• 한국공간구조학회논문집
• /
• 제11권3호
• /
• pp.95-103
• /
• 2011

비정형 초고층건물을 위한 구조시스템 중에서 다이어그리드 구조시스템은 구조적인 효율성 및 조형성 때문에 널리 사용되고 있다. 근래에는 초고층건물을 위한 구조시스템으로 메가부재의 조합을 통하여 횡방향 강성을 효과적으로 발휘할 수 있는 메가프레임 시스템이 널리 사용되고 있다. 두 가지 구조시스템의 장점을 혼합한 다이어그리드 메가프레임 구조시스템은 미래형 초고층건물에 적용될 유망한 구조시스템으로 평가받고 있다. 그러나 이러한 다이어그리드 메가프레임 구조시스템을 적용한 건물의 거동을 예측하기 위해서는 매우 많은 수의 절점과 요소로 이루어진 유한요소 모델을 해석해야 하므로 상당한 양의 해석시간과 엔지니어의 노력이 필요하게 된다. 따라서 본 연구에서는 다이어그리드 메가프레임시스템을 적용한 초고층건물의 거동을 효율적으로 해석할 수 있는 기법을 제안하여 다이어그리드 메가프레임 초고층건물의 해석과 설계에 소요되는 시간과 노력을 줄이고자 한다. 이를 위하여 다이어그리드 메가프레임의 특정을 활용한 효율적인 모형화기법과 행렬응축기법을 사용하여 해석에 사용되는 자유도수를 최소화한 해석기법을 제안하였다. 예제구조물의 해석을 수행하여 본 연구에서 제안된 해석방법과 일반적인 해석방법에 의한 결과와 비교함으로써 제안된 방법의 효율성과 정확성을 검증하였다.

• Structural Engineering and Mechanics
• /
• 제14권3호
• /
• pp.365-380
• /
• 2002

Following a series of experiments on isolated low-rise RC shear walls with openings, a theoretical study on the backbone curve of a perforated shear wall shows that there are some important observations from experimental results that make clear a semi-empirical formula of the backbone curve of a perforated wall. Critical shear zones can be depicted from the configuration of shear walls with openings. Different factors, including the size and location of shear wall openings, the wall's height/width ratio, horizontal and vertical steel bar ratios, and location and amount of diagonal steel bars are involved in the derivation of the backbone curve. Bending and shear effects are also considered in the paper. In addition, a comparison of load and displacement for solid and perforated shear walls is discussed. Generally, the comparison between experimental curves and computed backbone curves is favorable.

• 도시과학
• /
• 제6권2호
• /
• pp.73-80
• /
• 2017

A submittal, as a part of three main project management processes: production control, submittals and change orders, is the transmission of information from the subcontractor to the general contractor to the owner, architect, and structural engineer, for review and approval. The purpose of the submittal process is for submittals to be approved in order to start construction. This benefits the contractor by ensuring that the finished project will meet the expectations of the owner. This paper analyzed a case study regarding the submittal process for the local-based environmental construction company, which typically works as a subcontractor and may hire other subcontractors for additional work when applicable. The aim of this study was to roughly evaluate a project management process and understand the submittal process through the study of a case involving the local company.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 정보화시공 학술발표회
• /
• pp.61-78
• /
• 2001

Various kind of fiber optic gauge sensors are available that can be bonded to civil engineering structures such as bridges, dams, tunnels and pipelines. A new fiber optic long gauge has significant advantages over other fiber optic sensors. These gauges can vary in length from less than 10 cm up to 30 m and provide the structural engineer with accurate measurements of displacement. These displacements can be converted to strains by dividing the measurement by the long gauge length. Using new optical technology, the long gauge instrument developed by FOX-TEK can choose max. 30 meters of gauge length so as to measure the very early stress/strain correlation curve. And this gauge length to be extended up to 100 meter in 2002.

