• 제목/요약/키워드: stripping

검색결과 648건 처리시간 0.031초

쓰레기 매립지 MGT 발전 및 유리온실 설계기술개발 (Development of Land Fill Gas(LFG)-MGT Power Generation and Green House Design Technology)

  • 허광범;박정극;이정빈
    • 에너지공학
    • /
    • 제20권1호
    • /
    • pp.13-20
    • /
    • 2011
  • 마이크로 가스터빈의 높은 연료 다양성은 광범위한 범위의 적용처에 적용할 수 있도록 설계되었다. 최근에는 가스터빈 발전시스템의 연료로서, 유기성폐기물의 소화가스와 쓰레기 매립지로부터 발생되는 바이오 가스에 대한 수요가 증가하고 있다. 우리는 매립지 가스를 이용하여 마이크로 가스터빈 열병합 발전시스템의 성능특성 및 운전 특성에 대한 영향을 연구하고 있다. 메탄과 이산화탄소를 동시에 회수하는 공정을 개발하여 현장 실증 플랜트 규모로 시험을 수행하였으며, 유리온실에 농작물의 이산화탄소 고농도 집적을 목적으로 철-킬레이트 화합물을 기본으로 하는 액상촉매를 이용하여 매립지 가스내에 있는 불순물을 저렴한 비용으로 제거하고자 한다. Fe-EDTA(철-킬레이트)를 이용한 내부순환 다판식 기포탑 반응기에 의하여 농축정제와 이산화탄소 제거가 매립지 가스의 최적화 연료화를 추진하였다. 매립지가스의 유량은 0.207 $m^3$/min이고 5.5 kg/$cm^2$의 압력으로 공급되며 메탄농도 70%, 이산화탄소 27%로 공급되도록 농축반응기를 설계하였고 황화수소 99% 제거를 목표로 한다. 유리온실은 마이크로 가스터빈 배가스와 온수를 이용하여 대기중의 이산화탄소 농도에서 1500 ppm의 농도범위로 공급되도록 설계되었다.

몇 가지 아미노산으로 변성한 $[Ru(v-bpy)_3]^{2+}$ 고분자 피막 전극을 이용한 수은의 정량 (Determination of Mercury at Electrodes Modified with Poly-$[Ru(v-bpy)_3]^{2+}$ Incorporating Amino Acids)

  • 차성극
    • 대한화학회지
    • /
    • 제40권8호
    • /
    • pp.542-548
    • /
    • 1996
  • 전기 화학적으로 중합한 $[Ru(v-bpy)_3]^{2+}$의 다양이온성 고분자 피막에 이온교화법으로 회합시킨 리간드, 즉 methionine, serine 및 threonine으로 변성한 전극을 이용하여 용액 중에 수은을 정량하였다. 이때 분석적 신호는 전극 표면에 고정된 수은/리간드 착물의 산화-환원 응답이다. 이 고분자 피막을 전기적으로 중합할 때 사용한 지지 전해질은 $KPF_6$와 TBAP였으며, 각 경우 고분자 형태와 이에 따른 산화벗김전극의 응답을 비교하였다. $KPF_6$을 쓴 경우 수은 정량에 높은 감도를 나타냈는데, 이는 피막의 다공성이 아주 커서 피막의 내부까지 리간드들의 회합이 용이한데서 온 결과이다. 특히, 이고분자 변성 전극은 10회 이상의 정량이 가능하였으며, logi/r 대 log[Hg]로 도시한 검정 곡선이 1.0{\times}10^{-8}{\sim}1.0{\times}10^{-2}M$농도 범위에서 0.99의 좋은 상관관계를 보였고, 각각의 상대 표준편차가 5-8%였다. 사용한 리간드들 중 전기화학적 응답이 가장 큰 serine이 수은과 안정도 상수가 8.54로 가장 컸으며, methionine 과 threonine의 값은 각각 7.80과 7.04였다.

