• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.175.3-175
• /
• 2001

A control system for crop cutting in Hot strip Mill is developed. The development system is composed of three sub-systems. one is crop shape system which captures the shapes of the strip's head and tail using the area CCD camera. Another is Laser Speed System which measures the speed and length of strip. and, the other is control system which controls the optimal cutting length and crop shear motor. As a result, with a developed system we can reduce crop loss considerably.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.101-108
• /
• 2004

It is very important to diagnose state of knife and strip cutting face in real time in the side trimming process due to improvement of quality of trimming face. In this study, diagnosis system for knife and strip cutting face was developed. CCD camera was installed at the both side of strip in the entry of burr masher roll. This system offer to operator the diagnosis result that was analyzed image obtained from CCD camera. As a result, bad quality of trimming face is decreased below 1/10 and knife breakage is detected $100\%$.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1075-1083
• /
• 2014

The objective of this study was to evaluate the effect of cutting types on microclimate and growth characteristics of afforested tree in Quercus acutissima stand after different types of cutting. The difference in temperature reaching $5.2^{\circ}C$ was shown in between clear cutting and selective cutting treatments. On July and August days with temperatures more than $35^{\circ}C$ often appeared in clear cutting stand. The values of VPD in July and August were higher than those in other months. Maximum VPD of 3.99 kPa was shown in clear cutting stand on May 23 as a prolonged rainless days appeared. However, VPD in selective cutting stand always stayed under 3.0 kPa throughout growing season. A higher intensity was shown in clear cutting and strip clear cutting stands, reaching to more than $1,600{\mu}mol\;m^{-2}s^{-1}$ at midday on early August, while that in selective cutting stand stayed about 1,500. In relative growth rate selective cutting stand showed a significantly higher relative growth rate in plant height than those in other cutting stands (p<0.05). The number of leaf in current-year branches significantly increased in selective cutting stand, whereas no increase was shown in clear cutting and strip clear cutting stands (p<0.05). In addition, relative elongation rate of current year branch also showed higher values in selective cutting stand compared with that in strip clear cutting stand (p<0.05). However, leaf mass per unit area (LMA) was higher in order of strip clear cutting, clear cutting, and selective cutting stands. From these results it is concluded that environmental conditions in clear cutting and strip clear cutting stands during growing season are more stressful to afforested tree species, resulting in lower relative growth in plant height, elongation of current-year branches, and leaf number per branch compared with those in selective cutting stand. Consequently, more data must be accumulated in the field to find out best cutting type in plantation considering the adaptational characteristic of each tree species varies with species and life span of tree is long.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.331-339
• /
• 2023

This study was conducted to identify seed inflow characteristics according to harvest typeand to provide basic data for developing a regeneration technology for secondary growth forests in Korean red pine (Pinus densiflora) succession forest formation by natural regeneration. Experimental sites were established by applying seed tree (single and group) and clear-cutting methods (10- 20- 30-m strip and 20- 30- 40-m patch). The seed inflow characteristics of the natural regeneration site were analyzed for 6 years from 2014. Most seeds were flowed to the regeneration stand from October to November. In years with good seed fructification, more than 80% were flowed in October. The average annual seed inflow by harvest type was highest in the seed tree area (296,000 seeds/ha/yr), followed by the 20-m patch clear-cutting area (291,000 seeds/ha/yr) and 10-m strip clear-cutting area (281,000 seeds/ha/yr). The distribution uniformity of seed inflow according to treatment was analyzed in the order of the 20-m strip clear-cutting area (52.2), 20-m patch clear-cutting area (52.9), and 10-m strip clear-cutting area (56.1). As a result, the 10-m strip and 20-m patch clear-cutting areas with relatively small harvest areas showed high seed inflow and distribution uniformity.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.2
• /
• pp.127-131
• /
• 2004

A low-cost, simple strip reader system using a linear movement mechanism of CD-ROM deck has been developed to characterize a lateral flow membrane-based immunochromatographic assay. The test strip reader was assembled by a CD-ROM deck and home-made optical head especially designed for immunoassays. The optical head for detecting reflected light from the test strip surface consists of green light-emitting diode, large area silicon photodiode, and anodized aluminum mounting block providing a slit structure for cutting light from the LED. The stepping motor of the deck was operated in the full step mode, whose distance of each reading point is about 0.15mm. The performance of the strip reader was tested by analysis of HBV(hepatitis B virus) antigen test kit. This strip reader can be useful for inexpensive, disposable, and membrane-based assays that provide visual evidence of the presence of an analyte in a liquid sample.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.155-156
• /
• 2007

