• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.175.3-175
• /
• 2001

A control system for crop cutting in Hot strip Mill is developed. The development system is composed of three sub-systems. one is crop shape system which captures the shapes of the strip's head and tail using the area CCD camera. Another is Laser Speed System which measures the speed and length of strip. and, the other is control system which controls the optimal cutting length and crop shear motor. As a result, with a developed system we can reduce crop loss considerably.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.101-108
• /
• 2004

It is very important to diagnose state of knife and strip cutting face in real time in the side trimming process due to improvement of quality of trimming face. In this study, diagnosis system for knife and strip cutting face was developed. CCD camera was installed at the both side of strip in the entry of burr masher roll. This system offer to operator the diagnosis result that was analyzed image obtained from CCD camera. As a result, bad quality of trimming face is decreased below 1/10 and knife breakage is detected $100\%$.

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1075-1083
• /
• 2014

The objective of this study was to evaluate the effect of cutting types on microclimate and growth characteristics of afforested tree in Quercus acutissima stand after different types of cutting. The difference in temperature reaching $5.2^{\circ}C$ was shown in between clear cutting and selective cutting treatments. On July and August days with temperatures more than $35^{\circ}C$ often appeared in clear cutting stand. The values of VPD in July and August were higher than those in other months. Maximum VPD of 3.99 kPa was shown in clear cutting stand on May 23 as a prolonged rainless days appeared. However, VPD in selective cutting stand always stayed under 3.0 kPa throughout growing season. A higher intensity was shown in clear cutting and strip clear cutting stands, reaching to more than $1,600{\mu}mol\;m^{-2}s^{-1}$ at midday on early August, while that in selective cutting stand stayed about 1,500. In relative growth rate selective cutting stand showed a significantly higher relative growth rate in plant height than those in other cutting stands (p<0.05). The number of leaf in current-year branches significantly increased in selective cutting stand, whereas no increase was shown in clear cutting and strip clear cutting stands (p<0.05). In addition, relative elongation rate of current year branch also showed higher values in selective cutting stand compared with that in strip clear cutting stand (p<0.05). However, leaf mass per unit area (LMA) was higher in order of strip clear cutting, clear cutting, and selective cutting stands. From these results it is concluded that environmental conditions in clear cutting and strip clear cutting stands during growing season are more stressful to afforested tree species, resulting in lower relative growth in plant height, elongation of current-year branches, and leaf number per branch compared with those in selective cutting stand. Consequently, more data must be accumulated in the field to find out best cutting type in plantation considering the adaptational characteristic of each tree species varies with species and life span of tree is long.

• 한국산림과학회지
• /
• 제112권3호
• /
• pp.331-339
• /
• 2023

본 연구는 목재수확 유형에 따른 종자 유입 특성을 구명하여 천연갱신에 의한 소나무 후계림 조성 기술의 기초자료를 제공하고자 수행되었다. 이를 위해 모수작업(단목모수, 군상모수) 및 개벌작업(대상개벌 10 mㆍ20 mㆍ40 m, 군상개 벌 20 mㆍ30 mㆍ40 m)을 실시하여 시험지를 조성하고, 2014년부터 6년간 천연갱신지의 종자 유입 특성을 분석하였다. 소나무 종자는 대부분 10~11월 갱신상에 유입되었으며, 종자 결실이 좋은 해에는 80% 이상이 10월에 유입되었다. 목재수확 유형별 연평균 종자 유입량은 군상 모수작업지(296천립/ha/yr), 20 m 군상 개벌작업지(291천립/ha/yr), 10 m 대상 개벌 작업지(281천립/ha/yr) 순으로 많았다. 유입 종자 분포 균일성은 20 m 대상 개벌작업지(52.2), 20 m 군상 개벌작업지(52.9), 10 m 대상 개벌작업지(56.1) 순으로 분석되어 벌채 면적이 상대적으로 좁은 10 m 대상 개벌작업지와 20 m 군상 개벌작업지가 종자 유입량 및 분포 균일성이 높은 것으로 나타났다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권2호
• /
• pp.127-131
• /
• 2004

A low-cost, simple strip reader system using a linear movement mechanism of CD-ROM deck has been developed to characterize a lateral flow membrane-based immunochromatographic assay. The test strip reader was assembled by a CD-ROM deck and home-made optical head especially designed for immunoassays. The optical head for detecting reflected light from the test strip surface consists of green light-emitting diode, large area silicon photodiode, and anodized aluminum mounting block providing a slit structure for cutting light from the LED. The stepping motor of the deck was operated in the full step mode, whose distance of each reading point is about 0.15mm. The performance of the strip reader was tested by analysis of HBV(hepatitis B virus) antigen test kit. This strip reader can be useful for inexpensive, disposable, and membrane-based assays that provide visual evidence of the presence of an analyte in a liquid sample.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.155-156
• /
• 2007