  • PDF

수분민감성 관련 소석회 및 박리방지제 첨가 투수성 가열 아스팔트 혼합물의 최적 함량 평가 (Evaluation of Optimum Contents of Hydrated-Lime and Anti-Freezing Agent for Low-Noise Porous Asphalt Mixture considering Moisture Resistance)

  • 김도완;이상염;문성호
    • 한국도로학회논문집
    • /
    • 제18권6호
    • /
    • pp.123-130
    • /
    • 2016
  • OBJECTIVES : The objective of this research is to determine the moisture resistance of the freeze-thaw process occurring in low-noise porous pavement using either hydrated-lime or anti-freezing agent. Various additives were applied to low-noise porous asphalt, which is actively paved in South Korea, to overcome its disadvantages. Moreover, the optimum contents of hydrated-lime and anti-freezing agent and behavior properties of low-noise porous asphalt layer are determined using dynamic moduli via the freeze-thaw test. METHODS : The low-noise porous asphalt mixtures were made using gyratory compacters to investigate its properties with either hydrated-lime or anti-freezing agent. To determine the dynamic moduli of each mixture, impact resonance test was conducted. The applied standard for the freeze-thaw test of asphalt mixture is ASTM D 6857. The freeze-thaw and impact resonance tests were performed twice at each stage. The behavior properties were defined using finite element method, which was performed using the dynamic modulus data obtained from the freeze-thaw test and resonance frequencies obtained from non-destructive impact test. RESULTS : The results show that the coherence and strength of the low-noise porous asphalt mixture decreased continuously with the increase in the temperature of the mixture. The dynamic modulus of the normal low-noise porous asphalt mixture dramatically decreased after one cycle of freezing and thawing stages, which is more than that of other mixtures containing additives. The damage rate was higher when the freeze-thaw test was repeated. CONCLUSIONS : From the root mean squared error (RMSE) and mean percentage error (MPE) analyses, the addition rates of 1.5% hydrated-lime and 0.5% anti-freezing agent resulted in the strongest mixture having the highest moisture resistance compared to other specimens with each additive in 1 cycle freeze-thaw test. Moreover, the freeze-thaw resistance significantly improved when a hydrated-lime content of 0.5% was applied for the two cycles of the freeze-thaw test. Hence, the optimum contents of both hydrated-lime and anti-freezing agent are 0.5%.

고품위화 정제공정 부산물(SDAR) 활용을 위한 첨가제 개발 및 이를 이용한 아스팔트 혼합물의 실내 공용성능 평가 (Development of Additive to Modify the SDAR (Solvent DeAsphalting Residue) and Laboratory Performance Evaluation of Asphalt Mixture with Modified SDAR)

  • 백철민;양성린;황성도
    • 한국도로학회논문집
    • /
    • 제18권6호
    • /
    • pp.97-104
    • /
    • 2016
  • OBJECTIVES : The objective of this research is to develop additives for the modification of Solvent DeAsphalting Residue (SDAR) to be used as pavement materials, and evaluate the performance of asphalt mixture manufactured using the SDAR modified by developed additives. METHODS : The SDAR generally consists of more asphaltenes and less oil components compared to the conventional asphalt binder, and hence, the chemical/physical properties of SDAR are different from that of conventional asphalt binder. In this research, the additives are developed using the low molecular oil-based plasticizer to improve the properties of SDAR. First, the chemical property of two SDARs is analyzed using SARA (saturate, aromatic, resin, and asphaltene) method. The physical/rheological properties of SDARs and SDARs containing additives are also evaluated based on PG-grade method and dynamic shear-modulus master curve. Second, various laboratory tests are conducted for the asphalt mixture manufactured using the SDAR modified with additives. The laboratory tests conducted in this study include the mix design, compactibility analysis, indirect tensile test for moisture susceptibility, dynamic modulus test for rheological property, wheel-tracking test for rutting performance, and direct tension fatigue test for cracking performance. RESULTS : The PG-grade of SDARs is higher than PG 76 in high temperature grades and immeasurable in low temperature grades. The dynamic shear modulus of SDARs is much higher than that of conventional asphalt, but the modified SDARs with additives show similar modulus compared to that of conventional asphalt. The moisture susceptibility of asphalt mixture with modified SDARs is good if, the anti-stripping agent is included. The performance (dynamic modulus, rutting resistance, and fatigue resistance) of asphalt mixture with modified SDARs is comparable to that of conventional asphalt mixture when appropriate amount of additives is added. CONCLUSIONS : The saturate component of SDARs is much less than that of conventional asphalt, and hence, it is too hard and brittle to be used as pavement materials. However, the modified SDARs with developed additives show comparable or better rheological/physical properties compared to that of conventional asphalt depending on the type of SDAR and the amount of additives used.

