• Mycobiology
• /
• 제47권3호
• /
• pp.329-334
• /
• 2019

Streptomyces blastmyceticus strain 12-6 was isolated from a forest soil sample of Cheonan area on the basis of strong antifungal activities against plant pathogenic fungi. Butanol extracts of the cultural filtrates were active against C. acutatum, C. coccodes, C. gloeosporioides, F. oxysporum, and T. roseum. Active fractions were prepared by thin layer chromatography using silica gel plate; 12-6-2 ($R_f$ 0.36), 12-6-3 ($R_f$ 0.44). Scanning electron microscopy showed that the active fractions caused a change in surface texture of fungal spores from smooth surface to wrinkled surface. The lethal effect on the spores of the active fractions varied from 56% to 100%. It was shown that the spores of C. acutatum were more sensitive to the antifungal fractions than the spores of F. oxysporum. Fluorescence staining using TOTO-1 indicated that the antifungal fractions could make the spores more sensitive to the fluorescence dye. Thus, it was suggested that antifungal agents prepared in this study exhibited the antifungal activity by damaging the plasma membrane of both fungal spores and hyphae. Identification of antifungal agents in the active fraction using GC-MS analysis revealed the presence of cyclo-(Leu-Pro) and 9-octadecenamide as major components that have already been known as antifungal substances.

• 한국결정성장학회지
• /
• 제4권3호
• /
• pp.238-244
• /
• 1994

보로실리케이트 유리기판과 석영기판을 사용하여 $800^{\circ}C~520^{\circ}C$의 온도 범위에서 용액 성장법에 의한 다결정 실리콘 박막의 성장에 관해 조사 하였다. 기판상에는 용애과의 젖음성을 좋게 해주기 위해 박막의 알루미늄츠오가 실리콘층이 증착되었으며, 용매로는 알루미늄과 실리콘옥사이드와의 반응에 의해서 일어난다. 결정립 크기가 수백 마이크론까지 이르는 실리콘을 얻을 수 있었으며, 석영기 판의 경우에는 보르실리 케이트 유리기판보다 강한 (111) 우선 성장 방향을 보여주고 있다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.15-20
• /
• 2016

The effects of electron beam (EB) irradiation on the superconducting critical temperature ($T_c$) and critical current density ($J_c$) of YBCO films were studied. The YBCO thin films were irradiated using a KAERI EB accelerator with an energy of 0.2 MeV and a dose of $10^{15}-10^{16}e/cm^2$. A small $T_c$ decrease and a broad superconducting transition were observed as the EB dose increased. The value of $J_cs$ (at 20 K, 50 K and 70 K) increased at doses of $7.5{\times}10^{15}$ and $2.2{\times}10^{16}e/cm^2$. However, $J_cs$ decreased as the dose increased further. The X-ray diffraction (XRD) analysis showed that the c axis of YBCO was elongated and the full width at half maximum (FWHM) increased as the dose increased, which is strong evidence of the atomic displacement by EB irradiation. The transmission electron microscopy (TEM) showed that the amorphous layer formed in the vicinity of the surfaces of the irradiated films. The amorphous phase was often present as an isolated form in the interior of the films. In addition to the formation of the amorphous phase, many striations running along the a-b direction of YBCO were observed. The high magnification lattice image showed that the striations were stacking faults. The enhancement of $J_c$ by EB irradiation is likely to be due to the lattice distortion and the formation of defects such as vacancies and stacking faults. The decrease in $J_c$ at a high EB dose is attributed to the extension of the amorphous region of a non-superconducting phase.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1081-1086
• /
• 2008

