• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.836-840
• /
• 2006

Design optimization of layered plates bonding process is conducted to achieve high product quality by considering uncertainties in a manufacturing process. During the cooling process of the sequential sub-processes, different thermal expansion coefficients lead to residual stress and displacement. thus resulting in defects on the surface of the adherent. So robust process optimization is performed to minimize the residual stress mean and variation of the assembly while constraining the distortion as well as the instantaneous maximum stress to the allowable limits. In robust process optimization, the dimension reduction (DR) method is employed to quantify both reliability and quality of the layered plate bonding. Using this method. the average and standard deviation is estimated. Response surface is constructed using the statistical data obtained by the DRM for robust objectives and constraints. from which the optimum solution is obtained.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1774-1781
• /
• 2007

In this study, Matsuda's formula, which has been used to evaluate the acting load on the concrete pillar in 2-Arch tunnels, is investigated and a load reduction factor $({\alpha})$, which has been estimated from numerical parametric studies, is proposed for a better design of 2-Arch tunnels in the future. Numerical parametric studies show that the concrete pillar is subjected to a stress concentration on the excavation side during the first tunnel driving and when tunnel excavation is completed, the induced stress on the pillar in a poor quality of ground condition is 1.5 to 1.8 times the stress developed during the first tunnel driving. In addition, the numerical studies indicate that the acting load on the pillar is in the range of $14{\sim}83%$ of the load estimated by Matsuda's formula. From these results, a load reduction factor $({\alpha})$ is determined and it would make 2-Arch tunnel design more economically.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.88-90
• /
• 2006

Conventional sustaining driver (SD) of plasma display panel (PDP) employing auxiliary circuits on both side of a H-bridge inverter increases volume of PDP with cost. To solve this problem, a new single sustaining driver (SSD), which utilize only one side of auxiliary circuit is proposed. Moreover, using the voltage stress reduction technique (VSRT), the proposed SSD effectively reduces switch voltage stress with a simple structure.

• Korean Journal of Health Education and Promotion
• /
• 제20권3호
• /
• pp.91-108
• /
• 2003

Psychological stress is a growing issue in work stress research because work stressors are closely related to depression； and depression, in turn, decreases organizational effectiveness. Considering such causal relationships of work stress, a comprehensive source to control work stress is needed for worksite mental well-being. This study was conducted to identify how social support at work controlled work stress and which characteristics of social support were effective on work stress reduction. The study participants were 240 workers employed in a public hospital in Georgia, U.S.A self-administered survey was given to employees with their pay slips, and followed by a hospital wide voice reminder for 7 days. Surveys were conducted over a 20-day period. The questionnaires asked about job demands, job control, social support at work, depression, job performance, absenteeism, and demographics. The social support construct was structured on the source of support at work and the kinds of support were provided. Statistical analyses were conducted in the structural equation modeling approach. Social support at work was directly related to high job control, low depression, and high job performance. High score of social support at work were significantly associated with high job control, low depressive symptoms, and high job performance. By source of support, only organizational support was positively related to high job control. Organizational support was more effective than supervisor and coworker support. Any stressors and their outcomes were not differenciated by the kinds of support. This result indicated that job control was influenced more by the source of support than the kinds of support provided at work； and the most efficient source of support was the organization. Organizational support was a strong factor in improving workers" perceived controllability of their jobs from a work stress reduction perspective.tive.

• Journal of Industrial Convergence
• /
• 제22권3호
• /
• pp.137-154
• /
• 2024

This study aimed to determine the characteristics of maternal stress during the COVID-19 pandemic. This review collected data from May 1 to August 10, 2023, focusing on literature published from 2020 on wards in English or Korean using key biomedical (PubMed, Embase, Cochrane Library, and CINAHL) and major Korean databases (RISS, KISS, and the National Library of Korea). The searched terms were "pregnan*," "maternity," "COVID," "corona," "pandemic," "infection," and "stress," as well as their Korean equivalents. In total, 13 papers were selected. The maternal stress level generally increased during the COVID-19 pandemic. The primary factors affecting maternal stress were the medical, psychological, and socio-economic factors. Interventions for stress reduction in pregnant women during the pandemic were found to be effective, such as online education and training This study can be used as a reference for developing stress reduction programs to prepare for novel infectious disease emergencies.