해저 석유생산시스템에서 유동안정성 확보를 위한 왁스집적 영향요소 분석 연구 (Analysis of Influential Factors on Wax Deposition for Flow Assurance in Subsea Oil Production System)

  • 정선영;강판상;임종세
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권6호
    • /
    • pp.662-669
    • /
    • 2015
  • 해저 석유생산시스템에서 빈번히 발생하는 왁스집적 문제는 안정적인 석유 생산을 방해하고 높은 비용을 발생시키므로 왁스집적 제어에 대한 관심이 증가하고 있다. 왁스집적 제어를 통한 석유의 유동안정성 확보를 위해서는 왁스집적거동을 신뢰성 있게 예측해야 한다. 이 연구에서는 왁스집적 거동에 큰 영향을 미치는 분자확산, 전단응력효과, 왁스경화 메커니즘을 시뮬레이션 기술에 적용하여 불확실도가 높은 변수인 전단응력계수, 왁스고형물의 공극률, 왁스 열전도도, 분자확산계수와 물과 가스 양이 왁스집적 거동에 미치는 영향에 대한 분석을 단상과 다상 유동 시 층류 유동 조건에서 수행하였다. 그 결과 왁스고형물의 공극률과 분자확산계수가 높아질수록, 전단응력계수가 낮아질수록 왁스집적 두께가 두꺼워지는 것을 확인할 수 있었고 석유의 온도가 왁스집적 위치에 주요하게 영향을 미치는 것으로 판단된다. 물의 양에 따른 왁스집적 시뮬레이션 결과 기존 연구에서 다소 다른 결과들이 존재하나 이 연구 조건에서는 물의 양 40%까지 왁스집적량이 증가하다 감소하는 것을 확인하였고 가스 양이 많아질수록 유체의 액상 내 가벼운 탄화수소 농도 감소로 인해 왁스집적량이 증가하는 것을 파악하였다. 이 연구결과는 향후 현장 또는 현장을 모사한 실험시스템에서의 결과와 시뮬레이션 결과를 매칭하여 해저 유동관에서 왁스집적 거동을 예측하는데 효과적으로 적용될 수 있을 것으로 사료된다.

고강도콘크리트 시공시 측면 거푸집 탈형시기의 결정 (Determination of Removal Time of the Side Form in High Strength Concrete)

  • 한천구;한민철
    • 콘크리트학회논문집
    • /
    • 제16권3호
    • /
    • pp.327-334
    • /
    • 2004
  • 본 연구에서는 초기재령에서 고강도콘크리트의 압축강도 발현 특성 검토 및 해석 그리고 콘크리트와 거푸집간의 부착강도 특성을 분석하며, P형 슈미트해머를 이용한 반발도와 압축강도간의 상관관계를 검토하므로서 실무의 고강도콘크리트 측면 거푸집 탈형과 연관한 관련규정의 적합성을 재검토하고, 아울러 거푸집제거와 연관한 효율적인 품질관리 방법에 대하여 제안하고자 한다. 연구결과에 따르면, W/B가 증가할수록 응결시간은 감소하는 것으로 나타났으며, 본 연구의 범위에서 로지스틱 모델에 의한 강도증진 해석 결과 압축강도 8MPa를 발휘하는 시간과 적산온도는 17${\~}$20시간, $21{\~}25^{\circ}D{\cdot}D$ 정도로 나타났다. 거푸집과 콘크리트의 부착강도는 종결시점에서 가장 크게 나타났으며 그 이후에는 감소함을 보였고, 거푸집에 부착되어 박리되는 콘크리트의 양은 응결이전에 크게 나타났으며, 그 이후에는 점차적으로 감소하는 경향을 보였다. P형 슈미트해머에 의한 반발도 실험결과 압축강도 발현시점보다 약 2${\~}$3시간 정도 빠르게 측정할 수 있으며, 반발도가 32 이상이면 측면 거푸집을 탈형 할 수 있는 시기로 품질관리가 가능할 것으로 판단되었다.

