Struct., 15(2), 175-202.   DOI   ScienceOn
12 Shi, G. and Lam, K.Y. (1999), "Finite-element vibration analysis of composite beams based on a higherorder beam theory", J. Sound Vib., 219(4), 707-721.   DOI   ScienceOn
13 Sun, C.T. and Jen, K.C. (1987), "On the effect of matrix cracks on laminate strength", J. Reinf. Plast. Comp., 6(3), 208-223.   DOI   ScienceOn
14 Teh, K.K. and Huang, C.C. (1979), "The vibrations of generally orthotropic beams, a finite element approach", J. Sound Vib., 62(2), 195-206.   DOI   ScienceOn
15 Hodges, H.D., Atilgan, A.R., Fulton, M.V. and Rehfield, L.W. (1991), "Free vibration analysis of composite beams", J. Am. Helicopt. Soc., 36(3), 36-47.   DOI
16 Kim, C.S., Young, P.G. and Dickinson, S.M. (1990), "On the flexural vibration of rectangular plates approached by using simple polynomials in the Rayleigh-Ritz method", J. Sound Vib., 143(3), 379-394.   DOI   ScienceOn
17 Kisa, M. (2004), "Free vibration analysis of a cantilever composite beam with multiple cracks", Compos. Sci. Technol., 64(9), 1391-1402.   DOI   ScienceOn
18 Krishnaswamy, S., Chandrahekhara, K. and Wu, W.Z.B. (1992), "Analytical solution to vibration of generally layered composite beams", J. Sound Vib., 159(1), 85-99.   DOI   ScienceOn
19 Kwon, Y.W. and Bang, H. (2000), The finite element method using Matlab, 2nd Edition, Dekker Mechanical Engineering Series, CRC Press, Boca Raton.
20 Lee, C.Y., Liu, D. and Lu, X. (1992), "Static and vibration analysis of laminated composite beams with an interlaminar shear stress continuity theory", Int. J. Numer. Meth. Struct. Eng., 33(2), 409-424.   DOI
21 Lee, H.S. (1984), "Transverse vibration of rectangular plates having an inner cutout in water", J. Soc. Nav. Arch. Korea, 21(1), 21-34.   과학기술학회마을
22 Maiti, K.D. and Sinha, P.K. (1994), "Bending and free vibration analysis of shear deformable laminated composite beams by finite element method", Compos. Struct., 29(4), 421-431.   DOI   ScienceOn
23 Paramasivam, P. (1973), "Free vibration of square plates with square opening", J. Sound Vib., 30(2), 173- 178.   DOI   ScienceOn
24 Ram, K.S. and Sinha, P.K. (1992), "Hygrothermal effects on the free vibration of laminated composite plates", J. Sound Vib., 158(1), 133-148.   DOI   ScienceOn
25 Sakiyama, T., Huang, M., Matsuda, H. and Morita, C. (2003), "Free vibration of orthotropic square plates with a square hole", J. Sound Vib., 259(1), 63-80.   DOI   ScienceOn
26 Aktas, M. and Karakuzu, R. (2009), "Determination of mechanical properties of glass-epoxy composites in high temperatures", Polym. Compos, 30(10), 1347-1441.
27 Abramovich, H. (1992), "Shear deformation and rotary inertia effects of vibrating composite beams", Compos. Struct., 20(3), 165-173.   DOI   ScienceOn
28 Abramovich, H., Eisenberger, M. and Shulepov, O. (1995), "Dynamic stiffness matrix for symmetrically laminated beams using a first order shear deformation theory", Compos. Struct., 31(4), 265-271.   DOI   ScienceOn
29 Khdeir, A.A. (1994), "Free vibration of cross-ply laminated beams with arbitrary boundary conditions", Int. J. Eng. Sci., 32(12), 1971-1980.   DOI   ScienceOn
30 Sharma, A.K. and Mittal, N.D. (2010), "Review on stress and vibration analysis of composite plates", J. Appl. Sci., 10(23), 3156-3166.   DOI
31 Rajamani, A. and Prabhakaran, R. (1977), "Dynamic response of composite plates with cut-outs. Part II:Clamped-clamped plates", J. Sound Vib., 54(4), 565-576.   DOI   ScienceOn