• 복식
• /
• 제52권3호
• /
• pp.149-160
• /
• 2002

Symbolism found in a certain object inherits characteristics from the culture that contains the objects. The purpose of this study was investigate the formative beauty of Korean trousers twisted the pieces together based on the way of Korean thinks and the Topology. The shape is formed by cutting from the fabric. From the perspective of semiology, the fabric and the pattern shape correspond to ground and figure. Ground and figure are identical with the principle of the whole and the part, which is the same in Korea, China, and the West. But In Korea, the 3-dimensional garment is made by adding a twist. This is very important and defines the difference in the way of thinking and topology. Korean trousers consist of three parts : Hury, Marupok, and Sapok. The small Sapok can be made by removing the Marupok and large Sapok (figure) from the fabric (ground) when making Korean trousers. A Mobius strip is made when the large Sapok is adjoined with the small Sapok by reversing the small Sapok, making a 180$^{\circ}$twist and then stitching together. The theory of Mobius strip can be applied in Joining Bajiburi. thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strop. The theory of Mobius strip can be applied in Joining Bajiburi, thus when the trousers are completed the Klein's bottle is seen because of the 2 existing Mobius strip. Hury is cylinder while the small and large Sapok make up the Mobius strip. As a result, Mobius strip, Kleins'bottle, protective plan can be applied in cutting Hanbok used in the countryside, so I have come to see that the traditional Korean way of thinking is closely related to the theory of topological.

• 동국한의학연구소논문집
• /
• 제4권
• /
• pp.267-311
• /
• 1995

This study was performed to analyze the effects of WhoaDam-JiHae PyeongChunYak on contracted tracheal smooth muscle in rat. Transverse strips were used for the experiment using organ bath. The test strip was perfused with modified Krebs-Ringer Bicarbonate solution which was aerated with 95% $O_2$-5% $CO_2$ mixed gas and kept at $37^{\circ}C$. WhoaDam-JiHae PyeongChunYak extract and acetylcholine infused tracheal strip that was contracted with acetylcholine. The results were as follows : 1. The contractile force of tracheal strip by acetylcholine was significantly increased by Pinelliae Rhizoma, Arisaematis Rhizoma, Sinapis Semen. Typhonii Rhizoma, Peucedani Radix, Eriobotryae Folium, Platycodi Radix, Bambusae Caulis Taeniam, Benincasae Semen, Armeniacae Amarum Semen, Asteris Radix, Periliae Fructus, Mori cortex and Lepidii Semen. 2. Arisaematis Rhizoma($1{\mu}{\ell}/m{\ell}$, $3{\mu}{\ell}/m{\ell}$, $10{\mu}{\ell}/m{\ell}$) and Asteris Radix($1{\mu}{\ell}/m{\ell}$, $3{\mu}{\ell}/m{\ell}$) slightly relaxed the contracted tracheal strip by acetylcholine. 3. Farfarae Flos significantly relaxed the contracted tracheal strip by acetylcholine. 4. The contractile force of tracheal strip by acetylcholine was significantly increased by Stemonae Radix at $30{\mu}{\ell}/m{\ell}$, on the other hand Stemonae Radix at $100{\mu}{\ell}/m{\ell}$ significantly relaxed the contracted tracheal strip by acetylcholine.

• 한국생산제조학회지
• /
• 제19권3호
• /
• pp.353-358
• /
• 2010

This research introduces a new and improved design for a pneumatic cylinder driven roll feeder wherein each of the principal rotating feeder parts is configured so as to have feeding accuracy and to be low manufacturing cost. The feed pitch accuracy of the proposed roll feeder was evaluated by measuring lengths of cut offs of the strip stock with a shear attached to an air press. The air press was designed, manufactured, and mounted on the same table of the proposed roll feeder such that the strip stock maintained horizontal plane until the strip stock entered into the shear. The proposed roll feeder and the air press were designed to be operated automatically by a PLC employed controller. The feed pitch accuracy of the proposed roll feeder was analyzed by setting the pitch as 10, 12.5, and 15mm. At each predetermined feed pitch, the proposed roll feeder was tested 300 times as one test set and replicated three times. The average lengths of the cut offs of the strip stock ranged from 9.98 to 10.13mm, from 12.42 to 12.57mm, and from 14.96 to 15.06mm at the predetermined 10, 12.5, and 15mm feed pitch, respectively, among the total of 900 samples of each feed pitch. Main cause of variation of the length of the cut off of the strip stock fed by the proposed roll feeder was considered to be fluctuation of the air press during recompressing period of the air compressor to pressurize the air in the air tank. The largest difference between the maximum and the minimum length of the cut off was appeared while the air compressor recompressing the air. The air compressor used for this study restricted the air delivered to the proposed roll feeder while it was still running. Thus, this air delivery restriction problem should be improved by stabilizing the air press while the proposed roll feeder is running.

