• Geomechanics and Engineering
• /
• 제33권5호
• /
• pp.477-486
• /
• 2023

In the studies on fault dislocation of tunnel, existing literatures are mainly focused on the problems caused by normal and reverse faults, but few on strike-slip faults. The paper aims to research the deformation and failure mechanism of a tunnel under strike-slip faulting based on a model test and test-calibrated numerical simulation. A potential faulting hazard condition is considered for a real water tunnel in central Yunnan, China. Based on the faulting hazard to tunnel, laboratory model tests were conducted with a test apparatus that specially designed for strike-slip faults. Then, to verify the results obtained from the model test, a finite element model was built. By comparison, the numerical results agree with tested ones well. The results indicated that most of the shear deformation and damage would appear within fault fracture zone. The tunnel exhibited a horizontal S-shaped deformation profile under strike-slip faulting. The side walls of the tunnel mainly experience tension and compression strain state, while the roof and floor of the tunnel would be in a shear state. Circular cracks on tunnel near fault fracture zone were more significant owing to shear effects of strike-slip faulting, while the longitudinal cracks occurred at the hanging wall.

• Economic and Environmental Geology
• /
• 제31권6호
• /
• pp.547-555
• /
• 1998

A new trigonometrical method for calculating total slip (T) of faulting is presented. The parameters for the calculations are used rake of fault striation, strike and dip of fault and of index planar structure such as bedding plane. The faults are groupped into three types. The direction of plunging of fault striation is out of a range ${\pm}90^{\circ}$ to the bedding dip direction in $360^{\circ}$ system, which is groupped into the type I. Meanwhile, the case of the direction lies in the above range can be separated into two different types, type II and type III, according to relative largeness of the angles rake of fault striation and i (see text). The type II has smaller rake than angle i and the type III has larger rake than angle i. Here I propose a few equations for calculating not only total slip (T) but strike slip (L) or dip slip (S) of the faulting. The equations are adapted selectively to the types of fault mentioned before. The limitation of the method is that the equations do not fit to polyphase faulting.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 한국지진공학회 1999년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall
• /
• pp.58-63
• /
• 1999

In and around the Korean Peninsula 22 intraplate earthquake mechanisms since 1936 were analyzed to understand the regional stress orientation and tectonics. These 22 earthquakes are largest ones in this century and may represent the characteristics of earthquake in the region. Focal mechanism of earthquakes in the region show predominant strike-slip faulting with small amount of thrust components. The average P-axis is almost horizontal ENE- WSW. Studied data are compared with neighboring intraplate region in order to understand the tectonic regime in far est Asia. In northeastern China strike-slip faulting is dominant and nearly horizontal average P-axis in ENE- WSW is very similar with the Korean Peninsula. On the other hand in the eastern part of East Sea thrust faulting is dominant and average P-axis is horizontal with ESE- WSW This indicate that not only the subducting Pacific Plate in east but also the indenting Indian Plate controls earthquake mechanism in the far east of the Eurasian Plate.

• Journal of the Earthquake Engineering Society of Korea
• /
• 제18권5호
• /
• pp.213-219
• /
• 2014

The source parameters of four earthquakes with magnitude larger than 4.0 nearby the offshore Sinan are analyzed. The waveform inversion method is used for analyzing the source parameters of two events (20 August 2012 and 21 April 2013) with C&B and AK135-c crustal velocity structure models. The source parameters of the other two events (26 July 1994 and 23 March 2003) are obtained from references. Focal mechanisms of the events are strike slip faulting or strike slip faulting with a thrust component. The directions of P-axes of the events are ENE-WSW or NE-SW which are similar to previous studies on P-axes in and around the Korean peninsula. With regard to the events nearby the offshore Sinan, the regional stress, rather than being local stress, is seen to be the result of the combination of tectonic forces from the compression of plates colliding to the Eurasian Plate.

• Economic and Environmental Geology
• /
• 제30권2호
• /
• pp.143-151
• /
• 1997

The history of the Palgongsan Fault comprises the growth-fault, the dormant and the strike-slip phases. Dissecting the Palgongsan Granite, the Palgongsan Strike-slip Fault, which is the product of the final phase, sinistrally offset about 5.5 km as shown in the dislocation of the Hasandong Formation. Faulting, sedimentation and igneous activity were inter-related in the early phases of the Palgongsan Fault. Some other faults such as the Dansan Pond Fault and the Hayang Fault have also been discovered, and their some stratigraphic implications and the ages of faulting are discussed. The anomalous development of the Jindong Formation in the study area and the related stratigraphic problems are discussed. It has been confirmed that the Konchonri Formation deposited over the Chaeyaksan Volcanic Formation in spite of the recent doubts on their such stratigraphic relation. The chronological sequence of the volcanisms of the Kyongsang Basin has been summarized.