수질유해물질 배출허용기준 설정에 따른 배출시설 비용영향 분석사례 연구: 1,4-Dichlorobenzene을 중심으로 (Case Study of Cost Effect Analysis for Toxic Compounds to Developing Effluent Limitation Standards : Focus on 1,4-Dichlorobenzene)

  • 김경진;김원기;허진;김광인;김재훈;김상훈;염익태
    • 한국물환경학회지
    • /
    • 제26권4호
    • /
    • pp.557-565
    • /
    • 2010
  • Recently, regulations on toxic compounds in aquatic environment have been strengthened in korea due to the increasing public awareness of the water quality. Typically, these regulations include introduction of emerging toxic compounds and stricter effluent limitations for the already regulated compounds. However, too strict regulations may cause excessive burden on the industry. Therefore it is also important to assess the economic impacts when the new effluent limitation guidelines are introduced. The estimation of the additional cost for the wastewater dischargers to meet the new guidelines are based on the selected treatment technology to handle the hazardous substances and the regulatory levels for effluent limitations. To explore the procedures for cost estimation in enforcing new effluent limitations, a case study was performed specially for 1,4-dichlorobenzene. The pollutants of concern are surveyed for different industrial categories and various treatment technologies. For a given pollutant, the general performances of the treatment technologies are surveyed and a representative technology is selected. For a given technology, the capital cost and annual Operation and Maintenance (O&M) cost was calculated. The calculation of baseline costs to operate ordinary treatment technologies is also important. The ratio between the cost for introducing new treatment process and the baseline cost required for conventional technology was used to evaluate the economic impact on the industry. For 1,4-dichlorobenzene, steam stripping and activated carbon processes were selected as the specific treatment technologies. The cost effects to the regulation of the compound were found to be 6.4% and 14.5% increase in capital cost and O&M cost, respectively, at the flow rate over $2,000m^3/d$ for the categories of synthetic resin and other plastics manufacturing industry. For the case of petrochemical basic compounds manufacturing industry, the cost increases were 5.8% and 12.4%, respectively. It was suggested that cost effect analysis to evaluate the economic impacts of new effluent limitations on the industry is crucial to establish more balanced and reasonable effluent limitations to manage the industrial wastewater containing emerging toxic compounds in the wastewater.

혈관질환의 외과적 고찰 (Surgical Observation on the Vascular Diseases -A Report of 174 Cases-)

  • 채헌;이영;노준량;김종환;서경필;이영균
    • Journal of Chest Surgery
    • /
    • 제9권1호
    • /
    • pp.10-19
    • /
    • 1976
  • One hundred and seventy-four patients were treated in this Department since 1956. One hundred and fifteen patients of them were surgically treated. They were classified on the basis of the disease entity as follows; 48 case of thrombo-angiitis obliterance, 8 cases of Leriche syndrome, 12 cases of arterial embolism, 36 arterial aneurysm, 5 arterio-venous fistula, 15 arterial and venous injuries, 8 pulseless diseases, 2 coarctation of aortas, 15 varicose veins, 12 thrombophlebitis, 9 superior venacaval syndromes, 2 inferior vena caval obstructions and Raynaud's diseases. All the cases of the Burger's diseases were males, and half of them were in the fourth decades, 39 cases underwent undergone unilateral or bilateral sympathectomies. All the Leriche syndromes were males aged over fifty. Three cases out of six were suffering from diabetes mellitus. 2 cases underwent aorto-femoral bypass graft with Y-shaped dacrons. And two embolectomies were performed in 2 cases. Eight cases of arterial embolisms among 12 had mitral valvular diseases with auricular fibrillation The most common site of lodgement of emboli was femoral artery. Nine out of 14 underwent embolectomies with Fogarty catheters. There were 14 peripheral arterial aneurysms, 16 thoracic and/or abdominal aortic aneurysms, and 4 dissecting aneurysms. Most frequent cause of peripheral arterial aneurysms were external trauma. Thoracic and abdominal aortic aneurysms were non-traumatic. And four cases of the dissecting aneurysms had significant hypertension and aged over fifty. Among 5 cases of arteriovenous fistulas, 2 cases hand typical Branham's sign, and they were normalized after operation. Eight cases of pulseless disease were females and aged from three to twenty-five. Three out of them were treated surgically using dacron prosthetic grafts, but the results of the surgery were variable and not satisfactory. A case of coarctation of aorta was treated surgically with an excellent result. Fourteen out of 15 varicose veins underwent ligation of the saphenous vein system, exstirpation of the varicose veins, stripping or some combination of these methods. Two cases of superior vena caval syndromes were operated by bypass graft between the left innominate vein and the right auricle. Two cases of inferior vena caval obstructions were operated upon through right atrial route using extracorporial circulation. All the four cases of vena caval obstructions showed excellent results postoperatively. Two cases out of 12 thrombophlebitis underwent thrombectomies. One of two Raynaud's diseases was surgically treated with an excellent result.