양자 점을 이용한 QD-LED(Quantum Dot - Light Emitting Device)의 소자 제작을 하기 위해서는 양자 점의 균일한 배열이 중요하다. 핵-껍질(core-shell) 구조의 CdSe/ZnS 양자 점을 기판에 고 밀도, 고 균일도로 배열하기 위하여 두 종류의 분자 끈(molecular linker)을 사용하였고, 공정의 단순화와 비용 절감을 위하여 고분자 도장인 PDMS(polydimethylsiloxane)를 이용한 미세접촉인쇄방법으로 양자 점들을 배열하였다. $TiO_2/ITO$ 기판에 양자 점을 고정시켜주는 역할을 하는 분자 끈으로는 2-carboxyethylphosphonic acid(CAPO)를 사용하였고, 양자 점 사이의 인력을 향상시켜주는 분자 끈으로는 1,6-hexanedithiol(HDT)을 사용하였다. 양자 점들의 배열 특성을 주사전자현미경(SEM, scanning electron microscope)과 원자 힘 현미경(AFM, atomic force microscope)으로 분석하였고, 광 발광분광기(PL, photoluminescence spectroscope)로 발광특성을 측정하였다.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.245-252
• /
• 2003

There have been many kinds of hair styling sprays with various setting effects. Consumers have used strong setting effect hair sprays to get a long lasting hold. In recent years, however, more and more consumers have come to prefer a "soft ＆ natural" touch feeling, keeping the same long lasting hold. Nonetheless, the existing approaches to this feature could not respond to the consumers′ needs, since products lose the hold strength if the soft feeling is pursued, and vice versa. We have researched and developed a new products to attain a compatible feature with both long lasting hold and natural feeling. Then, we have developed a new multifunctional hair styling material "Poly Amino Acid Derivative (PAAD)." We have focused on the PAAD′s feature that highly diffuses onto a hair and makes thin and even layer on a hair, and have made trials and errors to improve holding strength. "P AAD" excellently makes hair memorize its curl shape which is as the same effect as existing ordinary acrylic resin. Further more, it leaves a soft and natural touch feeling on the hair. We have accomplished a new Poly Amino Acid Derivative with ambivalent features, "soft ＆ natural finish" and "long lasting hold ", and now we report about it.

• 공업화학
• /
• 제23권6호
• /
• pp.515-520
• /
• 2012

이 총설에서는 개별인식 태그와 바이오센서 등에 사용가능성이 높은 실리콘 기반의 캐패시터와 유기 박막트랜지스터 소자의 제작과 차이점이 논하여 진다. 금속이나 혹은 비금속의 나노입자는 화학물질이나 혹은 바이오분자, 즉, 단백질과 올리고 DNA 등에 표면이 싸여질 수 있으며, 상응하는 목표 바이오분자가 결합되어져 있는 절연체에 자기조립 단일층을 형성할 수 있다. 단일층으로 형성된 나노입자는 정전하 기본단위로서 유기 메모리 소자의 나노 플로팅 게이트로서 역할을 하는 것이다. 특히, 바이오분자의 선택적이고 강한 결합 메카니즘을 통하여도, 메모리 캐패시터나 유기 메모리 박막트랜지스터가 성공적으로 시연되었다. 더불어, 이러한 유기 메모리 소자는 차후 유연기판의 유기전자소자 영역의 발전을 촉진할 것으로 기대된다. 또한, 유기 메모리 박막트랜지스터는 앞으로 새로운 개념의 소자로의 적용이 가능하다.

• 한국입자에어로졸학회지
• /
• 제14권4호
• /
• pp.89-95
• /
• 2018

People's environmental concerns for fine particles in Korea lead to the strong necessity of improving the performance of environmental control systems. Wet electrostatic precipitators (ESPs) are considered as one of the alternatives to overcome the limit of previous dry ESPs, the re-entrainment of collected particles during rapping and back corona problem for high electrical resistivity dusts etc. In this study, a wire-cylindrical ESP with a thin water film has been developed. Particle collection characteristics were compared in the ESP with operations of water film on and off. Particle collection efficiencies at various applied voltages as well as voltage-current curves were almost the same in the ESP with and without a water film. Particle collection performance for PM1.0, PM2.5 and PM10 in the wet ESP with a water film was constantly maintained with operation time even in the high dust loading environment. This results indicate that a uniform water film in our wet ESP was successfully formed with a very thin layer without any dry spot and therefore could continuously clean the collected particles on the inner wall of the ESP without any performance degradation.