This paper presents the vision-based camber and optimal cutting line detection algorithm for hot-rolling process. It is important to measure the camber of head and tail part of strips because many problems are caused by the camber in the hot-rolling process. The hot-rolling process has time constraints. The camber detection algorithm of head and tail parts requires fast and less complex for satisfying time constraints. The proposed algorithm consists of two parts: measurement of the camber in the head and tail part of strips and decision part of the optimal cutting line of hot-rolled strip. First, we obtain the camber value of the strip from the difference between the real center line and the center line of head, tail part. Second, the head and tail part of strips isn't suitable for strips connections. Therefore, the cutting process is needed in the hot-rolling process. The optimal cutting line is determined by the head and tail images obtained from cameras. The algorithm is applied into the vision system with two area cameras, Matrox image processing board and host PC for verification.

• Journal of the Korean Society of Costume
• /
• v.52 no.3
• /
• pp.149-160
• /
• 2002

Symbolism found in a certain object inherits characteristics from the culture that contains the objects. The purpose of this study was investigate the formative beauty of Korean trousers twisted the pieces together based on the way of Korean thinks and the Topology. The shape is formed by cutting from the fabric. From the perspective of semiology, the fabric and the pattern shape correspond to ground and figure. Ground and figure are identical with the principle of the whole and the part, which is the same in Korea, China, and the West. But In Korea, the 3-dimensional garment is made by adding a twist. This is very important and defines the difference in the way of thinking and topology. Korean trousers consist of three parts : Hury, Marupok, and Sapok. The small Sapok can be made by removing the Marupok and large Sapok (figure) from the fabric (ground) when making Korean trousers. A Mobius strip is made when the large Sapok is adjoined with the small Sapok by reversing the small Sapok, making a 180$^{\circ}$twist and then stitching together. The theory of Mobius strip can be applied in Joining Bajiburi. thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strop. The theory of Mobius strip can be applied in Joining Bajiburi, thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strip. Hury is cylinder while the small and large Sapok make up the Mobius strip. As a result, Mobius strip, Kleins'bottle, protective plan can be applied in cutting Hanbok used in the countryside, so I have come to see that the traditional Korean way of thinking is closely related to the theory of topological.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.116-120
• /
• 2020

In this paper, we developed an electrochemical glucose sensor strip using a paper substrate. The paper glucose sensor strip is eco-friendly because it uses paper as a substrate, and it has the advantage that it can be manufactured only with four printing, drying and cutting processes. The paper glucose sensor is significantly simplified by the production process than the conventional glucose sensors because the production of only four printing on the paper substrate. In this paper, eco-friendly tracing paper was used to develop a paper glucose sensor strip, and screen-printing technology was used to form a carbon/silver electrode, insulating layer and glucose oxidase(GOD) layer. The developed paper glucose sensor strip has a flat structure with a size of 30 × 4.6 ㎟, and blood injection is a type of direct contact with the exposed enzyme layer above the strip. In this paper, the performance of paper glucose sensor strips was evaluated by analyzing the cyclic voltammetry(CV) and chronoamperometry(CA) characteristics.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.785-790
• /
• 2015

As an alternative to large-scale clear cutting silviculture, strip clear cutting (SC) is being considered as a system compatible with ecological conservation and forest regeneration. In South Korea, application and effectiveness of SCC in varying forest types were rarely found. In this study, under the subject of strip clear cutting lands of pinus densiflora forest at Samcheok, Gangwon-do Province, the developmental aspect of low vegetation prior to and after deforestation and the correlation between environmental factor and pine regeneration were analyzed. The cover rate of understory vegetation was appeared to be increased after deforestation and rapidly increased two years after deforestation, and it was evaluated to be affected by vigorous tree species and photophilic species. From the perspective of relative importance value, Quercus mongolica, Artemisia keiskeana, and Rubus crataegifolius that influence the cover rate showed the inclination of continuous growth. The diversity of species showed increment inclination as well due to introduction and settlement of early transient species. As a result of analyzing the correlation between vegetation and environmental factor and generation of pine tree size, the soil exposure rate, intensity of light, and canopy openness showed positive relationship, and the understory vegetation cover and woody debris cover rate showed negative relationship.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.29-34
• /
• 2006

In this paper, the mechanical characteristics of ultrasonic cold forged technology (UCFT) used for the trimming knife and the effects of ultrasonic vibration energy (UVE) into the trimming process on the state of the strip cutting face were studied. And a diagnosis system to quality control for trimming knife and strip cutting face was developed and installed in plant. By the plant application of UCFT, service life of knife was more increased over 100% than that of conventional knife. And using the developed diagnosis system, the knife breakage and saw ear have been perfectly detected and quality control of trimming face is obtained effectively.