• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.4
• /
• pp.401-409
• /
• 2009

This paper presents a method of calculating the stress intensity factor (K) and crack propagation direction (${\theta}_0$) at the crack-tip that is associated with delamination in the large scale integration(LSI) package. To establish a reasonable strength evaluation method and life prediction, it is necessary to assess fracture parameters under various fracture conditions. Therefore, we conducted quantitative stress singularity analysis considering thermal stress simulating the changes of crack length (a), (h) and (v) in delamination using the 2-dimensional elastic boundary element method (BEM), and from these results predicted crack propagation direction and path.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.1
• /
• pp.161-173
• /
• 1999

Settlement analysis based on oedometer test results with or without Skempton-Bjerrum's modification method ( widely used for practical purposes when estimating consolidation settlements of soft clay deposits) has shortcomings that it cannot simulate real stress states and deformation behaviors of soils in case that in-situ loading and deformation conditions are not 1-dimensional. In this study, the stress path method, reflecting various probable stress paths, was employed to normally - consolidated kaolinite samples by using automated triaxial testing device which can control stress paths automatically. From this experimental study, elastic, consolidation, secondary compression and pore pressure development - dissipation behaviors under various stress paths were analyzed and deformation characteristics of soft clays, which can be the basis of rational estimation of settlements, were studied. Also by comparing results of stress path tests with those of 1-dimensional consolidation tests, limitations and problems of conventional methods were clarified.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.329-341
• /
• 2008

The psychosocial stress and musculoskeletal disorders(MSDs) have been one of major health problems for hospital workers. This study tried to understand the relationship between symptoms associated with MSDs and risk factors such as working posture, job stress, psychosocial stress and fatigue. A total number of 655 hospital workers participated in this study. Specifically, REBA was applied for evaluating working posture and a checklist prepared by KOSHA(Korean Occupational Safety and Health Agency) was used for symptom survey. A questionnaire from KOSHA was also used for collecting data associated with job stress, psychosocial stress and fatigue. All these data were formulated and modeled by path analysis which was one of major statistical tools in this study. Specifically, path analysis for the data we collected came up with several major findings. The risk scores from working posture based on REBA had indirect effects via fatigue factor(MFS) as well as direct effects on symptoms. The factors associated with job stress(KOSS) and psychosocial stress(PWI-SF) had significant effects on symptoms. Specifically, indirect effect of job stress factors via fatigue factors(MFS) had bigger than that of direct effect of job stress on symptom.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.7
• /
• pp.1097-1105
• /
• 1997

Because of the existence of stress interaction field made by other defects and propagating cracks, the structure may be weakened. Therefore in this study, the crack behavior in the interaction field made by two different cracks is studied experimentally. In the experiment, vertical distance between two cracks and applied stress are varied to make different stress interacted field. In addition, the effect of plastic zone is used to examine crack propagation path and rate. Three types of crack propagation in the interacted field were found, and crack propagating path and rate of two cracks were significantly changed according to different applied stress as each crack propagates. And the results are attributed to the effect of the size and shape of the plastic zone.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.2 s.75
• /
• pp.243-251
• /
• 2005

The fracture mechanics analysis of a crack in a weld must consider residual stress generated during welding. The standard definition of the J-integral requires a path dependent value in the presence of a residual stress field. Therefore, it is necessary to develop a path independent J-integral definition for a crack in a residual stress field. This paper addresses the modification of the Rice-J-integral to produce a path- independent J-integral when residual stresses and external forces are present. The residual stress problem is treated as an initial strain problem and the J-integral proposed for this type of problems is used. A program which can evaluate the J-integral for a crack in a weld is developed using the proposed J-integral definition. The situation when only residual stress is present is examined as is the case when mechanical stresses are applied in conjunction with a residual stress.

• Transactions of Materials Processing
• /
• v.17 no.6
• /
• pp.420-428
• /
• 2008

The effect of loading path changes on the strain and mechanical properties of a commercial pure aluminum was studied using flat rolling and groove rolling. Material during flat rolling undergoes a continuous monotonic compressive loading, while one during groove rolling experiences a series of cross compressive loading. Four-pass flat rolling and groove rolling experiment are designed such that the aluminum undergoes the same amount of the strain at each pass. The rolling experiment was performed at room temperatures. Specimens for tensile test are fabricated from the plate and bar rolled. In addition, the strain distribution for the plate and bar cold rolled specimens is also calculated by finite element method. The results reveal that differences of loading path attributed by monotonic loading(flat rolling) and cross loading(groove rolling) significantly influence the mechanical properties such as yield stress, ultimate tensile stress, strain hardening and elongation. It is clear that the different loading path can give raise to change the deformation history, although it is deformed with same amount of strain for same material.