• 한국인터넷방송통신학회논문지
• /
• 제21권1호
• /
• pp.49-54
• /
• 2021

본 논문에서는 2중 유전체층 사이의 저항띠 격자구조에 의한 E-분극 전자파 산란 문제는 전자파 수치해석방법으로 알려진 PMM(Point Matching method)를 이용하여 해석하였다. 경계조건들은 미지의 계수를 구하기 위하여 이용하였고, 저항띠의 해석을 위해 저항띠 경계조건을 적용하였다. 2중 유전층 사이의 비유전율과 두께 및 저항띠의 저항율에 대해 정규화된 반사전력과 투과전력을 계산하였다. 전반적으로 저항띠의 저항율이 작아지거나 유전체 층의 비유전율이 증가할수록 반사전력은 증가하였으며, 반사전력이 증가하면 투과전력은 상대적으로 감소하였다. 특히, 2중 유전체 층의 비유전율이 증가할수록 반사전력의 변곡점의 최소 값은 격자주기가 작아지는 방향으로 이동하였다. 본 논문의 제안된 구조에 대한 수치결과들은 기존논문의 수치해석 결과들과 비교하여 매우 잘 일치하였다.

• 대한금속재료학회지
• /
• 제47권8호
• /
• pp.474-481
• /
• 2009

The effects of final heat treatment on the mechanical and corrosion properties of a Zr alloy strip incorporating Nb were investigated. The chemical composition of the strip was Zr-1.49Nb-0.38Sn-0.20Fe-0.11Cr, and strip specimens were subjected to final heat treatment in a temperature range of $580{\sim}700^{\circ}C$. Tensile tests at room temperature and $316^{\circ}C$, along with corrosion tests in a simulated PWR loop and a 70 ppm LiOH solution environment at $360^{\circ}C$, were performed on the specimens. The mechanical properties of the strip were saturated when the specimens received final heat treatment at an elevated temperature of more than $640^{\circ}C$. However, the corrosion resistance of the strip in the simulated PWR loop and in the 70 ppm LiOH solution environment was improved with a decrease of the final annealing temperature. It is recommended that the alloy strip be finally heat-treated at a temperature of less than $620^{\circ}C$ for longer than 10 minutes in order to obtain fully recrystallized microstructures, and thereby attain enlarged tensile elongation, and to prevent the precipitation of ${\beta}-Zr$, which is known to deteriorate the corrosion resistance.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 토목섬유(Geosymthetics) 학술발표회 논문집
• /
• pp.29-42
• /
• 1996

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 추계학술발표 개요집
• /
• pp.129-132
• /
• 1996

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.379-380
• /
• 2000

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.773-774
• /
• 2010

• 한국지반신소재학회논문집
• /
• 제12권4호
• /
• pp.77-86
• /
• 2013

본 연구에서는 지지부재가 설치된 띠형 강보강재에 대한 실내인발시험을 수행하였다. 주문진 표준사를 사용하여 상대밀도 80%인 모형지반을 조성하였고, 지지부재의 개수를 0~2개로 구분하여 실내인발시험을 수행하였다. 상재압은 $50kN/m^2{\sim}200kN/m^2$까지 4단계로 구분하여 적용하였고, 1mm/min 속도로 강보강재를 인발하였다. 표면이 매끄러운 띠형 강보강재의 인발저항력은 보강재 표면과 지반 사이에서 마찰저항만 발현되기 때문에 인발 초기에 급격히 증가하다가 지속적으로 감소하는 경향을 나타낸다. 반면, 지지부재를 설치한 강보강재의 인발저항력은 마찰저항뿐만 아니라 수동저항도 함께 발현되므로 계속적으로 증가하는 것으로 나타났다. 보강재의 형태에 관계없이 최대인발저항은 상재압이 증가함에 따라 선형적으로 증가하는 것으로 나타났다. 지지부재를 1개 설치한 경우에 비해 지지부재를 2개 설치했을 때의 최대수동저항은 작게 나타났다. 이는 지지부재의 설치 간격 및 위치에 따라 지지부재에서 발현되는 수동저항의 크기가 다르기 때문에 나타나는 현상으로 판단되며, 지지부재 설치 위치 및 간격에 따른 추가 인발시험을 통해 확인할 필요가 있다.