Journal of the Semiconductor & Display Technology (반도체디스플레이기술학회지)

The Korean Society Of Semiconductor & Display Technology (한국반도체디스플레이기술학회)
권호 표지

Development of Eco-friendly Paper Glucose Sensor Using Printing Technology

인쇄 기술을 이용한 친환경 종이 혈당 센서 스트립 개발

  • Lee, Young Tae (Dept. of Electronic Engineering Education, Andong National University)
  • 이영태 (안동대학교 전자공학교육과)
  • Received : 2020.12.16
  • Accepted : 2020.12.18
  • Published : 2020.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, we developed an electrochemical glucose sensor strip using a paper substrate. The paper glucose sensor strip is eco-friendly because it uses paper as a substrate, and it has the advantage that it can be manufactured only with four printing, drying and cutting processes. The paper glucose sensor is significantly simplified by the production process than the conventional glucose sensors because the production of only four printing on the paper substrate. In this paper, eco-friendly tracing paper was used to develop a paper glucose sensor strip, and screen-printing technology was used to form a carbon/silver electrode, insulating layer and glucose oxidase(GOD) layer. The developed paper glucose sensor strip has a flat structure with a size of 30 × 4.6 ㎟, and blood injection is a type of direct contact with the exposed enzyme layer above the strip. In this paper, the performance of paper glucose sensor strips was evaluated by analyzing the cyclic voltammetry(CV) and chronoamperometry(CA) characteristics.

Keywords

References

  1. R. K. Kobos, "Enzyme-base electrochemical biosensors," TrAC Trends in Analytical Chmistry, Vol.6, Issue 1, pp.6-9, 1987. https://doi.org/10.1016/0165-9936(87)85012-4
  2. H. J. Chun, Y. M. Park, Y. D. Han, Y. H. Jang, and H. C. Yoo, "Paper-based glucose biosensing system utilizing a smartphone as a signal reader," BioChip Jourmal, Vol.8, pp.218-226, 2014. https://doi.org/10.1007/s13206-014-8308-7
  3. J. W. Kye, and Y. T. Lee, "Development of single-layer glucose sensor using GDH-FAD," Journal of Sensor Science and Technology, Vol.27, No.3, pp. 156-159, 2018. https://doi.org/10.5369/JSST.2018.27.3.156
  4. A. Maattanen, U. Vanamo, P. Ihalainen, P. Pulkkinen, H. Tenhu, J. Bobacka, and J. Peltonen, "A low-cost paper-based inkjet-printed platform for electrochemical analysis," Sensors and Actuators B: Chemical, Vol.177, pp.153-162, 2013. https://doi.org/10.1016/j.snb.2012.10.113
  5. A Y. Kim, and Y. T. Lee, "Development of eco-friendly paper glucose sensor," Journal of Sensor Science and Technology, Vol.22, No.3, pp. 202-206, 2013. https://doi.org/10.5369/JSST.2013.22.3.202
  6. S. R. Lee, and Y. T. Lee, "Chemical and Biosensors; Development of the disposable glucose sensor using Cu/Ni/Au," Journal of Sensor Science and Technology, Vol.15, No.5, pp. 352-356, 2006. https://doi.org/10.5369/JSST.2006.15.5.352
  7. J. S. Woo, and Y. T. Lee, "Development of a strain gauge for sensing large strain," Journal of the Semiconductor & Display Technology, Vol.13, No.4, pp.33-36, 2014.