• Computers and Concrete
• /
• v.29 no.5
• /
• pp.303-321
• /
• 2022

The current design equations for predicting the torsional capacity of RC members underestimate the torsional strength of under-reinforced members and overestimate the torsional strength of over-reinforced members. This is because the design equations consider only the yield strength of torsional reinforcement and the cross-sectional properties of members in determining the torsional capacity. This paper presents an analytical model to predict the thickness of shear flow path in RC beams subjected to pure torsion. The analytical model assumes that torsional reinforcement resists torsional moment with a sufficient deformation capacity until concrete fails by crushing. The ACI 318 code is modified by applying analytical results from the proposed model such as the average stress of torsional reinforcement and the effective gross area enclosed by the shear flow path. Comparison of the calculated and observed torsional strengths of existing 129 test beams showed good agreement. Two design variables related to the compressive strength of concrete in the proposed model are approximated for design application. The accuracy of the ACI 318 code for the over-reinforced test beams improved somewhat with the use of the approximations for the average stresses of reinforcements and the effective gross area enclosed by the shear flow path.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.155-162
• /
• 2006

Space is integrated or segment with organic formation by circulation path. It estimates important problem to grasp as factor that promote movement of visitor and space organization without grasping circulation as connection relation about simple space function from these viewpoint, is a thing which this study does not cause confusion to visitor's circulation path through data that analyze form of space connection and visitor's circulation path as quantitative in museum space and layout form that access by easy each unit exhibition grasps what it is. This study does factor grasping for guideline and inspection circulation path of layout by purpose in exhibition space on the basis of analytical result that grasps connection form between exhibition area that grasp laying stress on visitor's movement and appears in space through follow-up survey for circulation path of museum exhibition area. Space connection form that is expose by sequence of investigation and analysis(II) estimates on constituent affecting to visitor's circulation, and these do not speak for all space connection forms at the museum, but may systematize typology about connection form of unit spaces to utilize by indicator pointer of space planning if continue study to various spatial sphere more than hereafter. Unit exhibition area, divide connection form of space by grid and tree and laying stress on this quantitative data by spectator follow-up survey comparison and Estimate that space connection form provides partial basis of judgement for supposition that can promote direction and circulation path about visitor's movement if summarize result of investigation and analysis (III).

• Journal of Gifted/Talented Education
• /
• v.22 no.3
• /
• pp.779-800
• /
• 2012

This study is to understand gifted students' suicidal ideation and its related variables among gifted students. For this, this study explores the relationship between maladaptive perfectionism of gifted students and suicidal ideation, confirming mediating effects of depression and academic stress. For the study 320 middle school students who were identified as the gifted at a gifted education center affiliated with the university. The results are summarized as follows. First, the fit of measurement model was found to be ${\chi}^2$=228.571(df=110, p=.000), CFI=.972, TLI=.966, RMSEA=.058, indicating most of fit indexes were acceptable. Second, suicidal ideation was found a significant positive relationship with maladaptive perfectionism, depression, academic stress. Third, as a result of examining path coefficient, it was found to be influenced significantly by all of the path from maladaptive perfectionism to depression and academic stress, the path from depression to suicidal ideation, the path from academic stress to suicidal ideation. However, the path from maladaptive perfectionism to suicidal ideation was found to be statistically insignificant. Fourth, the result showed that depression and academic stress worked as complete mediators between maladaptive perfectionism and suicidal ideation. These findings give useful information about affective aspects of gifted adolescents in hard circumstances. The results of the study will be helpful in devising consultation and educational programs for the gifted who are in danger of suicide.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.211-214
• /
• 2000

Filament wound pressure vessels have been studied for the efficient design tool to consider the variation of fiber angles through-the thickness direction. Filament winding patterns were simulated from semi-geodesic fiber path equation to calculate fiber path on arbitrary surface. Finite element analyses were performed considering fiber angle variation in longitudinal and thickness directions by ABAQUS. For the finite element modeling of the pressure tank, the 3-dimensional layered solid element was utilized. From the stress results of pressure tanks, maximum stress criterion in transverse direction was applied to modify material properties for failed region. In the end of each load increment, resultant layer stresses were compared with a failure criterion and properties were reduced to 1/10 for a failed layer. Results of progressive failure analysis were compared with two experimental data.