• 건축역사연구
• /
• 제2권1호
• /
• pp.91-112
• /
• 1993

This study aims to clarify a history and its external conditions of collegiate education of architecture in Korea from 1945 to 1961. To reveal the process of formation of architectural education of this period, my analysis is chiefly concerned with the organization and of its curriculum in terms of policies of Ministery of Education, especially focused in case of Dept. of Architecture in Seoul National University, I attempted to describe the complex interactions between the structural conditions and results within and without the education system and the more general social, economic, and political contexts that pertained during those years, 8.15 Emancipation, Korean War, and Post-war Rehabilitation period. We may summarize them in part by saying the reception in Korea of the American influence was done through educational ideas, policies, systems, and various aid programs. The social raison d'etre of architectural education in Korea has been to produce technologically skilled man in the sense of engineer.

• 기술사
• /
• 제43권6호
• /
• pp.31-34
• /
• 2010

Recently, due to localized heavy rain and flash floods in urban areas is becoming more frequent flood damage. To prevent flood inundation damage, to formulate the diverse directions in connection with the drainage system of buildings, roads, sewerage, pump stations, detention (retention) pond, and streams is very important. In addition, it is important for the uniform design criteria, the consistent of hydrologic and hydraulic analysis method, and a flood disaster mitigation systems connected with structural and nonstructural measures. To accomplish this, the method such as installation of storage facilities, infiltration facilities, and underground water tank, the optimal size of the design gutter and grate of the road, ensure the capacity of pumping stations, and the installation of a flood control channel into the deep underground requires comprehensive measures dimension in urban areas.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.705-710
• /
• 2000

Recently, use of sea-sand as fine aggregates in reinforced concrete structures is increasing because of lacking of supply due to destructive of environment caused by obtaining and exhausting of resource. It rise up issue, some field reconstruction, interrupted construction works occurring to the trouble on the site because sometimes engineer does not agree to use of corroded bar, even slighly corroded. This study investigates the properties of bond strength and the structural behavior of corroded bars before and after placement. The purpose of the study is to present the database estimating degree of damaged bond strength according to corrosion level and deciding on whether using corroded bars or not.

• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.412-420
• /
• 2008

In order to design the large complex structures like VLFS (Very Large Floating Structures), it is essential the cooperation between the experts in various fields; structural engineering expert, fluid mechanics expert, mooring system engineer, and so on. This paper describes the development of an integrated system to support the cooperative design between various experts and project manager. This integrated system is designed to be operated in Web environment and it contains the support of design DB and 3D graphical tool, negotiation tool for task allocation, and various engineering supporting tools for each design step. The user group of this system can be classified as Project Manager, Engineering Expert, DB Builder, and System Administrator. All of the engineering data is saved after and during the process of the design projects and all participants can be connected by Internet without the limit of time or space constraints.

• 국제초고층학회논문집
• /
• 제7권3호
• /
• pp.215-221
• /
• 2018

Buckling-Restrained Braces (BRBs) have been widely applied to tall buildings in seismic areas in the world. In this paper the author summarizes representative types of BRB compositions and shows two cases of special applications of BRBs. In the first case, BRB diagonals for tall building were used to provide stable cyclic nonlinear hysteresis and also used to limit forces generated at columns, connections and walls. The top outriggers are pre-loaded by jacks to resolve long-term differential shortenings between the concrete core wall and concrete-filled steel box columns. The second case is the retrofit work for a communication tower by replacing the insufficiently strong members with BRBs in Japan.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.461-467
• /
• 2007

Exact application of the tensile force is critical to high-tension members in civil engineering structures, and thus actual tensile forces have often been estimated in field. To date, a few methodologies have been presented utilizing static and/or dynamic responses of tension members. Each of these methods has its disadvantages as well as advantages in its procedures, accuracy, and equipment requirements. In this paper, the feasibility of a sensitivity based methodology, based on the relationship between the natural frequencies and the applied tensile force, developed by the authors, is verified using the measured data from a cable-stayed bridge structure. From the results, it is shown that the proposed method can be utilized in estimating the tensile force in tension member of a real structure.