This paper presents the vision-based camber and optimal cutting line detection algorithm for hot-rolling process. It is important to measure the camber of head and tail part of strips because many problems are caused by the camber in the hot-rolling process. The hot-rolling process has time constraints. The camber detection algorithm of head and tail parts requires fast and less complex for satisfying time constraints. The proposed algorithm consists of two parts: measurement of the camber in the head and tail part of strips and decision part of the optimal cutting line of hot-rolled strip. First, we obtain the camber value of the strip from the difference between the real center line and the center line of head, tail part. Second, the head and tail part of strips isn't suitable for strips connections. Therefore, the cutting process is needed in the hot-rolling process. The optimal cutting line is determined by the head and tail images obtained from cameras. The algorithm is applied into the vision system with two area cameras, Matrox image processing board and host PC for verification.

• 복식
• /
• 제52권3호
• /
• pp.149-160
• /
• 2002

Symbolism found in a certain object inherits characteristics from the culture that contains the objects. The purpose of this study was investigate the formative beauty of Korean trousers twisted the pieces together based on the way of Korean thinks and the Topology. The shape is formed by cutting from the fabric. From the perspective of semiology, the fabric and the pattern shape correspond to ground and figure. Ground and figure are identical with the principle of the whole and the part, which is the same in Korea, China, and the West. But In Korea, the 3-dimensional garment is made by adding a twist. This is very important and defines the difference in the way of thinking and topology. Korean trousers consist of three parts : Hury, Marupok, and Sapok. The small Sapok can be made by removing the Marupok and large Sapok (figure) from the fabric (ground) when making Korean trousers. A Mobius strip is made when the large Sapok is adjoined with the small Sapok by reversing the small Sapok, making a 180$^{\circ}$twist and then stitching together. The theory of Mobius strip can be applied in Joining Bajiburi. thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strop. The theory of Mobius strip can be applied in Joining Bajiburi, thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strip. Hury is cylinder while the small and large Sapok make up the Mobius strip. As a result, Mobius strip, Kleins'bottle, protective plan can be applied in cutting Hanbok used in the countryside, so I have come to see that the traditional Korean way of thinking is closely related to the theory of topological.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.116-120
• /
• 2020

In this paper, we developed an electrochemical glucose sensor strip using a paper substrate. The paper glucose sensor strip is eco-friendly because it uses paper as a substrate, and it has the advantage that it can be manufactured only with four printing, drying and cutting processes. The paper glucose sensor is significantly simplified by the production process than the conventional glucose sensors because the production of only four printing on the paper substrate. In this paper, eco-friendly tracing paper was used to develop a paper glucose sensor strip, and screen-printing technology was used to form a carbon/silver electrode, insulating layer and glucose oxidase(GOD) layer. The developed paper glucose sensor strip has a flat structure with a size of 30 × 4.6 ㎟, and blood injection is a type of direct contact with the exposed enzyme layer above the strip. In this paper, the performance of paper glucose sensor strips was evaluated by analyzing the cyclic voltammetry(CV) and chronoamperometry(CA) characteristics.

• 한국환경생태학회지
• /
• 제29권5호
• /
• pp.785-790
• /
• 2015

대면적 개벌의 대안으로서, 대상 개벌은 생산림지의 생태 조건 보전과 임분 재생을 모두 고려하는 작업법이다. 그러나 우리나라에서는 대상 벌채 기법의 적용 및 효율성에 대한 연구를 찾아보기 어렵다. 본 연구는 강원도 삼척에서 2012년부터 2014년까지 소나무림 대상 벌채 (10m, 20m 및 40m) 처리 전 후의 하층식생 반응 및 소나무 재생과 임분 환경 변화와의 상관성을 방형구법을 적용하여 조사 및 분석하였다. 하층식생 피도 및 종다양성은 대상 벌채 넓이에 상관없이 교목 종 및 광선호 종의 확장에 의해 증가하는 경향이었고, 신갈나무, 맑은대쑥 및 산딸기 등의 벌채 후 잔존 교목 및 광선호 종들의 활발한 증가가 관찰되었다. 대상 벌채 구역의 소나무 정착은 수관층 환경 (광량 및 수관열림도) 및 토양나출도와는 정의 상관, 그리고 하층식생 및 임상 목질잔해물의 피도와는 음의 상관을 나타내었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.29-34
• /
• 2006

In this paper, the mechanical characteristics of ultrasonic cold forged technology (UCFT) used for the trimming knife and the effects of ultrasonic vibration energy (UVE) into the trimming process on the state of the strip cutting face were studied. And a diagnosis system to quality control for trimming knife and strip cutting face was developed and installed in plant. By the plant application of UCFT, service life of knife was more increased over 100% than that of conventional knife. And using the developed diagnosis system, the knife breakage and saw ear have been perfectly detected and quality control of trimming face is obtained effectively.