• Transactions of Materials Processing
• /
• 제26권3호
• /
• pp.162-167
• /
• 2017

The tensile surface residual stress in the multi-pass drawn wire deteriorates the mechanical properties of the wire. Therefore, the evaluation of the residual stress is very important. Especially, the axial residual stress on the wire surface is the highest. Therefore, the objective of this study was to propose an axial surface residual stress prediction model of the multi-pass drawn steel wire. In order to achieve this objective, an elastoplastic finite element (FE) analysis was carried out to investigate the effect of semi-die angle and reduction ratio of the axial surface residual stress. By using the results of the FE analysis, a surface residual stress prediction model was proposed. In order to verify the effectiveness of the prediction model, the predicted residual stress was compared to that of a wire drawing experiment.

• Journal of Korean Neurosurgical Society
• /
• 제47권5호
• /
• pp.345-351
• /
• 2010

Objective : In this study, the Mindfulness Based Stress Reduction (MBSR) program was applied to patients presenting with depression and anxiety after surgery from spontaneous subarachnoid hemorrhage (SAH) and the effects were assessed. Methods : The subjects were patients admitted for cerebral aneurysm rupture and treated by means of surgery from March to December, 2007. More than 6 months had passed after surgery, without any special lesions showing up on computed tomography (CT), and the Glasgow outcome scale (GOS) was 5 points. Among patients with anxiety and depression symptoms, 11 patients completed the program. The MBSR program was conducted once a week, 2.5 hours each, for 8 weeks. The evaluation criteria were : 1) the Beck Depression Inventory (BDI): it measures the type and level of depression, 2) the State-Trait Anxiety Inventory : the anxiety state of normal adults without mental disorder, and 3) Heart Rate Variability (HRV) : the influence of the autonomous nervous system on the sinoarterial node varies continuously in response to the change of the internal/external environment. Results : The BDI value was decreased from 18.5 ${\pm}$ 10.9 to 9.5 ${\pm}$ 7.1 (p = 0.013) : it was statistically significant, and the depression level of patients was lowered. The state anxiety was decreased from 51.3 ${\pm}$ 13.9 to 42.3 ${\pm}$ 15.2; the trait anxiety was reduced from 50.9 ${\pm}$ 12.3 to 41.3 ${\pm}$ 12.8, and a borderline significant difference was shown (p = 0.091, p = 0.056). In other words, after the treatment, although it was not statistically significant, a decreased tendency in anxiety was shown. In the HRV measurement, standard deviation normal to normal (SDNN), square root of the square root of the mean sum of squared differences between adjacent normal to normal intervals (RMSSD), and total power (TP) showed significant increase, Physical Stress Index (PSI) showed a significant reduction, and thus an improvement in the homeostatic control mechanism of the autonomic nervous system was ween. Conclusion : The MBSR program was applied to the patients showing anxiety and depression reaction after SAH treatment, and a reduction in depression symptoms and physiological reactions were observed. The application of the MBSR program may be considered as a new tool in improving the quality of life for patients after surgery.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.1036-1041
• /
• 1998

A novel ZCS high frequency inverter in complex resonance applied for reduction of PM is developed. This inverter is suppressed the switching stress by using complex resonance. The stable operation is realized by ZCS using overlapping commutation phenomenon. The ZCS characteristics are investigated based on numerical analysis and experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.937-938
• /
• 2010

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제22권12호
• /
• pp.1647-1656
• /
• 1998

The drag reduction is the phenomenon that occurs only when the shear stress from the wall of pipe is beyond the critical point. The drag reduction increase as the molecular weight, concentration of the polymer and Reynolds number increase, but it is limited by Virk's maximum drag reduction asymptote. Because of the strong shear force for the polymer on the turbulent flow, the molecular weight and the drag reduction do not decrease. Such mechanical degradation of the polymer occurs in all polymer solvent systems. This paper is to identify and develop high performance polymer additives for fluid transportations with the benefits of turbulent drag reduction. In addition, drag reduction in vertical flow by measuring the pressure drop and local void fraction on vertical-up flow of close system is evaluated.