  • PDF

탈황(脫黃) 폐촉매(廢觸媒)로부터 유가금속(有價金屬) 추출(抽出) (Extraction of Valuable Metals from Spent Desulfurizing Catalyst)

  • ;김동진;백승배;이성원
    • 자원리싸이클링
    • /
    • 제20권3호
    • /
    • pp.48-54
    • /
    • 2011
  • 황산으로 탈황 폐촉매를 침출한 결과 황산농도 1 M, 반응시간 1 hr인 실험조건에서 Ni 및 V은 95% 이상, 그리고 Mo은 30%가 침출되었다. 탈황 폐촉매의 Mo matrix 특성으로 인하여 다른 금속에 비하여 Mo의 침출율이 낮았으며, 본 침출반응은 확산반응에 의하여 제어되는 것으로 판단된다. Mo을 완전히 침출하기 위하여 유황성분이 제거된 폐촉매로 침출실험을 실시하였다. 1M 황산으로 처리후 탄산나트륨으로 세척시 Ni, Mo 그리고 V의 침출율은 99% 이었다. Ni 2 g/L; V 9 g/L, Mo 0.6 g/L 조성의 침출액을 LIX 841로 용매추출한 조건에서 A:O 비 5:2, 2단계로 처리시 Mo은 98% 이상 추출되었으며 A:O 비 5:3, 2단계로 처리시 V은 82%가 추출되었다.

청기산(淸肌散)이 아토피피부염 동물 모델에 미치는 영향 (Therapeutic Effects of Cheonggi-san Extract on NC/Nga Mice with Atopic Dermatitis-like Skin Lesions)

  • 구영희;홍승욱
    • 대한한의학회지
    • /
    • 제29권1호
    • /
    • pp.179-191
    • /
    • 2008
  • Background and Objectives : Atopic dermatitis is a recurrent or chronic eczematous skin disease with severe pruritus,and has increased in Korea. Although the pathogenic mechanisms of atopic dermatitis are yet unknown, recently skin barrier dysfunction and hyperresponsive Th2 cells in the acute phase have been reported as important mechanisms. Cheonggi-san(CGS) is used in oriental clinics for treatingacute skin lesions of eczema or urticaria. There have been no studies on the therapeutic mechanism of CGS for curing atopic dermatitis. We aimed to find out the therapeutic effects of its internaluse on atopic dermatitis-like skin lesions, induced in NC/Nga mice by the mite antigen D. pteronyssinus and disrupting skin barrier. Materials and Methods : The NC/Nga mice were classified into three groups: control group, atopic dermatitis elicitated group(AD), and CGS treated group (CT). Atopic dermatitis-like skin lesions were induced on the back of female NC/Nga mice, 12 weeks of age, by tape stripping, 5% SDS applied to disrupt skin barrier and painting 3 times a week with D. pteronyssinus crude extract solution for 3 weeks. CT was treated with CGS orally after atopic dermatitis was elicitated. We observed changes of skin damage, mast cells, substance P, angiogenesis, skin barrier, Th2 cell differentiation, nuclear factor-${\kappa}B(NF-{\kappa}B)$ p65 activation and COX-2 in NC/Nga mice with atopic dermatitis-like skin lesions. Results : The skin damages as eczema were seenin AD, but mitigated in CT. The degranulated mast cells in dermal papillae increased in AD, but decreased in CT. The substance P positive reacted cells in CT remarkably decreased. The angiogenesis increased in AD, but decreased in CT. The decrease of lipid deposition and ceramide in AD was seen, but anincrease of lipid deposition and ceramide in CT was seen. The distribution of IL-4 positive reacted cells in dermal papillae increased in AD, but decreased in CT. The distribution of NF-${\kappa}B$ p65 positive reacted cells & COX-2 positive reacted cells in CT decreased. Conclusion : The results may suggest that the CGS per os decreases the dysfunction of the skin barrier, inhibits Th2 cell differentiation and inhibits NF-${\kappa}B$ p65 activation in NC/Nga mice with atopic dermatitis-like skin lesions.

  • PDF