• Journal of the Korean earth science society
• /
• 제29권5호
• /
• pp.437-445
• /
• 2008

We analyzed fault plane solutions of the recent twenty-two earthquakes which occurred from 2004 to 2006 in the central part of the Korean Peninsula by using P- and S-wave polarities along with SH/P amplitude ratios. The fault plane solution shows that strike-slip fault is dominant here, especially for the events with local magnitude equal to or greater than 3.0. However, some events with local magnitude less than 3.0 show normal fault or strike-slip fault with normal components. In the case of strike-slip fault, its orientation is almost in the direction of NNE-SSW to NE-SW almost parallel to the general trend of faults, while the compressional axis of the stress field trends ENE to E-W. The result is almost consistent with the stress field in and around the Korean peninsula, as reported previously. We cannot give any appropriate explanations to the normal faulting events along the western offshore and inland areas whether it is related to the local stress changes or tectonically unidentified extensional structures. Thus, an extension of investigations is desirable to clarify the cause of such phenomena.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.228-234
• /
• 1998

To interpret the relationship between movement of the Yangsan fault and tectonics around the Korean peninsula, the six sequential paleostresses were reconstructed from 1, 033 striated small faults which were measured at 37 outcrops along the strike of the Yangsan fault. And, the relationship between these paleostresses of the Yangsan fault and the tectonic events around the Korean peninsula were compared. As compared with the tectonic history around the Korean peninsula, the movement of the Yangsan fault is interpreted as follows; The initial feature of the Yangsan fault was formed with the development of extension fractures by the NW-SE extension. The fault experienced a right-lateral strike-slip movement continuously. The movements had been continued until the Late Miocene age, which was the most active period in faulting. The left-lateral strike-slip movement was followed by subsequent tectonic events. In the last stage, the fault acted with a slight extension or right-lateral movement.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.49-56
• /
• 1997

Most large strike-slip faults do not rupture their entire length during single faulting but generally break in segments which are different in location and time of faulting. Studies related to the development of the Yangsan fault have been reported based on partial results from characteristics of geolgocial distribution, geophysical prospecting and paleostress analyses. This paper shows, based on preliminary results, that the Yangsan fault could be divided into four structural areas along entire length. These areas are different in geological distribution, bedding attitude measured from sedimentary rocks, strike of main fault, geometry of small faults, termination types of fault tips, cyclic variation of fault zone width, and arrangement of paleostress. Therefore, the Yangsan fault could be divided into at least four segments.

• Korean Journal of Mineralogy and Petrology
• /
• 제33권4호
• /
• pp.349-359
• /
• 2020

The Ulsan Fault Zone (UFZ) of NNW trend is developed in the Gyeongsang Basin, the southeastern part of the Korean Peninsula, and the Quaternary faults have been found around the UFZ. The faults generally thrust the Bulguksa igneous rocks of Late Cretaceous-Early Tertiary upon the Quaternary deposits or are developed within the Quaternary deposits. They mainly show the reverse-slip sense of top-to-the west movement. The lines connecting the their outcrop sites show a zigzag-form which is similar to the orientation of their fault surfaces which show the various trends, like (W)NW, N-S, (E)NE, ENE trends. The E-W trending dextral strike(-slip) fault is found in the Quaternary deposits of the Singye-ri valley. It cuts the N-S trending reverse fault and are cut by the N-S trending thrust fault again. Two types of at least two times of Quaternary tectonic movements related to the formation of neotectonic fault zone in the Singye-ri valley are considered from such the geometric and kinematic characteristics of Quaternary faults. One is the reverse faulting of N-S trend by the E-W directed 1st compression and associated the strike-slip tear faulting of E-W trend, and then the thrust faulting of N-S trend by the E-W directed 2nd compression. The other is the reverse faulting of N-S trend, and then the dextral strike-slip faulting of E-W trend by the NW-SE directed compression, and then the thrust faulting of N-S trend. In this paper is suggested the development history of Singye-ri neotectonic fault zone on the basis of the various orientations of Quaternary fault surfaces around the UFZ, and the zigzag-form connecting line of their outcrop sites, and the compressive arc-shaped lineaments which convex to the west reported recently in the Yangsan Fault Zone.

• The Journal of Engineering Geology
• /
• 제10권2호
• /
• pp.98-112
• /
• 2000

Discrimination between natural earthquakes and man-made explosions is very essential but critical matter in Seismology. In the CTBT Monitoring business, this is very crucial issue and sometimes could occur the international conflict. In this study, we analyzed seismic and infrasound data from Chulwon Seismo-Acoustic Array and would like to introduce routine data processing procedures at the Korea Institute of Geology, Mining and Materials(KIGAM) to discriminate the earthquakes and artificial explosions. We found analyzing acoustic data together with seismic data is very effective way to identify and discriminate man made explosion from natural earthquake. Recent earthquakes in and around the Korean Peninsula are concentrated in a narrow zone with N60-70$^{\circ}$W in southern Korea, and Pyungan and Hwanghae Province in northern Korea. The mechanism of 14 larger earthquakes in and around the Korean Peninsula since 1936 show predominant strike-slip faulting together with minor thrust component. This indicates horizontal compression is dominant in and around the Korean Peninsula.