• 대한화장품학회지
• /
• 제23권3호
• /
• pp.101-107
• /
• 1997

Phellinus linteus was artificially cultivated in kangwon province in Korea. The air-dried phellinus linteus was frozen in liquid nitrogen tank and powdered in jar. 10g of the powder was extracted with each 200g of ethanol, methanol, distilled water and 1,3-butylene glycol/distilled water 4 hours under refluxing and then the liquidextract was concentrated under reduced pressure. As a result of analysis by high performance liquid chromatography and thin layer chromarography, many kinds of sugar and flavonoids were detected. Also we knew that phellinus linteus' extract had a strong UV-ray absorption. In the efficacy test for applying to cosmetics, free radical scavenging effect was confirmed. As a result, 2% of sample was the most potent inhibitory effect and the free radical savenging activity, was 0.31%. This is more effective than any other meterial. In the test of antioxidative activity against lipid autoxidation, phellinus linteus' extract had a good effect by 46% while vitamine E was 42.3%. The immunological activity of phellinus linteus was showed through the activation of macrophage cell. Actually, phellinus linteus activated macrophage function of 1.1-1.8 times including nitrite production compared to control. The whitening effect of phellinus linteus was showed through the inhibition of tyrosinase activity, melanin biosynthesis of S. bikiniensis and B-16 melanoma cells. Phellinus linteus' extract was showed strong mushroom tyrosinase inhibitory activity with IC50 value of 0.5% and inhibited melanin biosynthesis with 28mm inhibition zone at 0.005%/paper disc in S. bikinniensis, a bacterium used as an indicator organism in this work. Also it inhibited melanin biosynthesis in B-16 melanoma cells with a minimum inhibitory concentration of 0.134%.

• 한국식품과학회지
• /
• 제25권5호
• /
• pp.456-460
• /
• 1993

전통 기호음료 성분에 의하여 나타나는 기능특성을 조사하기 위한 연구의 일환으로 결명자,들깨, 대추, 모과, 오미자, 오갈피 및 생강 추출물을 ion-exchange chromatography, 유기용매에 의한 분획, silica gel column chromatography, thin layer chromatography에 의하여 여러 가지 획분으로 분획하여 Angiotensin I 전환효소(ACE) 저해작용을 조사한 결과는 다음과 같다. 기호음료 원료에서 추출한 수용성 획분의 ACE 저해작용은 생강>오갈피>오미자>들깨>결명자>모과>대추의 순으로 나타났다. 일반 가정에서 널리 이용되고 있는 결명자에서 분리한 compound C 는 ACE 저해제로 알려져 있는 bradykinin에 비하여 ACE 저해작용이 비교적 낮았다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.3.2-3.2
• /
• 2011

In recent years, inkjet printing technology has received significant attention as a micro/nanofabrication technique for flexible printing of electronic circuits and solar cells, as well for biomaterial patterning. It eliminates the need for physical masks, causes fewer environment problems, lowers fabrication costs, and offers good layer-to-layer registration. To fulfill the requirements for use in the above applications, however, the inkjet system must meet certain criteria such as high frequency jetting, uniform droplet size, high density nozzle array, etc. Existing inkjet devices are either based on thermal bubbles or piezoelectric pumping; they have several drawbacks for flexible printing. For instance, thermal bubble jetting has limitations in terms of size and density of the nozzle array as well as the ejection frequency. Piezoelectric based devices suffer from poor pumping energy in addition to inadequate ejection frequency. Recently, an electrohydrodynamic (EHD) printing technique has been suggested and proposed as an alternative to thermal bubble or piezoelectric devices. In EHD jetting, a liquid (ink) is pumped through a nozzle and a strong electric field is applied between the nozzle and an extractor plate, which induce charges at the surfaces of the liquid meniscus. This electric field creates an electric stress that stretches the meniscus in the direction of the electric field. Once the electric field force is larger than the surface tension force, a liquid droplet is formed. An EHD inkjet head can produce droplets smaller than the size of the nozzle that produce them. Furthermore, the EHD nano-inkjet can eject high viscosity liquid through the nozzle forming tiny structures. These unique features distinguish EHD printing from conventional methods for sub-micron resolution printing. In this presentation, I will introduce the recent research results regarding the EHD nano-inkjet and the printing system, which has been applied to solar cell or thin film transistor applications.